- 您现在的位置：买卖IC网 > PDF目录18732 > LP0805A0897AWTR (AVX Corporation)LOW PASS FILTER 897MHZ 0805 SMD PDF资料下载
参数资料
| 型号： | LP0805A0897AWTR |
| 厂商： | AVX Corporation |
| 文件页数： | 3/3页 |
| 文件大小： | 0K |
| 描述： | LOW PASS FILTER 897MHZ 0805 SMD |
| 标准包装： | 3,000 |
| 系列： | LP0805 |
| 频率： | 897.5MHz 中心 |
| 带宽： | 35MHz |
| 滤波器类型： | 低通 |
| 插入损耗： | 0.3dB |
| 封装/外壳： | 0805（2012 公制），4 PC 板 |
| 安装类型： | 表面贴装 |
| 包装： | 带卷 (TR) |
| 高度（最大）： | 0.044"（1.12mm） |
| 尺寸/尺寸： | 0.080" L x 0.061" W（2.03mm x 1.55mm） |
Thin-Film Low Pass Filter
LP0805 Test Jig
ITF TEST JIG FOR LOW PASS FILTER 0805
GENERAL DESCRIPTION
These jigs are designed for testing the LPF0805 Low Pass
Filters using a Vector Network Analyzer.
They consist of a dielectric substrate, having 50W microstrips
as conducting lines and a bottom ground plane located at a
MEASUREMENT PROCEDURE
Follow the VNA’s instruction manual and use the calibration
jig to perform a full 2-Port calibration in the required band-
widths.
Solder the filter to the measurement jig as follows:
distance of 0.254 mm from the microstrips.
The substrate used is RF-35-0100-C1B107 (or similar).
The connectors are SMA type (female), ‘Johnson
Components Inc.’ Product P/N: 142-0701-841(or similar).
Both a measurement jig and a calibration jig are provided.
Input
(Filter)
Output
(Filter)
2 Connector 1 (Jig) GND (Filter) 2 GND (Jig)
2 Connector 2 (Jig) GND (Filter) 2 GND (Jig)
The calibration jig is designed for a full 2-port calibration, and
consists of an open line, short line and through line. LOAD
calibration can be done by a 50W SMA termination.
Measurement
Set the VNA to the relevant frequency band. Connect the
VNA using a 10dB attenuator on the jig terminal connected
to port 2 (using an RF cable).
Calibration Jig
Short line to
Open
4
Connector 1
Connector 2
112
GND
Load
Through
line
Load
Through
Connector
Johnson
P/N 142-0701-841
相关PDF资料 |
PDF描述 |
|---|---|
| SD25-1950R9UBQ1 | DUPLEXER SAW 1950MHZ SMD |
| MTSMC-G-F4-IP-ED-SP | MODEM QUAD-BAND GPRS 900/1800MHZ |
| LP0805A0836ASTR | LOW PASS FILTER 836MHZ 0805 SMD |
| SF14-1575M5UB06 | FILTER SAW 1.57542GHZ SMD |
| LP0603A2140ANTR\500 | LOW PASS FILTER 2140MHZ 0603 SMD |
相关代理商/技术参数 |
参数描述 |
|---|---|
| LP0805A0902ASTR | 功能描述:信号调节 902MHz 0805 SIZE RoHS:否 制造商:EPCOS 产品:Duplexers 频率:782 MHz, 751 MHz 频率范围: 电压额定值: 带宽: 阻抗:50 Ohms 端接类型:SMD/SMT 封装 / 箱体:2.5 mm x 2 mm 工作温度范围:- 30 C to + 85 C 封装:Reel |
| LP0805A0902AWTR | 功能描述:信号调节 902MHz 0805 SIZE RoHS:否 制造商:EPCOS 产品:Duplexers 频率:782 MHz, 751 MHz 频率范围: 电压额定值: 带宽: 阻抗:50 Ohms 端接类型:SMD/SMT 封装 / 箱体:2.5 mm x 2 mm 工作温度范围:- 30 C to + 85 C 封装:Reel |
| LP0805A0942AWTR | 功能描述:信号调节 942MHz 0805 SIZE RoHS:否 制造商:EPCOS 产品:Duplexers 频率:782 MHz, 751 MHz 频率范围: 电压额定值: 带宽: 阻抗:50 Ohms 端接类型:SMD/SMT 封装 / 箱体:2.5 mm x 2 mm 工作温度范围:- 30 C to + 85 C 封装:Reel |
| LP0805A0947ASTR | 功能描述:信号调节 0805 947MHZ RoHS:否 制造商:EPCOS 产品:Duplexers 频率:782 MHz, 751 MHz 频率范围: 电压额定值: 带宽: 阻抗:50 Ohms 端接类型:SMD/SMT 封装 / 箱体:2.5 mm x 2 mm 工作温度范围:- 30 C to + 85 C 封装:Reel |
| LP0805A0947AW | 功能描述:LOW PASS FILTER 947MHZ 0805 SMD RoHS:是 类别:滤波器 >> RF，特定 系列:LP0805 标准包装:3,000 系列:LP0805 频率:947.5MHz 中心 带宽:25MHz 滤波器类型:低通 纹波:- 插入损耗:0.3dB 封装/外壳:0805（2012 公制），4 PC 板 安装类型:表面贴装 包装:带卷 (TR) 高度（最大）:0.044"（1.12mm） 尺寸/尺寸:0.080" L x 0.061" W（2.03mm x 1.55mm） |
发布紧急采购，3分钟左右您将得到回复。