- 您现在的位置：买卖IC网 > PDF目录18732 > LP0603A2140ANTR\500 (AVX Corporation)LOW PASS FILTER 2140MHZ 0603 SMD PDF资料下载
参数资料
| 型号： | LP0603A2140ANTR\500 |
| 厂商： | AVX Corporation |
| 文件页数： | 5/5页 |
| 文件大小： | 0K |
| 描述： | LOW PASS FILTER 2140MHZ 0603 SMD |
| 标准包装： | 500 |
| 系列： | LP0603 |
| 频率： | 2.14GHz 中心 |
| 带宽： | 60MHz |
| 滤波器类型： | 低通 |
| 插入损耗： | 0.3dB |
| 封装/外壳： | 0603（1608 公制），4 PC 板 |
| 安装类型： | 表面贴装 |
| 包装： | 带卷 (TR) |
| 高度（最大）： | 0.028"（0.70mm） |
| 尺寸/尺寸： | 0.063" L x 0.033" W（1.60mm x 0.84mm） |
Thin-Film Low Pass Filter
LP0603 Lead-Free LGA Type Test Jig
TEST JIG FOR LP0603 LEAD-FREE LGA LOW PASS FILTER
GENERAL DESCRIPTION
These jigs are designed for testing the LP0603 LGA Low
Pass Filters using a Vector Network Analyzer.
They consist of a dielectric substrate, having 50 Ω microstrips
as conducting lines and a bottom ground plane located at a
MEASUREMENT PROCEDURE
Follow the VNA’s instruction manual and use the calibration
jig to perform a full 2-Port calibration in the required band-
widths.
Solder the filter to the measurement jig as follows:
distance of 0.127mm from the microstrips.
The substrate used is Neltec’s NH9338ST0127C1BC (or
similar).
The connectors are SMA type (female), ‘Johnson
Components Inc.’ Product P/N: 142-0701-841 (or similar).
Input
(Filter)
Output
(Filter)
2 Connector 1 (Jig) GND (Filter) 2 GND (Jig)
2 Connector 2 (Jig) GND (Filter) 2 GND (Jig)
Both a measurement jig and a calibration jig are provided.
The calibration jig is designed for a full 2-port calibration, and
consists of an open line, short line and through line. LOAD
calibration can be done by a 50 Ω SMA termination.
Measurement
Set the VNA to the relevant frequency band. Connect the
VNA using a 10dB attenuator on the jig terminal connected
to port 2 (using an RF cable).
Calibration Jig
Short line to
Open
Connector 1
Connector 2
GND
Load &
Through
line
Load &
OUT
Connector
Johnson
P/N 152-0701-841
109
4
相关PDF资料 |
PDF描述 |
|---|---|
| LP0603A2140ALTR | LOW PASS FILTER 2140MHZ 0603 SMD |
| LP0603A1950ANTR\500 | LOW PASS FILTER 1950MHZ 0603 SMD |
| A251 | ADAPTER AC CLAMP ON FOR DMM |
| LP0603A1950ALTR | LOW PASS FILTER 1950MHZ 0603 SMD |
| MTMMC-G-F4.R1-SP | MODEM MMC QUAD-BAND GPRS 5V |
相关代理商/技术参数 |
参数描述 |
|---|---|
| LP0603A2442ANTR | 功能描述:信号调节 2442MHz 0603 SIZE RoHS:否 制造商:EPCOS 产品:Duplexers 频率:782 MHz, 751 MHz 频率范围: 电压额定值: 带宽: 阻抗:50 Ohms 端接类型:SMD/SMT 封装 / 箱体:2.5 mm x 2 mm 工作温度范围:- 30 C to + 85 C 封装:Reel |
| LP0603A2442ANTR\\500 | 制造商:AVX Corporation 功能描述:LOW PASS FILTER - Tape and Reel 制造商:AVX Corporation 功能描述:LOW PASS FILTER 2442MHZ 0603 SMD |
| LP0603A2442ANTR\500 | 功能描述:信号调节 2442MHz 0603 SIZE RoHS:否 制造商:EPCOS 产品:Duplexers 频率:782 MHz, 751 MHz 频率范围: 电压额定值: 带宽: 阻抗:50 Ohms 端接类型:SMD/SMT 封装 / 箱体:2.5 mm x 2 mm 工作温度范围:- 30 C to + 85 C 封装:Reel |
| LP0603A3500ANTR | 制造商:AVX Corporation 功能描述:THIN FILM LOW PASS FILTER LGA TERM SMD 0603 -40/+85?C - Tape and Reel |
| LP0603N2442ANTR | 功能描述:信号调节 2442MHz 0603 SIZE RoHS:否 制造商:EPCOS 产品:Duplexers 频率:782 MHz, 751 MHz 频率范围: 电压额定值: 带宽: 阻抗:50 Ohms 端接类型:SMD/SMT 封装 / 箱体:2.5 mm x 2 mm 工作温度范围:- 30 C to + 85 C 封装:Reel |
发布紧急采购，3分钟左右您将得到回复。