- 您现在的位置：买卖IC网 > PDF目录44569 > LM4041DIM3-ADJX (NATIONAL SEMICONDUCTOR CORP) 1-OUTPUT TWO TERM VOLTAGE REFERENCE, 1.233 V, PDSO3 PDF资料下载
参数资料
| 型号： | LM4041DIM3-ADJX |
| 厂商： | NATIONAL SEMICONDUCTOR CORP |
| 元件分类： | 基准电压源/电流源 |
| 英文描述： | 1-OUTPUT TWO TERM VOLTAGE REFERENCE, 1.233 V, PDSO3 |
| 封装： | PLASTIC, TO-236AB, SOT-23, 3 PIN |
| 文件页数： | 19/19页 |
| 文件大小： | 774K |
| 代理商： | LM4041DIM3-ADJX |
LM4041-ADJ (Adjustable)
Electrical Characteristics (Extended Temperature Range) (Continued)
Note 1: Absolute Maximum Ratings indicate limits beyond which damage to the device may occur. Operating Ratings indicate conditions for which the device is
functional, but do not guarantee specific performance limits. For guaranteed specifications and test conditions, see the Electrical Characteristics. The guaranteed
specifications apply only for the test conditions listed. Some performance characteristics may degrade when the device is not operated under the listed test
conditions.
Note 2: The maximum power dissipation must be derated at elevated temperatures and is dictated by TJmax (maximum junction temperature), θJA (junction to
ambient thermal resistance), and TA (ambient temperature). The maximum allowable power dissipation at any temperature is PDmax =(TJmax TA)/θJA or the
number given in the Absolute Maximum Ratings, whichever is lower. For the LM4041, TJmax = 125C, and the typical thermal resistance (θJA), when board mounted,
is 326C/W for the SOT-23 package, 415C/W for the SC70 package and 180C/W with 0.4" lead length and 170C/W with 0.125" lead length for the TO-92 package.
Note 3: The human body model is a 100 pF capacitor discharged through a 1.5 k
resistor into each pin. The machine model is a 200 pF capacitor discharged
directly into each pin. All pins are rated at 2kV for Human Body Model, but the feedback pin which is rated at 1kV.
Note 4: Typicals are at TJ = 25C and represent most likely parametric norm.
Note 5: Limits are 100% production tested at 25C. Limits over temperature are guaranteed through correlation using Statistical Quality Control (SQC) methods.
The limits are used to calculate National’s AOQL.
Note 6: The boldface (over-temperature) limit for Reverse Breakdown Voltage Tolerance is defined as the room temperature Reverse Breakdown Voltage Tolerance
±[(
VRvT)(max T)(VR)]. Where, VR/T is the VR temperature coefficient, maxT is the maximum difference in temperature from the reference point of 25 C
to T MAX or TMIN, and VR is the reverse breakdown voltage. The total over-temperature tolerance for the different grades in the industrial temperature range where
max
T=65C is shown below:
A-grade: ±0.75% = ±0.1% ±100 ppm/C x 65C
B-grade: ±0.85% = ±0.2% ±100 ppm/C x 65C
C-grade: ±1.15% = ±0.5% ±100 ppm/C x 65C
D-grade: ±1.98% = ±1.0% ±150 ppm/C x 65C
E-grade: ±2.98% = ±2.0% ±150 ppm/C x 65C
The total over-temperature tolerance for the different grades in the extended temperature range where max
T = 100 C is shown below:
B-grade: ±1.2% = ±0.2% ±100 ppm/C x 100C
C-grade: ±1.5% = ±0.5% ±100 ppm/C x 100C
D-grade: ±2.5% = ±1.0% ±150 ppm/C x 100C
E-grade: ±4.5% = ±2.0% ±150 ppm/C x 100C
Therefore, as an example, the A-grade LM4041-1.2 has an over-temperature Reverse Breakdown Voltage tolerance of ±1.2V x 0.75% = ±9.2 mV.
Note 7: When VOUT ≤ 1.6V, the LM4041-ADJ in the SOT-23 package must operate at reduced IR. This is caused by the series resistance of the die attach between
the die (-) output and the package (-) output pin. See the Output Saturation (SOT-23 only) curve in the Typical Performance Characteristics section.
Note 8: Reference voltage and temperature coefficient will change with output voltage. See Typical Performance Characteristics curves.
Note 9: Load regulation is measured on pulse basis from no load to the specified load current. Ouput changes due to die temperature change must be taken into
account separately.-
Note 10: Thermal hysteresis is defined as the difference in voltage measured at +25C after cycling to temperature -40C and the 25C measurement after cycling
to temperature +125C.
LM4041
www.national.com
9
相关PDF资料 |
PDF描述 |
|---|---|
| LM4041EEM3-1.2X | 1-OUTPUT TWO TERM VOLTAGE REFERENCE, 1.225 V, PDSO3 |
| LM4041CIM3-1.2X | 1-OUTPUT TWO TERM VOLTAGE REFERENCE, 1.225 V, PDSO3 |
| LM4041EIM3-1.2X | 1-OUTPUT TWO TERM VOLTAGE REFERENCE, 1.225 V, PDSO3 |
| LM4041BIZ-1.2X | 1-OUTPUT TWO TERM VOLTAGE REFERENCE, 1.225 V, PBCY3 |
| LM4041BIM3-1.2X | 1-OUTPUT TWO TERM VOLTAGE REFERENCE, 1.225 V, PDSO3 |
相关代理商/技术参数 |
参数描述 |
|---|---|
| LM4041DIM3X-1.2 | 功能描述:基准电压& 基准电流 RoHS:否 制造商:STMicroelectronics 产品:Voltage References 拓扑结构:Shunt References 参考类型:Programmable 输出电压:1.24 V to 18 V 初始准确度:0.25 % 平均温度系数（典型值）:100 PPM / C 串联 VREF - 输入电压（最大值）: 串联 VREF - 输入电压（最小值）: 分流电流（最大值）:60 mA 最大工作温度:+ 125 C 封装 / 箱体:SOT-23-3L 封装:Reel |
| LM4041DIM3X-1.2/NOPB | 功能描述:基准电压& 基准电流 RoHS:否 制造商:STMicroelectronics 产品:Voltage References 拓扑结构:Shunt References 参考类型:Programmable 输出电压:1.24 V to 18 V 初始准确度:0.25 % 平均温度系数（典型值）:100 PPM / C 串联 VREF - 输入电压（最大值）: 串联 VREF - 输入电压（最小值）: 分流电流（最大值）:60 mA 最大工作温度:+ 125 C 封装 / 箱体:SOT-23-3L 封装:Reel |
| LM4041DIM3X12 | 制造商:NATIONAL 功能描述:* |
| LM4041DIM3XADJ | 制造商:NATIONAL 功能描述:New |
| LM4041DIM3X-ADJ | 功能描述:基准电压& 基准电流 RoHS:否 制造商:STMicroelectronics 产品:Voltage References 拓扑结构:Shunt References 参考类型:Programmable 输出电压:1.24 V to 18 V 初始准确度:0.25 % 平均温度系数（典型值）:100 PPM / C 串联 VREF - 输入电压（最大值）: 串联 VREF - 输入电压（最小值）: 分流电流（最大值）:60 mA 最大工作温度:+ 125 C 封装 / 箱体:SOT-23-3L 封装:Reel |
发布紧急采购，3分钟左右您将得到回复。