- 您现在的位置：买卖IC网 > PDF目录358909 > LP2980AIM5X-4.7 (NATIONAL SEMICONDUCTOR CORP) Micropower 50 mA Ultra Low-Dropout Regulator PDF资料下载
参数资料
| 型号： | LP2980AIM5X-4.7 |
| 厂商： | NATIONAL SEMICONDUCTOR CORP |
| 元件分类： | 基准电压源/电流源 |
| 英文描述： | Micropower 50 mA Ultra Low-Dropout Regulator |
| 中文描述： | 4.7 V FIXED POSITIVE LDO REGULATOR, 0.225 V DROPOUT, PDSO5 |
| 封装： | SOT-23, 5 PIN |
| 文件页数： | 5/18页 |
| 文件大小： | 423K |
| 代理商： | LP2980AIM5X-4.7 |
Electrical Characteristics
(Continued)
Note 3:
The maximum allowable power dissipation is a function of the maximum junction temperature, T
J(MAX)
, the junction-to-ambient thermal resistance,
θ
JA
, and
the ambient temperature, T
A
. The maximum allowable power dissipation at any ambient temperature is calculated using:
The value of
θ
for the SOT-23 package is 220C/W and the micro SMD package is 320C/W. Exceeding the maximum allowable power dissipation will cause ex-
cessive die temperature, and the regulator will go into thermal shutdown.
Note 4:
If used in a dual-supply system where the regulator load is returned to a negative supply, the LP2980 output must be diode-clamped to ground.
Note 5:
The output PNP structure contains a diode between the V
IN
and V
OUT
terminals that is normally reverse-biased. Reversing the polarity from V
IN
to V
OUT
will turn on this diode (see Application Hints).
Note 6:
Limits are 100% production tested at 25C. Limits over the operating temperature range are guaranteed through correlation using Statistical Quality Control
(SQC) methods. The limits are used to calculate National’s Average Outgoing Quality Level (AOQL).
Note 7:
Dropout voltage is defined as the input to output differential at which the output voltage drops 100 mV below the value measured with a 1V differential.
Note 8:
The ON/OFF inputs must be properly driven to prevent misoperation. For details, refer to Application Hints.
Note 9:
See Typical Performance Characteristics curves.
Basic Application Circuit
DS012078-2
*
ON/OFF input must be actively terminated. Tie to V
IN
if this function is not to be used.
**
Minimum Output Capacitance is 1 μF to insure stability over full load current range. More capacitance provides superior dynamic performance and additional
stability margin (see Application Hints).
***
Do not make connections to this pin.
L
www.national.com
5
相关PDF资料 |
PDF描述 |
|---|---|
| LP2980IBP-3.3 | Micropower 50 mA Ultra Low-Dropout Regulator |
| LP2980IBPX-3.3 | Micropower 50 mA Ultra Low-Dropout Regulator |
| LP2980IBPX-5.0 | Micropower 50 mA Ultra Low-Dropout Regulator |
| LP2980IM5-3.3 | Micropower 50 mA Ultra Low-Dropout Regulator |
| LP2980IM5-1.8 | Micropower SOT, 50 mA Low-Voltage Low-Dropout Regulator For Applications With Output Voltages < 2V |
相关代理商/技术参数 |
参数描述 |
|---|---|
| LP2980AIM5X-5.0 | 功能描述:低压差稳压器 - LDO RoHS:否 制造商:Texas Instruments 最大输入电压:36 V 输出电压:1.4 V to 20.5 V 回动电压（最大值）:307 mV 输出电流:1 A 负载调节:0.3 % 输出端数量: 输出类型:Fixed 最大工作温度:+ 125 C 安装风格:SMD/SMT 封装 / 箱体:VQFN-20 |
| LP2980AIM5X-5.0/NOPB | 功能描述:低压差稳压器 - LDO RoHS:否 制造商:Texas Instruments 最大输入电压:36 V 输出电压:1.4 V to 20.5 V 回动电压（最大值）:307 mV 输出电流:1 A 负载调节:0.3 % 输出端数量: 输出类型:Fixed 最大工作温度:+ 125 C 安装风格:SMD/SMT 封装 / 箱体:VQFN-20 |
| LP2980AITP-157 | 制造商:Rochester Electronics LLC 功能描述:- Bulk 制造商:Texas Instruments 功能描述: |
| LP2980AITP-3.3 | 制造商:Rochester Electronics LLC 功能描述:- Bulk |
| LP2980AITP-3.3/NOPB | 功能描述:IC REG LDO 3.3V 50MA 5USMD RoHS:是 类别:集成电路 (IC) >> PMIC - 稳压器 - 线性 系列:- 产品培训模块:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 标准包装:2,500 系列:- 稳压器拓扑结构:正，固定式 输出电压:3.1V 输入电压:最高 5.5V 电压 - 压降（标准）:- 稳压器数量:1 电流 - 输出:300mA 电流 - 限制（最小）:420mA 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:SOT-23-5 细型，TSOT-23-5 供应商设备封装:TSOT-23-5 包装:带卷 (TR) |
发布紧急采购，3分钟左右您将得到回复。