- 您现在的位置：买卖IC网 > PDF目录44730 > LQN-0.8/50-D12H-C (MURATA POWER SOLUTIONS INC) DC-DC REG PWR SUPPLY MODULE PDF资料下载
参数资料
| 型号： | LQN-0.8/50-D12H-C |
| 厂商： | MURATA POWER SOLUTIONS INC |
| 元件分类： | 电源模块 |
| 英文描述： | DC-DC REG PWR SUPPLY MODULE |
| 封装： | ROHS COMPLIANT PACKAGE-10 |
| 文件页数： | 13/14页 |
| 文件大小： | 1755K |
| 代理商： | LQN-0.8/50-D12H-C |
Power derating (output current limiting) is based upon maximum output cur-
rent and voltage at the converter's output pins. Use of trim and sense functions
can cause the output voltage to increase, thereby increasing output power
beyond the converter's specified rating. Therefore:
(Vout at pins) x (Iout) ≤ rated output power
The internal 10.5
resistor between +Sense and +Output (see Figure 1)
serves to protect the sense function by limiting the output current flowing
through the sense line if the main output is disconnected. It also prevents
output voltage runaway if the sense connection is disconnected.
Note: If devices have the +Sense pin (pin 10) installed (no part-number
suffix) and the sense function is not used for remote regulation, +Sense
(pin 10) must be tied to +Output (pin 7, 9) at the DC/DC converter pins.
Output overvoltage protection is monitored at the output voltage pin, not
the Sense pin. Therefore, excessive voltage differences between Vout and
Sense in conjunction with trim adjustment of the output voltage can cause the
overvoltage protection circuitry to activate (see Performance Specifications for
overvoltage limits). Power derating is based on maximum output current and
voltage at the converter's output pins.
Temperature/power derating is based on maximum output current and volt-
age at the converter's output pins.
The Trim pin (pin 2) is a relatively high impedance node that can be suscep-
tible to noise pickup when connected to long conductors in noisy environments.
In such cases, a 0.22F capacitor to ground can be added to reduce this long
lead effect.
Typical Performance Curves
Technical enquiries email: sales@murata-ps.com, tel: +1 508 339 3000
www.murata-ps.com
MDC_LQN D12 Models.B03 Page 8 of 14
LQN D12 Models
Non-Isolated, Single Output, 12Vin, 0.8-5Vout
45-50 Amp, -Brick, DC/DC Converters
相关PDF资料 |
PDF描述 |
|---|---|
| LQN-0.8/50-D12MB-C | DC-DC REG PWR SUPPLY MODULE |
| LQN-5/45-D12H-C | DC-DC REG PWR SUPPLY MODULE |
| LQN-0.8/50-D12M-C | DC-DC REG PWR SUPPLY MODULE |
| LQN-2/50-D12M-C | DC-DC REG PWR SUPPLY MODULE |
| LQN-3.3/45-D12M-C | DC-DC REG PWR SUPPLY MODULE |
相关代理商/技术参数 |
参数描述 |
|---|---|
| LQN-1.2/50-D12B-C | 功能描述:DC/DC转换器 60W 12V to 1.2V 50A RoHS:否 制造商:Murata 产品: 输出功率: 输入电压范围:3.6 V to 5.5 V 输入电压（标称）: 输出端数量:1 输出电压（通道 1）:3.3 V 输出电流（通道 1）:600 mA 输出电压（通道 2）: 输出电流（通道 2）: 安装风格:SMD/SMT 封装 / 箱体尺寸: |
| LQN-1.2/50-D12-C | 功能描述:DC/DC转换器 60W 12V to 1.2V 50A RoHS:否 制造商:Murata 产品: 输出功率: 输入电压范围:3.6 V to 5.5 V 输入电压（标称）: 输出端数量:1 输出电压（通道 1）:3.3 V 输出电流（通道 1）:600 mA 输出电压（通道 2）: 输出电流（通道 2）: 安装风格:SMD/SMT 封装 / 箱体尺寸: |
| LQN-1.2/50-D12H-C | 功能描述:DC/DC转换器 60W 12V to 1.2V 50A HEAT SINK RoHS:否 制造商:Murata 产品: 输出功率: 输入电压范围:3.6 V to 5.5 V 输入电压（标称）: 输出端数量:1 输出电压（通道 1）:3.3 V 输出电流（通道 1）:600 mA 输出电压（通道 2）: 输出电流（通道 2）: 安装风格:SMD/SMT 封装 / 箱体尺寸: |
| LQN-1.2/50-D12MB-C | 功能描述:DC/DC转换器 60W 12V to 1.2V 50A SURFACE MOUNT RoHS:否 制造商:Murata 产品: 输出功率: 输入电压范围:3.6 V to 5.5 V 输入电压（标称）: 输出端数量:1 输出电压（通道 1）:3.3 V 输出电流（通道 1）:600 mA 输出电压（通道 2）: 输出电流（通道 2）: 安装风格:SMD/SMT 封装 / 箱体尺寸: |
| LQN-1.2/50-D12M-C | 功能描述:DC/DC转换器 60W 12V to 1.2V 50A SURFACE MOUNT RoHS:否 制造商:Murata 产品: 输出功率: 输入电压范围:3.6 V to 5.5 V 输入电压（标称）: 输出端数量:1 输出电压（通道 1）:3.3 V 输出电流（通道 1）:600 mA 输出电压（通道 2）: 输出电流（通道 2）: 安装风格:SMD/SMT 封装 / 箱体尺寸: |
发布紧急采购，3分钟左右您将得到回复。