- 您现在的位置：买卖IC网 > PDF目录239826 > LP0603A2140ANTR (AVX CORP) FILTER LOW PASS 2140MHZ 0603 SMD PDF资料下载
参数资料
| 型号： | LP0603A2140ANTR |
| 厂商： | AVX CORP |
| 英文描述： | FILTER LOW PASS 2140MHZ 0603 SMD |
| 中文描述： | 2140 MHz, LOW PASS FILTER |
| 封装： | ROHS COMPLIANT, MINIATURE, EIA STD PACKAGE SIZE 0603, LGA-4 |
| 文件页数： | 5/5页 |
| 文件大小： | 124K |
| 代理商： | LP0603A2140ANTR |
85
4
GENERAL DESCRIPTION
These jigs are designed for testing the LP0603 LGA Low
Pass Filters using a Vector Network Analyzer.
They consist of a dielectric substrate, having 50
Ω microstrips
as conducting lines and a bottom ground plane located at a
distance of 0.127mm from the microstrips.
The substrate used is Neltec’s NH9338ST0127C1BC (or
similar).
The
connectors
are
SMA
type
(female),
‘Johnson
Components Inc.’ Product P/N: 142-0701-841 (or similar).
Both a measurement jig and a calibration jig are provided.
The calibration jig is designed for a full 2-port calibration, and
consists of an open line, short line and through line. LOAD
calibration can be done by a 50
Ω SMA termination.
MEASUREMENT PROCEDURE
Follow the VNA’s instruction manual and use the calibration
jig to perform a full 2-Port calibration in the required band-
widths.
Solder the filter to the measurement jig as follows:
Input
Connector 1 (Jig)
GND (Filter)
GND (Jig)
(Filter)
Output Connector 2 (Jig)
GND (Filter)
GND (Jig)
(Filter)
Set the VNA to the relevant frequency band. Connect the
VNA using a 10dB attenuator on the jig terminal connected
to port 2 (using an RF cable).
TEST JIG FOR LP0603 LEAD-FREE LGA LOW PASS FILTER
Thin-Film Low Pass Filter
LP0603 Lead-Free LGA Type Test Jig
Connector 1
Connector 2
Load &
Through
Short line to
GND
Connector
Johnson
P/N 152-0701-841
Open
line
Load &
OUT
Measurement
Calibration Jig
相关PDF资料 |
PDF描述 |
|---|---|
| LP0603A2442ANTR | FILTER LOW PASS 2442MHZ 0603 SMD |
| LP0805A0836AWTR | FILTER LOW-PASS 836MHZ SMD-0805 SN/PB TR-7-PL |
| LP0805A0897AWTR | FILTER LOW-PASS 897MHZ SMD-0805 SN/PB TR-7-PL |
| LP0805A0947AWTR | FILTER LOW-PASS 947MHZ SMD-0805 SN/PB TR-7-PL |
| LP0805A1842AWTR | FILTER LOW-PASS 1842MHZ SMD-0805 SN/PB TR-7-PL |
相关代理商/技术参数 |
参数描述 |
|---|---|
| LP0603A2140ANTR\\500 | 制造商:AVX Corporation 功能描述:EM FLTR 50OHM - Tape and Reel 制造商:AVX Corporation 功能描述:LOW PASS FILTER 2140MHZ 0603 SMD |
| LP0603A2140ANTR\500 | 功能描述:信号调节 2140MHz 0603 SIZE RoHS:否 制造商:EPCOS 产品:Duplexers 频率:782 MHz, 751 MHz 频率范围: 电压额定值: 带宽: 阻抗:50 Ohms 端接类型:SMD/SMT 封装 / 箱体:2.5 mm x 2 mm 工作温度范围:- 30 C to + 85 C 封装:Reel |
| LP0603A2442ANTR | 功能描述:信号调节 2442MHz 0603 SIZE RoHS:否 制造商:EPCOS 产品:Duplexers 频率:782 MHz, 751 MHz 频率范围: 电压额定值: 带宽: 阻抗:50 Ohms 端接类型:SMD/SMT 封装 / 箱体:2.5 mm x 2 mm 工作温度范围:- 30 C to + 85 C 封装:Reel |
| LP0603A2442ANTR\\500 | 制造商:AVX Corporation 功能描述:LOW PASS FILTER - Tape and Reel 制造商:AVX Corporation 功能描述:LOW PASS FILTER 2442MHZ 0603 SMD |
| LP0603A2442ANTR\500 | 功能描述:信号调节 2442MHz 0603 SIZE RoHS:否 制造商:EPCOS 产品:Duplexers 频率:782 MHz, 751 MHz 频率范围: 电压额定值: 带宽: 阻抗:50 Ohms 端接类型:SMD/SMT 封装 / 箱体:2.5 mm x 2 mm 工作温度范围:- 30 C to + 85 C 封装:Reel |
发布紧急采购，3分钟左右您将得到回复。