- 您现在的位置：买卖IC网 > PDF目录358909 > LP2980IM5X-3.0 (NATIONAL SEMICONDUCTOR CORP) Micropower 50 mA Ultra Low-Dropout Regulator PDF资料下载
参数资料
| 型号： | LP2980IM5X-3.0 |
| 厂商： | NATIONAL SEMICONDUCTOR CORP |
| 元件分类： | 基准电压源/电流源 |
| 英文描述： | Micropower 50 mA Ultra Low-Dropout Regulator |
| 中文描述： | 3 V FIXED POSITIVE LDO REGULATOR, 0.225 V DROPOUT, PDSO5 |
| 封装： | SOT-23, 5 PIN |
| 文件页数： | 15/18页 |
| 文件大小： | 423K |
| 代理商： | LP2980IM5X-3.0 |
Typical Applications
(Continued)
brought low, the converter will be in shutdown, and will draw
less than 1 μA from the source.
Notes:
A. Drive this input with a logic signal (see Application Hints).
If the shutdown function is not to be used, tie the ON/OFF
pin directly to the V
IN
pin.
B. Capacitor is required for regulator stability. Minimum size
is shown, and may be increased without limit.
C. Increasing the output capacitance improves transient re-
sponse and increases phase margin.
D. A heatsink may be required for this transistor. The maxi-
mum allowable value for thermal resistance of the heatsink
is dependent on ambient temperature and load current (see
curves in ). Once the value is obtained from the graph, a
heatsink must be selected which has a thermal resistance
equal to or lower than this value. If the value is above
60C/W, no heatsink is required (the TO-220 package alone
will safely dissipate this).
For these curves, a maximum junction temperature of 150C
is assumed for the pass transistor. The case-to-heatsink at-
tachment thermal resistance is assumed to be 1.5C/W. All
calculations are for 5.5V input voltage (which is worst-case
for power dissipation).
DS012078-54
FIGURE 8. Heatsink Thermal Resistance Requirements
for
Figure 7
L
www.national.com
15
相关PDF资料 |
PDF描述 |
|---|---|
| LP2980AIM5-2.5 | CONNECTOR ACCESSORY |
| LP2980AIM5-4.0 | Micropower 50 mA Ultra Low-Dropout Regulator |
| LP2980IM5-4.0 | Micropower 50 mA Ultra Low-Dropout Regulator |
| LP2980AIM5-5.0 | Micropower 50 mA Ultra Low-Dropout Regulator |
| LP2980IM5-5.0 | Micropower 50 mA Ultra Low-Dropout Regulator |
相关代理商/技术参数 |
参数描述 |
|---|---|
| LP2980IM5X-4.5 | 制造商:Rochester Electronics LLC 功能描述:50MA MICROPWR SOT-23 ULTRA LDO - Bulk 制造商:Texas Instruments 功能描述: |
| LP2980IM5X-4.7 | 功能描述:低压差稳压器 - LDO RoHS:否 制造商:Texas Instruments 最大输入电压:36 V 输出电压:1.4 V to 20.5 V 回动电压（最大值）:307 mV 输出电流:1 A 负载调节:0.3 % 输出端数量: 输出类型:Fixed 最大工作温度:+ 125 C 安装风格:SMD/SMT 封装 / 箱体:VQFN-20 |
| LP2980IM5X-4.7/NOPB | 功能描述:低压差稳压器 - LDO RoHS:否 制造商:Texas Instruments 最大输入电压:36 V 输出电压:1.4 V to 20.5 V 回动电压（最大值）:307 mV 输出电流:1 A 负载调节:0.3 % 输出端数量: 输出类型:Fixed 最大工作温度:+ 125 C 安装风格:SMD/SMT 封装 / 箱体:VQFN-20 |
| LP2980IM5X-5.0 | 功能描述:低压差稳压器 - LDO RoHS:否 制造商:Texas Instruments 最大输入电压:36 V 输出电压:1.4 V to 20.5 V 回动电压（最大值）:307 mV 输出电流:1 A 负载调节:0.3 % 输出端数量: 输出类型:Fixed 最大工作温度:+ 125 C 安装风格:SMD/SMT 封装 / 箱体:VQFN-20 |
| LP2980IM5X-5.0/NOPB | 功能描述:低压差稳压器 - LDO RoHS:否 制造商:Texas Instruments 最大输入电压:36 V 输出电压:1.4 V to 20.5 V 回动电压（最大值）:307 mV 输出电流:1 A 负载调节:0.3 % 输出端数量: 输出类型:Fixed 最大工作温度:+ 125 C 安装风格:SMD/SMT 封装 / 箱体:VQFN-20 |
发布紧急采购，3分钟左右您将得到回复。