- 您现在的位置：买卖IC网 > PDF目录240305 > LKP5742-7PD5TB1 2-OUTPUT 250 W AC-DC PWR FACTOR CORR MODULE PDF资料下载
参数资料
| 型号： | LKP5742-7PD5TB1 |
| 元件分类： | 电源模块 |
| 英文描述： | 2-OUTPUT 250 W AC-DC PWR FACTOR CORR MODULE |
| 封装： | METAL, CASE K02, MODULE |
| 文件页数： | 2/23页 |
| 文件大小： | 534K |
| 代理商： | LKP5742-7PD5TB1 |
Cassette Style
AC-DC Converters
KP Series
Edition 01/01.2001
10/23
Battery Charging/Temperature Sensor
The LKP 5740-6R, LKP 5741-5R, LKP 5742-7R are in-
tended for lead acid battery charger applications. For an
optimum battery charging and life expectancy of the battery
an external temperature sensor may be connected to the
R-input. The sensor is mounted as close as possible to the
battery pole and adjusts the output voltage of the LKP unit
according to the temperature of the battery (which is related
to the load of the battery and the ambient temperature).
Depending on the cell voltage and the temperature coeffi-
cient of the battery, different sensor types are available.
For more information please ask Power-One.
Fig. 17
Dependance of output voltage vs. temperature for defined
temperature coefficient.
2.10
2.15
2.20
2.25
2.30
2.35
2.40
Cell voltage [V]
0
5
10
15
20
25
30
35
40
45
50
[
°C]
06123
Uo max
Uz = 2.27 V, –3.5 mV/K
Uz = 2.23 V, –3.5 mV/K
Uo nom
0
t
0
Inhibit
1
0.1
1
Uo/Uo nom
tr
tf
06001
Table 5: Inhibit characteristics
Characteristic
Conditions
min
typ
max Unit
Uinh Inhibit
Uo = on
Ui min…Ui max
–50
0.8
V
voltage
Uo = off
2.4
50
Iinh
Inhibit current
Uinh = 0
–400
A
tr
Rise time
30
ms
tf
Fall time
depending on
Io
Fig. 16
Output response as a function of inhibit control
Auxiliary Functions
i Inhibit for Remote On and Off
Note: With open i input: Output is disabled (
Uo = off).
The outputs of the module may be enabled or disabled by
means of a logic signal (TTL, CMOS, etc.) applied between
the inhibit input i and the negative pin of output 1 (Vo1–). In
systems with several units, this feature can be used, for ex-
ample, to control the activation sequence of the converters.
If the inhibit function is not required, connect the inhibit pin
18 to pin 14 to enable the outputs (active low logic, fail
safe). For output response refer to:
Hold-up Time and Out-
put Response.
Vi+
Vi–
Vo–
i
Vo+
Iinh
Uinh
06031
1.6
0.8
0
–0.8
–50
Uinh [V]
Iinh [mA]
–30
0
–10
10
30
50
2.0
1.2
0.4
–0.4
Uinh = 0.8 V
Uo = on
Uo = off
Uinh = 2.4 V
06032
Fig. 14
Definition of Uinh and Iinh.
Fig. 15
Typical inhibit current Iinh versus inhibit voltage Uinh
相关PDF资料 |
PDF描述 |
|---|---|
| LKP5742-7RD0TB1 | 2-OUTPUT 250 W AC-DC PWR FACTOR CORR MODULE |
| LK1001-7PDDB1 | 1-OUTPUT 150 W AC-DC REG PWR SUPPLY MODULE |
| LK1001-9EPDDTB1 | 1-OUTPUT 150 W AC-DC REG PWR SUPPLY MODULE |
| LK1301-7RDD | 1-OUTPUT 150 W AC-DC REG PWR SUPPLY MODULE |
| LK1301-9ERD4B2 | 1-OUTPUT 150 W AC-DC REG PWR SUPPLY MODULE |
相关代理商/技术参数 |
参数描述 |
|---|---|
| LKP5742-7R | 制造商:Power-One 功能描述:AC/DC PS SGL-OUT 50.5V TO 56.5V 4A 226W 15PIN - Bulk |
| LKQ1AF12TV5 | 制造商:Panasonic Electric Works 功能描述:PCB slim relay,SPNO,TV5,flux pf,5A 12Vdc |
| LKQ1AF12TV5T | 制造商:Panasonic Electric Works 功能描述: |
| LKQ1AF12TV8 | 制造商:Panasonic Electric Works 功能描述:PCB slim relay,SPNO,TV8,flux pf,8A 12Vdc |
| LKQ1AF-12V-TV-5 | 功能描述:通用继电器 QUIET TYPE, HIGH SENSITIVITY 250mW, SLIM RoHS:否 制造商:Omron Electronics 触点形式:1 Form A (SPST-NO) 触点电流额定值:150 A 线圈电压:24 VDC 线圈电阻:144 Ohms 线圈电流:167 mA 切换电压:400 V 安装风格:Chassis 触点材料: |
发布紧急采购，3分钟左右您将得到回复。