参数资料
型号: LOS4301-2K
厂商: POWER-ONE INC
元件分类: 电源模块
英文描述: 1-OUTPUT 15 W AC-DC REG PWR SUPPLY MODULE
封装: ROHS COMPLIANT
文件页数: 8/12页
文件大小: 210K
代理商: LOS4301-2K
SEP 09, 2005 revised to JUL 17, 2006
Page 5 of 12
www.power-one.com
LOS, LOR, LOK4000 Series Data Sheet
DIN-Rail Mountable AC-DC (DC-DC) Converters
Thermal Considerations
If an AC-DC converter is located in free, quasi-stationary air
(convection cooling) at the indicated maximum ambient
temperature TA max (see table: Temperature specifications) and
is operated at its nominal input voltage and output power, the
temperature measured at the Measuring point of case
temperature TC (see Mechanical Data) will approach the
indicated value TC max after the warm-up phase. However, the
relationship between TA and TC depends heavily on the
conditions of operation and integration into a system. The
thermal conditions are influenced by input voltage, output
current, airflow, temperature of surrounding components and
surfaces. TA max is therefore, contrary to TC max, an indicative
value only.
The relation between the maximum allowed output power
Po allowed and the temperature TA of the surrounding air is given
in the figure below. The rates apply if the AC-DC converter is
located in free, quasi-stationary air (convection cooling).
Note: Sufficient forced cooling allows TA to be higher than the
value given in the table if TC max according to the table is not
exceeded.
Caution: The installer must ensure that under all operating
conditions TC remains within the limits that are stated in the table
Temperature specifications.
Fig. 3
Maximum allowed output power versus input voltage at
TA 50°C. for LOK models.
50
75
150
125
100
175 200
300
0.5
1.0
Po allowed/Po nom
0
Vi
VAC
0.85
05154a
275
225 250
Fig. 4
Maximum allowed output power versus ambient temperature
at Vi >105 VAC for LOK models.
–10
0
30
20
10
40
50
70
0.5
1.0
Po allowed/Po nom
0
TA
°C
0.45
05155a
60
Output Power at Low Input Voltage
The output power of LOK models must be derated at low input
voltage, see figure below.
Output Protection
Battery charger versions LOK4140-, 4240-, LOK4740-2RLD,
and the LOK4001-2RLD have a rectangular current limitation
characteristic, which limits the output current to within 100 and
150% of Io nom. The other models are protected against
overload by a current limiting circuit, which shuts down the
converter in overload condition. It automatically restarts after
removal of the overload condition (hiccup mode).
All models are short-circuit and no-load proof.
Outputs Connected in Series
Two or more converters supplying the same or different output
voltages may be connected in series. The value of the
maximum output current to be taken is defined by that unit
providing the lowest current limiting value. It should be assured
that the outputs do not feed backwards into each other caused
by their different rise/fall times at switch-on/off cycles by adding
reverse polarity diodes across each output.
Parallel Operation
Only possible with battery charger versions.
The outputs of several battery charger models with equal
output
voltage
(e.g.
several
LOK4240-2RLD)
may
be
connected in parallel.
相关PDF资料
PDF描述
LSM-2/16-D12 1-OUTPUT DC-DC REG PWR SUPPLY MODULE
LM1001-7EPD0AFU 1-OUTPUT AC-DC REG PWR SUPPLY MODULE
LM1001-9RV0AFU 1-OUTPUT AC-DC REG PWR SUPPLY MODULE
LM1301-7PD9AFU 1-OUTPUT AC-DC REG PWR SUPPLY MODULE
LM1501-9PD1AFU 1-OUTPUT AC-DC REG PWR SUPPLY MODULE
相关代理商/技术参数
参数描述
LOS4301-2RLD 制造商:POWER-ONE 制造商全称:Power-One 功能描述:DIN-Rail Mountable AC-DC (DC-DC) Converters
LOS4601-2 制造商:Power-One 功能描述:AC/DC PS SGL-OUT 24V 0.65A 15W - Bulk
LOS4601-2RLD 制造商:POWER-ONE 制造商全称:Power-One 功能描述:DIN-Rail Mountable AC-DC (DC-DC) Converters
LOS4740-2RLD 制造商:POWER-ONE 制造商全称:Power-One 功能描述:DIN-Rail Mountable AC-DC (DC-DC) Converters
LOS4801-2RLD 制造商:POWER-ONE 制造商全称:Power-One 功能描述:DIN-Rail Mountable AC-DC (DC-DC) Converters