参数资料
型号: LP0603A2442ANTR
厂商: AVX Corporation
文件页数: 5/5页
文件大小: 0K
描述: FILTER LOW PASS 2442MHZ 0603 SMD
产品目录绘图: LP0603 Series
LP0603 Series Footprint
LP0603 Series Circuit
标准包装: 1
系列: LP0603
频率: 2.442GHz 中心
带宽: 60MHz
滤波器类型: 低通
插入损耗: 0.3dB
封装/外壳: 0603(1608 公制),4 PC 板
安装类型: 表面贴装
包装: 标准包装
高度(最大): 0.028"(0.70mm)
尺寸/尺寸: 0.063" L x 0.033" W(1.60mm x 0.84mm)
产品目录页面: 557 (CN2011-ZH PDF)
其它名称: 478-2915-6
Thin-Film Low Pass Filter
LP0603 Lead-Free LGA Type Test Jig
TEST JIG FOR LP0603 LEAD-FREE LGA LOW PASS FILTER
GENERAL DESCRIPTION
These jigs are designed for testing the LP0603 LGA Low
Pass Filters using a Vector Network Analyzer.
They consist of a dielectric substrate, having 50 Ω microstrips
as conducting lines and a bottom ground plane located at a
MEASUREMENT PROCEDURE
Follow the VNA’s instruction manual and use the calibration
jig to perform a full 2-Port calibration in the required band-
widths.
Solder the filter to the measurement jig as follows:
distance of 0.127mm from the microstrips.
The substrate used is Neltec’s NH9338ST0127C1BC (or
similar).
The connectors are SMA type (female), ‘Johnson
Components Inc.’ Product P/N: 142-0701-841 (or similar).
Input
(Filter)
Output
(Filter)
2 Connector 1 (Jig) GND (Filter) 2 GND (Jig)
2 Connector 2 (Jig) GND (Filter) 2 GND (Jig)
Both a measurement jig and a calibration jig are provided.
The calibration jig is designed for a full 2-port calibration, and
consists of an open line, short line and through line. LOAD
calibration can be done by a 50 Ω SMA termination.
Measurement
Set the VNA to the relevant frequency band. Connect the
VNA using a 10dB attenuator on the jig terminal connected
to port 2 (using an RF cable).
Calibration Jig
Short line to
Open
Connector 1
Connector 2
GND
Load &
Through
line
Load &
OUT
Connector
Johnson
P/N 152-0701-841
109
4
相关PDF资料
PDF描述
14A-20-16 XFRMR PWR 115/230V 8.0V 2.5A
LP-230-50 XFRMR PWR 115V\230V 230VCT 12VA
AT86RF212-ZU IC TXRX ZIGBE/802.15.4/ISM 32QFN
LP-88-130 XFRMR 115/230V 44V 260MA PCB
LP0603A2140ANTR FILTER LOW PASS 2140MHZ 0603 SMD
相关代理商/技术参数
参数描述
LP0603A2442ANTR\\500 制造商:AVX Corporation 功能描述:LOW PASS FILTER - Tape and Reel 制造商:AVX Corporation 功能描述:LOW PASS FILTER 2442MHZ 0603 SMD
LP0603A2442ANTR\500 功能描述:信号调节 2442MHz 0603 SIZE RoHS:否 制造商:EPCOS 产品:Duplexers 频率:782 MHz, 751 MHz 频率范围: 电压额定值: 带宽: 阻抗:50 Ohms 端接类型:SMD/SMT 封装 / 箱体:2.5 mm x 2 mm 工作温度范围:- 30 C to + 85 C 封装:Reel
LP0603A3500ANTR 制造商:AVX Corporation 功能描述:THIN FILM LOW PASS FILTER LGA TERM SMD 0603 -40/+85?C - Tape and Reel
LP0603N2442ANTR 功能描述:信号调节 2442MHz 0603 SIZE RoHS:否 制造商:EPCOS 产品:Duplexers 频率:782 MHz, 751 MHz 频率范围: 电压额定值: 带宽: 阻抗:50 Ohms 端接类型:SMD/SMT 封装 / 箱体:2.5 mm x 2 mm 工作温度范围:- 30 C to + 85 C 封装:Reel
LP0603N2650ANTR 功能描述:信号调节 LOW PASS FILTER SMD 2650MHz RoHS:否 制造商:EPCOS 产品:Duplexers 频率:782 MHz, 751 MHz 频率范围: 电压额定值: 带宽: 阻抗:50 Ohms 端接类型:SMD/SMT 封装 / 箱体:2.5 mm x 2 mm 工作温度范围:- 30 C to + 85 C 封装:Reel