- 您现在的位置：买卖IC网 > PDF目录39274 > LP0805A1842ASTR (AVX CORP) 1842.5 MHz, LOW PASS FILTER PDF资料下载
参数资料
| 型号： | LP0805A1842ASTR |
| 厂商： | AVX CORP |
| 英文描述： | 1842.5 MHz, LOW PASS FILTER |
| 封装： | ROHS COMPLIANT, MINIATURE, EIA STD PACKAGE SIZE 0805, SMD, 4 PIN |
| 文件页数： | 3/3页 |
| 文件大小： | 126K |
| 代理商： | LP0805A1842ASTR |
88
4
Thin-Film Low Pass Filter
LP0805 Test Jig
GENERAL DESCRIPTION
These jigs are designed for testing the LPF0805 Low Pass
Filters using a Vector Network Analyzer.
They consist of a dielectric substrate, having 50W microstrips
as conducting lines and a bottom ground plane located at a
distance of 0.254 mm from the microstrips.
The substrate used is RF-35-0100-C1B107 (or similar).
The
connectors
are
SMA
type
(female),
‘Johnson
Components Inc.’ Product P/N: 142-0701-841(or similar).
Both a measurement jig and a calibration jig are provided.
The calibration jig is designed for a full 2-port calibration, and
consists of an open line, short line and through line. LOAD
calibration can be done by a 50W SMA termination.
MEASUREMENT PROCEDURE
Follow the VNA’s instruction manual and use the calibration
jig to perform a full 2-Port calibration in the required band-
widths.
Solder the filter to the measurement jig as follows:
Input
Connector 1 (Jig)
GND (Filter)
GND (Jig)
(Filter)
Output Connector 2 (Jig)
GND (Filter)
GND (Jig)
(Filter)
Set the VNA to the relevant frequency band. Connect the
VNA using a 10dB attenuator on the jig terminal connected
to port 2 (using an RF cable).
ITF TEST JIG FOR LOW PASS FILTER 0805
Connector 1
Connector 2
Load
Through
Load
Through
Short line to
GND
Connector
Johnson
P/N 142-0701-841
Open
line
Measurement
Calibration Jig
相关PDF资料 |
PDF描述 |
|---|---|
| LP0805A1880ASTR | 1880 MHz, LOW PASS FILTER |
| LP0805A1890ASTR | 1890 MHz, LOW PASS FILTER |
| LP0805A1907ASTR | 1907.5 MHz, LOW PASS FILTER |
| LP0805A1960ASTR | 1960 MHz, LOW PASS FILTER |
| LP0805A2442ASTR | 2442 MHz, LOW PASS FILTER |
相关代理商/技术参数 |
参数描述 |
|---|---|
| LP0805A1842AWTR | 功能描述:信号调节 1805MHZ RoHS:否 制造商:EPCOS 产品:Duplexers 频率:782 MHz, 751 MHz 频率范围: 电压额定值: 带宽: 阻抗:50 Ohms 端接类型:SMD/SMT 封装 / 箱体:2.5 mm x 2 mm 工作温度范围:- 30 C to + 85 C 封装:Reel |
| LP0805A1880ASTR | 功能描述:信号调节 LOW PASS FILTER SMD 1880MHz HARMONIC RoHS:否 制造商:EPCOS 产品:Duplexers 频率:782 MHz, 751 MHz 频率范围: 电压额定值: 带宽: 阻抗:50 Ohms 端接类型:SMD/SMT 封装 / 箱体:2.5 mm x 2 mm 工作温度范围:- 30 C to + 85 C 封装:Reel |
| LP0805A1880AWTR | 功能描述:信号调节 1880MHz 0805 SIZE RoHS:否 制造商:EPCOS 产品:Duplexers 频率:782 MHz, 751 MHz 频率范围: 电压额定值: 带宽: 阻抗:50 Ohms 端接类型:SMD/SMT 封装 / 箱体:2.5 mm x 2 mm 工作温度范围:- 30 C to + 85 C 封装:Reel |
| LP0805A1890AWTR | 功能描述:信号调节 1880-1900MHZ LO-PASS RoHS:否 制造商:EPCOS 产品:Duplexers 频率:782 MHz, 751 MHz 频率范围: 电压额定值: 带宽: 阻抗:50 Ohms 端接类型:SMD/SMT 封装 / 箱体:2.5 mm x 2 mm 工作温度范围:- 30 C to + 85 C 封装:Reel |
| LP0805A1900ASTR | 功能描述:信号调节 LOW PASS FILTER SMD 1900MHz HARMONIC RoHS:否 制造商:EPCOS 产品:Duplexers 频率:782 MHz, 751 MHz 频率范围: 电压额定值: 带宽: 阻抗:50 Ohms 端接类型:SMD/SMT 封装 / 箱体:2.5 mm x 2 mm 工作温度范围:- 30 C to + 85 C 封装:Reel |
发布紧急采购，3分钟左右您将得到回复。