- 您现在的位置：买卖IC网 > PDF目录30750 > LM3875MDC (NATIONAL SEMICONDUCTOR CORP) 56 W, 1 CHANNEL, AUDIO AMPLIFIER, UUC PDF资料下载
参数资料
| 型号： | LM3875MDC |
| 厂商： | NATIONAL SEMICONDUCTOR CORP |
| 元件分类： | 音频／视频放大 |
| 英文描述： | 56 W, 1 CHANNEL, AUDIO AMPLIFIER, UUC |
| 封装： | DIE |
| 文件页数： | 2/21页 |
| 文件大小： | 582K |
| 代理商： | LM3875MDC |
Typical Performance Characteristics (Continued)
Application Information
GENERAL FEATURES
Under-Voltage Protection: Upon system power-up the
under-voltage Protection Circuitry allows the power supplies
and their corresponding caps to come up close to their full
values before turning on the LM3875 such that no DC output
spikes occur. Upon turn-off, the output of the LM3875 is
brought to ground before the power supplies such that no
transients occur at power-down.
Over-Voltage Protection: The LM3875 contains overvolt-
age protection circuitry that limits the output current to ap-
proximately 4Apeak while also providing voltage clamping,
though not through internal clamping diodes. The clamping
effect is quite the same, however, the output transistors are
designed to work alternately by sinking large current spikes.
SPiKe Protection: The LM3875 is protected from instanta-
neous peak-temperature stressing by the power transistor
array. The Safe Operating Area graph in the Typical Perfor-
mance Characteristics section shows the area of device
operation where the SPiKe Protection Circuitry is not en-
abled. The waveform to the right of the SOA graph exempli-
fies how the dynamic protection will cause waveform distor-
tion when enabled.
Thermal Protection: The LM3875 has a sophisticated ther-
mal protection scheme to prevent long-term thermal stress
to the device. When the temperature on the die reaches
165C, the LM3875 shuts down. It starts operating again
when the die temperature drops to about 155C, but if the
temperature again begins to rise, shutdown will occur again
at 165C. Therefore the device is allowed to heat up to a
relatively high temperature if the fault condition is temporary,
but a sustained fault will cause the device to cycle in a
Schmitt Trigger fashion between the thermal shutdown tem-
perature limits of 165C and 155C. This greatly reduces the
stress imposed on the IC by thermal cycling, which in turn
improves its reliability under sustained fault conditions.
Since the die temperature is directly dependent upon the
heat sink, the heat sink should be chosen as discussed in
the Thermal Considerations section, such that thermal
shutdown will not be reached during normal operation. Using
the best heat sink possible within the cost and space con-
straints of the system will improve the long-term reliability of
any power semiconductor device.
THERMAL CONSIDERATIONS
Heat Sinking
The choice of a heat sink for a high-power audio amplifier is
made entirely to keep the die temperature at a level such
that the thermal protection circuitry does not operate under
normal circumstances. The heat sink should be chosen to
dissipate the maximum IC power for a given supply voltage
and rated load.
With high-power pulses of longer duration than 100 ms, the
case temperature will heat up drastically without the use of a
heat sink. Therefore the case temperature, as measured at
the center of the package bottom, is entirely dependent on
Power Supply Rejection
Ratio
DS011449-44
Common-Mode Rejection
Ratio
DS011449-45
Large Signal Response
DS011449-46
Pulse Response
DS011449-47
Open Loop
Frequency Response
DS011449-48
LM3875
www.national.com
10
相关PDF资料 |
PDF描述 |
|---|---|
| LM3876CCT | 40 W, 1 CHANNEL, AUDIO AMPLIFIER, PSFM11 |
| LM3876DWF | 56 W, 1 CHANNEL, AUDIO AMPLIFIER, UUC |
| LM3876MWC | 56 W, 1 CHANNEL, AUDIO AMPLIFIER, UUC |
| LM3876MDC | 56 W, 1 CHANNEL, AUDIO AMPLIFIER, UUC |
| LM387N | VIDEO PREAMPLIFIER, PDIP8 |
相关代理商/技术参数 |
参数描述 |
|---|---|
| LM3875T | 功能描述:IC AMP AUDIO PWR 56W AB TO220-11 RoHS:是 类别:集成电路 (IC) >> 线性 - 音頻放大器 系列:Overture™ 产品培训模块:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 标准包装:2,500 系列:DirectDrive® 类型:H 类 输出类型:耳机，2-通道（立体声） 在某负载时最大输出功率 x 通道数量:35mW x 2 @ 16 欧姆 电源电压:1.62 V ~ 1.98 V 特点:I²C，麦克风，静音，短路保护，音量控制 安装类型:表面贴装 供应商设备封装:25-WLP（2.09x2.09） 封装/外壳:25-WFBGA，WLCSP 包装:带卷 (TR) |
| LM3875T | 制造商:Texas Instruments 功能描述:IC AMP AUDIO 100W 3875 SIL-11 |
| LM3875T/NOPB | 制造商:Texas Instruments 功能描述:Audio Amp Speaker 1-CH Mono 56W Class-AB 11-Pin(11+Tab) TO-220 |
| LM3875TF | 功能描述:音频放大器 RoHS:否 制造商:STMicroelectronics 产品:General Purpose Audio Amplifiers 输出类型:Digital 输出功率: THD + 噪声: 工作电源电压:3.3 V 电源电流: 最大功率耗散: 最大工作温度: 安装风格:SMD/SMT 封装 / 箱体:TQFP-64 封装:Reel |
| LM3875TF/NOPB | 功能描述:音频放大器 RoHS:否 制造商:STMicroelectronics 产品:General Purpose Audio Amplifiers 输出类型:Digital 输出功率: THD + 噪声: 工作电源电压:3.3 V 电源电流: 最大功率耗散: 最大工作温度: 安装风格:SMD/SMT 封装 / 箱体:TQFP-64 封装:Reel |
发布紧急采购，3分钟左右您将得到回复。