- 您现在的位置：买卖IC网 > PDF目录22177 > LP2980AIM5-4.7 (National Semiconductor)IC REG LDO 4.7V 50MA SOT23-5 PDF资料下载
参数资料
| 型号： | LP2980AIM5-4.7 |
| 厂商： | National Semiconductor |
| 文件页数： | 13/24页 |
| 文件大小： | 0K |
| 描述： | IC REG LDO 4.7V 50MA SOT23-5 |
| 标准包装： | 1,000 |
| 稳压器拓扑结构： | 正，固定式 |
| 输出电压： | 4.7V |
| 输入电压： | 最高 16V |
| 电压 - 压降（标准）： | 0.12V @ 50mA |
| 稳压器数量： | 1 |
| 电流 - 输出： | 50mA |
| 电流 - 限制（最小）： | 100mA |
| 工作温度： | -40°C ~ 125°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | SC-74A，SOT-753 |
| 供应商设备封装： | SOT-23 |
| 包装： | 带卷 (TR) |
| 其它名称： | *LP2980AIM5-4.7 |
SNOS733M – APRIL 2000 – REVISED JUNE 2013
Increasing Output Current
Figure 39. 5V/400mA Regulator
The LP2980-N can be used to control higher-current regulators, by adding an external PNP pass device. With
the PNP transistors shown in Figure 39 , the output current can be as high as 400 mA, as long as the input
To ensure regulation, the minimum input voltage of this regulator is 6V. This “headroom” is the sum of the V BE of
the external transistor and the dropout voltage of the LP2980-N.
Notes:
1. Drive this input with a logic signal (see APPLICATION HINTS ). If the shutdown function is not to be used, tie
the ON/OFF pin directly to the V IN pin.
2. Recommended devices (other PNP transistors can be used if the current gain and voltage ratings are
similar).
3. Capacitor is required for regulator stability. Minimum size is shown, and may be increased without limit.
4. Increasing the output capacitance improves transient response and increases phase margin.
5. Maximum safe input voltage and load current are limited by power dissipation in the PNP pass transistor and
the maximum ambient temperature for the specific application. If a TO-92 transistor such as the MPS2907A
is used, the thermal resistance from junction-to-ambient is 180°C/W in still air.
Assuming a maximum allowable junction temperature of 150°C for the MPS2907A device, the following curves
show the maximum V IN and I L values that may be safely used for several ambient temperatures.
Copyright ? 2000–2013, Texas Instruments Incorporated
Product Folder Links: LP2980-N
13
相关PDF资料 |
PDF描述 |
|---|---|
| EMM36DRMI-S288 | CONN EDGECARD 72POS .156 EXTEND |
| IDT70T631S12DD | IC SRAM 4MBIT 12NS 144TQFP |
| RCA10DCBN | CONN EDGECARD 20POS R/A .125 SLD |
| RCA10DCBD | CONN EDGECARD 20POS R/A .125 SLD |
| IDT70T631S10DD | IC SRAM 4MBIT 10NS 144TQFP |
相关代理商/技术参数 |
参数描述 |
|---|---|
| LP2980AIM5-5.0 | 功能描述:低压差稳压器 - LDO RoHS:否 制造商:Texas Instruments 最大输入电压:36 V 输出电压:1.4 V to 20.5 V 回动电压（最大值）:307 mV 输出电流:1 A 负载调节:0.3 % 输出端数量: 输出类型:Fixed 最大工作温度:+ 125 C 安装风格:SMD/SMT 封装 / 箱体:VQFN-20 |
| LP2980AIM5-5.0 | 制造商:Texas Instruments 功能描述:V REG LDO +5.0V SMD 2980 SOT235 |
| LP2980AIM5-5.0/NOPB | 功能描述:低压差稳压器 - LDO Micropower 50 mA Ultra LDO Regulator RoHS:否 制造商:Texas Instruments 最大输入电压:36 V 输出电压:1.4 V to 20.5 V 回动电压（最大值）:307 mV 输出电流:1 A 负载调节:0.3 % 输出端数量: 输出类型:Fixed 最大工作温度:+ 125 C 安装风格:SMD/SMT 封装 / 箱体:VQFN-20 |
| LP2980AIM5X-1.8 | 制造商:Rochester Electronics LLC 功能描述:50MA 1.8V SOT UPWR ULTRA LDO - Bulk 制造商:Texas Instruments 功能描述: |
| LP2980AIM5X-1.8/NOPB | 功能描述:IC REG LDO 1.8V 50MA SOT23-5 RoHS:是 类别:集成电路 (IC) >> PMIC - 稳压器 - 线性 系列:- 标准包装:1 系列:- 稳压器拓扑结构:正，固定式 输出电压:4V 输入电压:最高 16V 电压 - 压降（标准）:0.28V @ 150mA 稳压器数量:1 电流 - 输出:150mA 电流 - 限制（最小）:- 工作温度:-40°C ~ 125°C 安装类型:表面贴装 封装/外壳:5-VFBGA 供应商设备封装:5-uSMD 包装:Digi-Reel® 其它名称:LP2985AIBP-4.0DKR |
发布紧急采购，3分钟左右您将得到回复。