参数资料
型号: LM4850LDX/NOPB
厂商: NATIONAL SEMICONDUCTOR CORP
元件分类: 音频/视频放大
英文描述: 0.3 W, 2 CHANNEL, AUDIO AMPLIFIER, PDSO14
封装: 0.118 INCH, 0.80 MM PITCH, LLP-14
文件页数: 6/20页
文件大小: 1112K
代理商: LM4850LDX/NOPB
Application Information (Continued)
extend to at least onefifth the lower bandwidth limit and the
high frequency response must extend o at least five times
the upper bandwidth limit. The variation for both response
limits is 0.17dB, well within the ± 0.25dB desired limit. This
results in:
f
L = 100Hz / 5 = 20Hz
f
H = 20kHz x 5 = 100kHz
As stated in the External Components section, R
I in con-
junction with C
I create a highpass filter. Find the coupling
capacitor’s value using Equation 9.
C
I
≥ 1/(2πR
IfL)
(9)
C
I
≥ 1/(2π x 20k x 20Hz) = 0.397F
Use a 0.39F capacitor, the closest standard value.
The high frequency pole is determined by the product of the
desired high frequency pole, f
H, and the differential gain,
A
VD. With AVD = 3 and fH = 100kHz, the resulting GBWP =
150kHz which is much smaller than the LM4850 GBWP of
10MHz. This difference indicates that a designer can still use
the LM4850 at higher differential gains without bandwidth
limitations.
PCB LAYOUT AND SUPPLY REGULATION
CONSIDERATIONS FOR DRIVING 3
AND 4 LOADS
Power dissipated by a load is a function of the voltage swing
across the load and the load’s impedance. As load imped-
ance decreases, load dissipation becomes increasingly de-
pendant on the interconnect (PCB trace and wire) resistance
between the amplifier output pins and the load’s connec-
tions. Residual trace resistance causes a voltage drop,
which results in power dissipated in the trace and not in the
load as desired. For example, 0.1
trace resistance reduces
the output power dissipated by a 4
load from 2.0W to
1.95W. This problem of decreased load dissipation is exac-
erbated as load impedance decreases. Therefore, to main-
tain the highest load dissipation and widest output voltage
swing, PCB traces that connect the output pins to a load
must be as wide as possible.
Poor power supply regulation adversely affects maximum
output power. A poorly regulated supply’s output voltage
decreases with increasing load current. Reduced supply
voltage causes decreased headroom, output signal clipping,
and reduced output power. Even with tightly regulated sup-
plies, trace resistance creates the same effects as poor
supply regulation. Therefore, making the power supply
traces as wide as possible helps maintain full output voltage
swing.
LM4850
www.national.com
14
相关PDF资料
PDF描述
LM4850MMX/NOPB 0.3 W, 2 CHANNEL, AUDIO AMPLIFIER, PDSO10
LM4850MTX/NOPB 0.3 W, 2 CHANNEL, AUDIO AMPLIFIER, PDSO14
LM4851ITL/NOPB 1.1 W, 3 CHANNEL, AUDIO AMPLIFIER, PBGA18
LM4851LQ/NOPB 1.5 W, 3 CHANNEL, AUDIO AMPLIFIER, QCC24
LM4852LQ/NOPB 1.5 W, 3 CHANNEL, AUDIO AMPLIFIER, QCC24
相关代理商/技术参数
参数描述
LM4850MM 制造商:NSC 制造商全称:National Semiconductor 功能描述:Mono 1.5 W / Stereo 300 mW Power Amplifier
LM4850MM/NOPB 功能描述:IC AMP AUDIO PWR 1.9W AB 10MSOP RoHS:是 类别:集成电路 (IC) >> 线性 - 音頻放大器 系列:Boomer® 产品培训模块:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 标准包装:2,500 系列:DirectDrive® 类型:H 类 输出类型:耳机,2-通道(立体声) 在某负载时最大输出功率 x 通道数量:35mW x 2 @ 16 欧姆 电源电压:1.62 V ~ 1.98 V 特点:I²C,麦克风,静音,短路保护,音量控制 安装类型:表面贴装 供应商设备封装:25-WLP(2.09x2.09) 封装/外壳:25-WFBGA,WLCSP 包装:带卷 (TR)
LM4850MMX 功能描述:IC AMP AUDIO PWR 1.9W AB 10MSOP RoHS:是 类别:集成电路 (IC) >> 线性 - 音頻放大器 系列:Boomer® 产品培训模块:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 标准包装:2,500 系列:DirectDrive® 类型:H 类 输出类型:耳机,2-通道(立体声) 在某负载时最大输出功率 x 通道数量:35mW x 2 @ 16 欧姆 电源电压:1.62 V ~ 1.98 V 特点:I²C,麦克风,静音,短路保护,音量控制 安装类型:表面贴装 供应商设备封装:25-WLP(2.09x2.09) 封装/外壳:25-WFBGA,WLCSP 包装:带卷 (TR)
LM4850MMX/NOPB 制造商:Texas Instruments 功能描述:Audio Amp Headphone/Speaker 1-CH Mono/2-CH Stereo 1.5W Class-AB 10-Pin MSOP T/R
LM4850MT 制造商:NSC 制造商全称:National Semiconductor 功能描述:Mono 1.5 W / Stereo 300 mW Power Amplifier