- 您现在的位置：买卖IC网 > PDF目录30753 > LM4850MT/NOPB (NATIONAL SEMICONDUCTOR CORP) 0.3 W, 2 CHANNEL, AUDIO AMPLIFIER, PDSO14 PDF资料下载
参数资料
| 型号： | LM4850MT/NOPB |
| 厂商： | NATIONAL SEMICONDUCTOR CORP |
| 元件分类： | 音频／视频放大 |
| 英文描述： | 0.3 W, 2 CHANNEL, AUDIO AMPLIFIER, PDSO14 |
| 封装： | 4.40 MM, PLASTIC, TSSOP-14 |
| 文件页数： | 6/20页 |
| 文件大小： | 1112K |
| 代理商： | LM4850MT/NOPB |
Application Information (Continued)
extend to at least onefifth the lower bandwidth limit and the
high frequency response must extend o at least five times
the upper bandwidth limit. The variation for both response
limits is 0.17dB, well within the ± 0.25dB desired limit. This
results in:
f
L = 100Hz / 5 = 20Hz
f
H = 20kHz x 5 = 100kHz
As stated in the External Components section, R
I in con-
junction with C
I create a highpass filter. Find the coupling
capacitor’s value using Equation 9.
C
I
≥ 1/(2πR
IfL)
(9)
C
I
≥ 1/(2π x 20k x 20Hz) = 0.397F
Use a 0.39F capacitor, the closest standard value.
The high frequency pole is determined by the product of the
desired high frequency pole, f
H, and the differential gain,
A
VD. With AVD = 3 and fH = 100kHz, the resulting GBWP =
150kHz which is much smaller than the LM4850 GBWP of
10MHz. This difference indicates that a designer can still use
the LM4850 at higher differential gains without bandwidth
limitations.
PCB LAYOUT AND SUPPLY REGULATION
CONSIDERATIONS FOR DRIVING 3
AND 4 LOADS
Power dissipated by a load is a function of the voltage swing
across the load and the load’s impedance. As load imped-
ance decreases, load dissipation becomes increasingly de-
pendant on the interconnect (PCB trace and wire) resistance
between the amplifier output pins and the load’s connec-
tions. Residual trace resistance causes a voltage drop,
which results in power dissipated in the trace and not in the
load as desired. For example, 0.1
trace resistance reduces
the output power dissipated by a 4
load from 2.0W to
1.95W. This problem of decreased load dissipation is exac-
erbated as load impedance decreases. Therefore, to main-
tain the highest load dissipation and widest output voltage
swing, PCB traces that connect the output pins to a load
must be as wide as possible.
Poor power supply regulation adversely affects maximum
output power. A poorly regulated supply’s output voltage
decreases with increasing load current. Reduced supply
voltage causes decreased headroom, output signal clipping,
and reduced output power. Even with tightly regulated sup-
plies, trace resistance creates the same effects as poor
supply regulation. Therefore, making the power supply
traces as wide as possible helps maintain full output voltage
swing.
LM4850
www.national.com
14
相关PDF资料 |
PDF描述 |
|---|---|
| LM4850LD/NOPB | 0.3 W, 2 CHANNEL, AUDIO AMPLIFIER, PDSO14 |
| LM4850LDX/NOPB | 0.3 W, 2 CHANNEL, AUDIO AMPLIFIER, PDSO14 |
| LM4850MMX/NOPB | 0.3 W, 2 CHANNEL, AUDIO AMPLIFIER, PDSO10 |
| LM4850MTX/NOPB | 0.3 W, 2 CHANNEL, AUDIO AMPLIFIER, PDSO14 |
| LM4851ITL/NOPB | 1.1 W, 3 CHANNEL, AUDIO AMPLIFIER, PBGA18 |
相关代理商/技术参数 |
参数描述 |
|---|---|
| LM4850MTX/NOPB | 功能描述:IC AMP AUDIO PWR 1.9W AB 14TSSOP RoHS:是 类别:集成电路 (IC) >> 线性 - 音頻放大器 系列:Boomer® 产品培训模块:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 标准包装:2,500 系列:DirectDrive® 类型:H 类 输出类型:耳机，2-通道（立体声） 在某负载时最大输出功率 x 通道数量:35mW x 2 @ 16 欧姆 电源电压:1.62 V ~ 1.98 V 特点:I²C，麦克风，静音，短路保护，音量控制 安装类型:表面贴装 供应商设备封装:25-WLP（2.09x2.09） 封装/外壳:25-WFBGA，WLCSP 包装:带卷 (TR) |
| LM4851 | 制造商:NSC 制造商全称:National Semiconductor 功能描述:Integrated Audio Amplifier System |
| LM48510 | 制造商:NSC 制造商全称:National Semiconductor 功能描述:Boosted Class D Audio Power Amplifier |
| LM48510_0710 | 制造商:NSC 制造商全称:National Semiconductor 功能描述:Boosted Class D Audio Power Amplifier |
| LM48510SD | 功能描述:音频放大器 RoHS:否 制造商:STMicroelectronics 产品:General Purpose Audio Amplifiers 输出类型:Digital 输出功率: THD + 噪声: 工作电源电压:3.3 V 电源电流: 最大功率耗散: 最大工作温度: 安装风格:SMD/SMT 封装 / 箱体:TQFP-64 封装:Reel |
发布紧急采购，3分钟左右您将得到回复。