参数资料
型号: LPC2292FET144/G,55
厂商: NXP Semiconductors
文件页数: 11/54页
文件大小: 0K
描述: IC ARM7 MCU FLASH 256K 144TFBGA
标准包装: 189
系列: LPC2200
核心处理器: ARM7
芯体尺寸: 16/32-位
速度: 60MHz
连通性: CAN,EBI/EMI,I²C,Microwire,SPI,SSI,SSP,UART/USART
外围设备: POR,PWM,WDT
输入/输出数: 112
程序存储器容量: 256KB(256K x 8)
程序存储器类型: 闪存
RAM 容量: 16K x 8
电压 - 电源 (Vcc/Vdd): 1.65 V ~ 3.6 V
数据转换器: A/D 8x10b
振荡器型: 内部
工作温度: -40°C ~ 85°C
封装/外壳: 144-TFBGA
包装: 托盘
配用: OM10091-ND - KIT DEV PHYCORE-ARM7/LPC2220
568-1757-ND - BOARD EVAL FOR LPC220X ARM MCU
其它名称: 568-4186
LPC2292FET144/G
LPC2292_2294
All information provided in this document is subject to legal disclaimers.
NXP B.V. 2011. All rights reserved.
Product data sheet
Rev. 8 — 8 June 2011
19 of 54
NXP Semiconductors
LPC2292/2294
16/32-bit ARM microcontrollers with external memory interface
6.8 General purpose parallel I/O (GPIO) and Fast I/O
Device pins that are not connected to a specific peripheral function are controlled by the
parallel I/O registers. Pins may be dynamically configured as inputs or outputs. Separate
registers allow setting or clearing any number of outputs simultaneously. The value of the
output register may be read back, as well as the current state of the port pins.
6.8.1 Features
Bit-level set and clear registers allow a single instruction set or clear of any number of
bits in one port.
Direction control of individual bits.
Separate control of output set and clear.
All I/O default to inputs after reset.
6.8.2 Features added with the Fast GPIO set of registers available on
LPC2292/2294/01 only
Fast GPIO registers are relocated to the ARM local bus for the fastest possible I/O
timing, enabling port pin toggling up to 3.5 times faster than earlier LPC2000 devices.
Mask registers allow treating sets of port bits as a group, leaving other bits
unchanged.
All Fast GPIO registers are byte addressable.
Entire port value can be written in one instruction.
Ports are accessible via either the legacy group of registers (GPIOs) or the group of
registers providing accelerated port access (Fast GPIOs).
6.9 10-bit ADC
The LPC2292/2294 each contain a single 10-bit successive approximation ADC with four
multiplexed channels.
6.9.1 Features
Measurement range of 0 V to 3 V.
Capable of performing more than 400000 10-bit samples per second.
Burst conversion mode for single or multiple inputs.
Optional conversion on transition on input pin or Timer Match signal.
6.9.2 ADC features available in LPC2292/2294/01 only
Every analog input has a dedicated result register to reduce interrupt overhead.
Every analog input can generate an interrupt once the conversion is completed.
The ADC pads are 5 V tolerant when configured for digital I/O function(s).
相关PDF资料
PDF描述
VI-JWM-IY-F4 CONVERTER MOD DC/DC 10V 50W
VI-JWL-IY-F3 CONVERTER MOD DC/DC 28V 50W
VJ2225Y223KBLAT4X CAP CER 0.022UF 630V X7R 2225
VJ1808Y683JXPAT5Z CAP CER 0.068UF 250V 5% X7R 1808
VJ2225Y333KBLAT4X CAP CER 0.033UF 630V X7R 2225
相关代理商/技术参数
参数描述
LPC2294 制造商:PHILIPS 制造商全称:NXP Semiconductors 功能描述:16/32-bit ARM microcontrollers 256 kB ISP/IAP Flash with CAN, 10-bit ADC and external memory interface
LPC2294HBD144 制造商:NXP Semiconductors 功能描述:IC MCU 16/32BIT ARM7 144LQFP 制造商:NXP Semiconductors 功能描述:IC, MCU, 16/32BIT, ARM7, 144LQFP
LPC2294HBD144,551 功能描述:ARM微控制器 - MCU PREF PART LPC2294HBD144/01-S RoHS:否 制造商:STMicroelectronics 核心:ARM Cortex M4F 处理器系列:STM32F373xx 数据总线宽度:32 bit 最大时钟频率:72 MHz 程序存储器大小:256 KB 数据 RAM 大小:32 KB 片上 ADC:Yes 工作电源电压:1.65 V to 3.6 V, 2 V to 3.6 V, 2.2 V to 3.6 V 工作温度范围:- 40 C to + 85 C 封装 / 箱体:LQFP-48 安装风格:SMD/SMT
LPC2294HBD144/00 制造商:PHILIPS 制造商全称:NXP Semiconductors 功能描述:16/32-bit ARM microcontrollers; 256 kB ISP/IAP flash with CAN, 10-bit ADC and external memory interface
LPC2294HBD144/01 制造商:NXP Semiconductors 功能描述:MCU, 16BIT/32BIT, 60MHZ, LQFP-144 制造商:NXP Semiconductors 功能描述:MCU, 16BIT/32BIT, 60MHZ, LQFP-144, Controller Family/Series:LPC2200, Core Size:1 制造商:NXP Semiconductors 功能描述:MCU, 16BIT/32BIT, 60MHZ, LQFP-144, Controller Family/Series:LPC2200, Core Size:16bit / 32bit, No. of I/O's:112, Supply Voltage Min:1.65V, Supply Voltage Max:1.95V, Digital IC Case Style:LQFP, No. of Pins:144, Program Memory