参数资料
型号: LM2577M-12/NOPB
厂商: NATIONAL SEMICONDUCTOR CORP
元件分类: 稳压器
英文描述: 6 A SWITCHING REGULATOR, 62 kHz SWITCHING FREQ-MAX, PDSO24
封装: 0.300 INCH, SO-24
文件页数: 14/31页
文件大小: 1406K
代理商: LM2577M-12/NOPB
Application Hints (Continued)
FLYBACK REGULATOR
A Flyback regulator can produce single or multiple output
voltages that are lower or greater than the input supply
voltage. Figure 18 shows the LM1577/LM2577 used as a
flyback regulator with positive and negative regulated out-
puts. Its operation is similar to a step-up regulator, except the
output switch contols the primary current of a flyback trans-
former. Note that the primary and secondary windings are
out of phase, so no current flows through secondary when
current flows through the primary. This allows the primary to
charge up the transformer core when the switch is on. When
the switch turns off, the core discharges by sending current
through the secondary, and this produces voltage at the
outputs. The output voltages are controlled by adjusting the
peak primary current, as described in the step-up regulator
section.
Voltage and current waveforms for this circuit are shown in
Figure 17, and formulas for calculating them are given in
FLYBACK REGULATOR DESIGN PROCEDURE
1. Transformer Selection
A family of standardized flyback transformers is available for
creating flyback regulators that produce dual output volt-
ages, from ±10V to ±15V, as shown in Figure 18. Figure
20lists these transformers with the input voltage, output
voltages and maximum load current they are designed for.
2. Compensation Network (C
C,RC) and
Output Capacitor (C
OUT) Selection
As explained in the Step-Up Regulator Design Procedure,
C
C,RC and COUT must be selected as a group. The following
procedure is for a dual output flyback regulator with equal
turns ratios for each secondary (i.e., both output voltages
have the same magnitude). The equations can be used for a
single output regulator by changing
I
LOAD(max) to ILOAD(max)
in the following equations.
A. First, calculate the maximum value for R
C.
Where
I
LOAD(max) is the sum of the load current (magni-
tude) required from both outputs. Select a resistor less than
or equal to this value, and no greater than 3 k
.
B. Calculate the minimum value for
C
OUT (sum of COUT
at both outputs) using the following two equations.
The larger of these two values must be used to ensure
regulator stability.
01146817
FIGURE 17. Flyback Regulator Waveforms
LM1577/LM2577
www.national.com
21
相关PDF资料
PDF描述
LM2577NADJ 6 A SWITCHING REGULATOR, 62 kHz SWITCHING FREQ-MAX, PDIP24
LM2577S-15/NOPB 6 A SWITCHING REGULATOR, 62 kHz SWITCHING FREQ-MAX, PSSO5
LM2577SADJ 6 A SWITCHING REGULATOR, 62 kHz SWITCHING FREQ-MAX, PSSO5
LM2577S-12X 6 A SWITCHING REGULATOR, 62 kHz SWITCHING FREQ-MAX, PSSO5
LM2577TADJFLOWLB03 6 A SWITCHING REGULATOR, 62 kHz SWITCHING FREQ-MAX, PZFM5
相关代理商/技术参数
参数描述
LM2577M-15 功能描述:IC REG MULTI CONFIG 15V 24-SOIC RoHS:是 类别:集成电路 (IC) >> PMIC - 稳压器 - DC DC 开关稳压器 系列:SIMPLE SWITCHER® 产品培训模块:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 标准包装:1 系列:- 类型:降压(降压) 输出类型:固定 输出数:1 输出电压:3.3V 输入电压:4.5 V ~ 24 V PWM 型:- 频率 - 开关:- 电流 - 输出:125mA 同步整流器:无 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:SOT-23-6 包装:Digi-Reel® 供应商设备封装:SOT-6 其它名称:MAX1836EUT33#TG16DKR
LM2577M-ADJ 功能描述:直流/直流开关转换器 RoHS:否 制造商:STMicroelectronics 最大输入电压:4.5 V 开关频率:1.5 MHz 输出电压:4.6 V 输出电流:250 mA 输出端数量:2 最大工作温度:+ 85 C 安装风格:SMD/SMT
LM2577M-ADJ/NOPB 功能描述:直流/直流开关转换器 RoHS:否 制造商:STMicroelectronics 最大输入电压:4.5 V 开关频率:1.5 MHz 输出电压:4.6 V 输出电流:250 mA 输出端数量:2 最大工作温度:+ 85 C 安装风格:SMD/SMT
LM2577MX-12 功能描述:IC REG MULTI CONFIG 12V 24SOIC RoHS:是 类别:集成电路 (IC) >> PMIC - 稳压器 - DC DC 开关稳压器 系列:SIMPLE SWITCHER® 产品培训模块:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 标准包装:1 系列:- 类型:降压(降压) 输出类型:固定 输出数:1 输出电压:3.3V 输入电压:4.5 V ~ 24 V PWM 型:- 频率 - 开关:- 电流 - 输出:125mA 同步整流器:无 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:SOT-23-6 包装:Digi-Reel® 供应商设备封装:SOT-6 其它名称:MAX1836EUT33#TG16DKR
LM2577MX-15 功能描述:IC REG MULTI CONFIG 15V 24SOIC RoHS:是 类别:集成电路 (IC) >> PMIC - 稳压器 - DC DC 开关稳压器 系列:SIMPLE SWITCHER® 产品培训模块:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 标准包装:1 系列:- 类型:降压(降压) 输出类型:固定 输出数:1 输出电压:3.3V 输入电压:4.5 V ~ 24 V PWM 型:- 频率 - 开关:- 电流 - 输出:125mA 同步整流器:无 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:SOT-23-6 包装:Digi-Reel® 供应商设备封装:SOT-6 其它名称:MAX1836EUT33#TG16DKR