- 您现在的位置：买卖IC网 > PDF目录224108 > LM5009SDX (NATIONAL SEMICONDUCTOR CORP) 150 mA, 100V Step-Down Switching Regulator PDF资料下载
参数资料
| 型号： | LM5009SDX |
| 厂商： | NATIONAL SEMICONDUCTOR CORP |
| 元件分类： | 稳压器 |
| 英文描述： | 150 mA, 100V Step-Down Switching Regulator |
| 中文描述： | 0.37 A SWITCHING REGULATOR, DSO8 |
| 封装： | 4 X 4 MM, EXPOSED PAD, LLP-8 |
| 文件页数： | 3/14页 |
| 文件大小： | 647K |
| 代理商： | LM5009SDX |
Applications Information (Continued)
supplies the surge current to charge the buck switch gate at
turn-on. A low ESR also ensures a quick recharge during
each off-time. At minimum VIN, when the on-time is at maxi-
mum, it is possible during start-up that C4 will not fully
recharge during each 300 ns off-time. The circuit will not be
able to complete the start-up, and achieve output regulation.
This can occur when the frequency is intended to be low
(e.g., R
ON = 500K). In this case C4 should be increased so
it can maintain sufficient voltage across the buck switch
driver during each on-time.
C5: This capacitor helps avoid supply voltage transients and
ringing due to long lead inductance at VIN. A low ESR, 0.1F
ceramic chip capacitor is recommended, located close to the
LM5009.
FINAL CIRCUIT
The final circuit is shown in Figure 5. The circuit was tested,
and the resulting performance is shown in Figure 6 through
Figure 9. For these graphs, the load current was varied from
50mA to 200mA.
PC BOARD LAYOUT
The LM5009 regulation and over-voltage comparators are
very fast, and as such will respond to short duration noise
pulses. Layout considerations are therefore critical for opti-
mum performance. The components at pins 1, 2, 3, 5, and 6
should be as physically close as possible to the IC, thereby
minimizing noise pickup in the PC tracks. The current loop
formed by D1, L1, and C2 should be as small as possible.
The ground connection from C2 to C1 should be as short
and direct as possible.
If the internal dissipation of the LM5009 produces excessive
junction temperatures during normal operation, good use of
the pc board’s ground plane can help considerably to dissi-
pate heat. The exposed pad on the bottom of the LLP-8
package can be soldered to a ground plane on the PC board,
and that plane should extend out from beneath the IC to help
dissipate the heat. Additionally, the use of wide PC board
traces, where possible, can also help conduct heat away
from the IC. Judicious positioning of the PC board within the
end product, along with use of any available air flow (forced
or natural convection) can help reduce the junction
temperatures.
20165822
FIGURE 5. LM5009 Example Circuit
LM5009
www.national.com
11
相关PDF资料 |
PDF描述 |
|---|---|
| LMK02000 | Precision Clock Conditioner with Integrated PLL |
| LMR-01-Z | SPECIAL SWITCH-JOYSTICK SWITCH, SPDT, MOMENTARY, 1A, 14VDC, PANEL MOUNT |
| LMR-011 | SPECIAL SWITCH-JOYSTICK SWITCH, SPDT, MOMENTARY, 1A, 14VDC, PANEL MOUNT |
| LMR-012 | SPECIAL SWITCH-JOYSTICK SWITCH, SPDT, MOMENTARY, 1A, 14VDC, PANEL MOUNT |
| LMS202CMW | 5V Single Supply TIA/EIA-232 Dual Transceivers |
相关代理商/技术参数 |
参数描述 |
|---|---|
| LM5009SDX/NOPB | 功能描述:IC REG BUCK ADJ 0.15A 8LLP RoHS:是 类别:集成电路 (IC) >> PMIC - 稳压器 - DC DC 开关稳压器 系列:PowerWise® 产品培训模块:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 标准包装:1 系列:- 类型:降压（降压） 输出类型:固定 输出数:1 输出电压:3.3V 输入电压:4.5 V ~ 24 V PWM 型:- 频率 - 开关:- 电流 - 输出:125mA 同步整流器:无 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:SOT-23-6 包装:Digi-Reel® 供应商设备封装:SOT-6 其它名称:MAX1836EUT33#TG16DKR |
| LM500-AN-2K | 功能描述:基本/快动开关 Enclosed BasicSwitch RoHS:否 制造商:Omron Electronics 触点形式:SPDT 执行器:Lever 电流额定值:5 A 电压额定值 AC:250 V 电压额定值 DC:30 V 功率额定值: 工作力:120 g IP 等级:IP 67 NEMA 额定值: 端接类型:Wire 安装:Panel |
| LM500SD-6/NOPB | 制造商:Texas Instruments 功能描述: |
| LM500Z | 制造商:SEOUL 制造商全称:Seoul Semiconductor 功能描述:GREEN OVAL LAMP LED |
| LM501 | 制造商:SEOUL 制造商全称:Seoul Semiconductor 功能描述:CYAN LAMP LED |
发布紧急采购，3分钟左右您将得到回复。