- 您现在的位置：买卖IC网 > PDF目录44043 > LK5320-7D1 (POWER-ONE INC) 2-OUTPUT 150 W AC-DC PWR FACTOR CORR MODULE PDF资料下载
参数资料
| 型号： | LK5320-7D1 |
| 厂商： | POWER-ONE INC |
| 元件分类： | 电源模块 |
| 英文描述： | 2-OUTPUT 150 W AC-DC PWR FACTOR CORR MODULE |
| 封装： | HEAT SINK, METAL, CASE K02 |
| 文件页数： | 19/28页 |
| 文件大小： | 1215K |
| 代理商： | LK5320-7D1 |
第1页第2页第3页第4页第5页第6页第7页第8页第9页第10页第11页第12页第13页第14页第15页第16页第17页第18页当前第19页第20页第21页第22页第23页第24页第25页第26页第27页第28页
K Series
AC-DC Converters >100 Watt
Rugged Environment
Edition 4/4.99
26/28
MELCHER
The Power Partners.
Vo1+
Vo1–
V
UV
IV
Rp
Input
11009
V ACFAIL Signal (VME)
Available for units with
Uo1 = 5.1 V.
This option denes an undervoltage monitoring circuit for
the input or input and main output voltage equivalent to op-
tion D and generates the ACFAIL signal (V signal) which
conforms to the VME standard.
The low state level of the ACFAIL signal is specied at a
sink current of
IV ≤ 48 mA to UV ≤ 0.6 V (open-collector out-
put of a NPN transistor). The pull-up resistor feeding the
open-collector output should be placed on the VME back
plane.
After the ACFAIL signal has gone low, the VME standard
requires a hold-up time
th of at least 4 ms before the 5.1 V
output drops to 4.875 V when the output is fully loaded. This
hold-up time
th is provided by the internal input capaci-
tance. See also g.:
Hold-up Time versus Output Power.
Table 20: Undervoltage monitor functions
V output
Monitoring
Minimum adjustment
(VME compatible)
Ui
Uo1
range of threshold level
Uti
Uto
V2
yes
no
355V DC 1
–
V3
yes
355V DC 1 0.95...0.985
Uo1 2
1 Option D monitors the boost regulator output voltage. The trig-
ger level is adjusted in the factory to 355 V DC.
2 Fixed value between 95% and 98.5% of Uo1.
V output (V2, V3):
Connector pin V is internally connected to the open collec-
tor of a NPN transistor. The emitter is connected to the
negative potential of output 1.
UV ≤ 0.6 V (logic low) corre-
sponds to a monitored voltage level (
Ui and/or Uo1) <Ut.
The current
IV through the open collector should not ex-
ceed 50 mA. The NPN output is not protected against exter-
nal overvoltages.
UV should not exceed 60 V.
Ui, Uo1 status
V output,
UV
Ui or Uo1 < Ut
low, L,
UV ≤ 0.6 V at IV = 50 mA
Ui and Uo1 > Ut + Uh
high, H,
IV ≤ 25 A at UV = 5.1 V
Fig. 39
Output conguration of options V2 and V3
Option V operates independently of the built-in input under-
voltage lock-out circuit. A logic "low" signal is generated at
pin 20 as soon as one of the monitored voltages drops be-
low the preselected threshold level
Ut. The return for this
signal is Vo1–. The V output recovers when the monitored
voltage(s) exceed(s)
Ut + Uh. The threshold level Uti is ad-
justed in the factory to 355 V DC. The threshold level
Uto
either is adjusted during manufacture to a determined cus-
tomer specied value.
相关PDF资料 |
PDF描述 |
|---|---|
| LK5320-7D7TB2 | 2-OUTPUT 150 W AC-DC PWR FACTOR CORR MODULE |
| LK5320-7D8TB1 | 2-OUTPUT 150 W AC-DC PWR FACTOR CORR MODULE |
| LK5320-7ED7B1 | 2-OUTPUT 150 W AC-DC PWR FACTOR CORR MODULE |
| LK5320-7PD0B2 | 2-OUTPUT 150 W AC-DC PWR FACTOR CORR MODULE |
| LK5320-7RD1TB2 | 2-OUTPUT 150 W AC-DC PWR FACTOR CORR MODULE |
相关代理商/技术参数 |
参数描述 |
|---|---|
| LK5320-7R | 功能描述:线性和开关式电源 Euro-Cassette 144W (2x 12V) RoHS:否 制造商:TDK-Lambda 产品:Switching Supplies 开放式框架/封闭式:Enclosed 输出功率额定值:800 W 输入电压:85 VAC to 265 VAC 输出端数量:1 输出电压（通道 1）:20 V 输出电流（通道 1）:40 A 商用/医用: 输出电压（通道 2）: 输出电流（通道 2）: 安装风格:Rack 长度: 宽度: 高度: |
| LK5320-9ER | 制造商:Power-One 功能描述:AC/DC PS DUAL-OUT 12V/12V 6A/6A 280W 15PIN - Bulk |
| LK-54H-SS18(LF)(SN) | 制造商:JST Manufacturing 功能描述: |
| LK5540-7R | 功能描述:线性和开关式电源 150W 15V 5A OUT AC-DC CONVERTER RoHS:否 制造商:TDK-Lambda 产品:Switching Supplies 开放式框架/封闭式:Enclosed 输出功率额定值:800 W 输入电压:85 VAC to 265 VAC 输出端数量:1 输出电压（通道 1）:20 V 输出电流（通道 1）:40 A 商用/医用: 输出电压（通道 2）: 输出电流（通道 2）: 安装风格:Rack 长度: 宽度: 高度: |
| LK5540-9ER | 制造商:Power-One 功能描述:ACDC - Bulk |
发布紧急采购，3分钟左右您将得到回复。