- 您现在的位置：买卖IC网 > PDF目录79876 > LQN-1/50-D12MB 1-OUTPUT 50.75 W DC-DC REG PWR SUPPLY MODULE PDF资料下载
参数资料
| 型号： | LQN-1/50-D12MB |
| 元件分类： | 电源模块 |
| 英文描述： | 1-OUTPUT 50.75 W DC-DC REG PWR SUPPLY MODULE |
| 文件页数： | 7/9页 |
| 文件大小： | 609K |
| 代理商： | LQN-1/50-D12MB |
LQN D12 Models
N O N - I S O L A T E D , 4 5 - 5 0 A Q U A R T E R B R I C K , D C / D C C O N V E R T E R S
7
To prevent high frequency voltage differences between VOUT and Sense, we
recommend installation of a 1000pF capacitor close to the converter.
The sense function is capable of compensating for voltage drops between
the +Output and +Sense pins that do not exceed 10% of VOUT.
[VOUT(+) – Common] – [Sense(+) – Common]
≤ 10%VOUT
Power derating (output current limiting) is based upon maximum output
current and voltage at the converter's output pins. Use of trim and sense
functions can cause the output voltage to increase, thereby increasing output
power beyond the converter's specied rating. Therefore:
(VOUT at pins) x (IOUT)
≤ rated output power
The internal 10.5
resistor between +Sense and +Output (see Figure 1)
serves to protect the sense function by limiting the output current owing
through the sense line if the main output is disconnected. It also prevents
output voltage runaway if the sense connection is disconnected.
Note: If devices have the +Sense pin (pin 10) installed (no part-number
sufx) and the sense function is not used for remote regulation, +Sense
(pin 10) must be tied to +Output (pin 7, 9) at the DC/DC converter pins.
Output overvoltage protection is monitored at the output voltage pin, not the
Sense pin. Therefore, excessive voltage differences between VOUT and Sense
in conjunction with trim adjustment of the output voltage can cause the
overvoltage protection circuitry to activate (see Performance Specications
for overvoltage limits). Power derating is based on maximum output current
and voltage at the converter's output pins.
Temperature/power derating is based on maximum output current and volt-
age at the converter's output pins.
The Trim pin (pin 2) is a relatively high impedance node that can be suscep-
tible to noise pickup when connected to long conductors in noisy environ-
ments. In such cases, a 0.22F capacitor to ground can be added to reduce
this long lead effect.
相关PDF资料 |
PDF描述 |
|---|---|
| LM4040BIM7X-3.0/NOPB | 1-OUTPUT TWO TERM VOLTAGE REFERENCE, 3 V, PDSO5 |
| LM4040EIM7X-3.0/NOPB | 1-OUTPUT TWO TERM VOLTAGE REFERENCE, 3 V, PDSO5 |
| LM4040EIM3-2.0/NOPB | 1-OUTPUT TWO TERM VOLTAGE REFERENCE, 2.048 V, PDSO3 |
| LM2686MTC/NOPB | SWITCHED CAPACITOR REGULATOR, 180 kHz SWITCHING FREQ-MAX, PDSO14 |
| LT1009IPWRE4 | 1-OUTPUT TWO TERM VOLTAGE REFERENCE, 2.5 V, PDSO8 |
相关代理商/技术参数 |
参数描述 |
|---|---|
| LQN1A27NJ04M00 | 制造商:Murata Manufacturing Co Ltd 功能描述:1206, 27NH, 5%, AIRE CORE, WIREWOUND, SMT - Tape and Reel |
| LQN1A27NK04M | 制造商:Murata Manufacturing Co Ltd 功能描述: |
| LQN1A47NJ04M00 | 功能描述:固定电感器 1206 47nH 5% RoHS:否 制造商:AVX 电感:10 uH 容差:20 % 最大直流电流:1 A 最大直流电阻:0.075 Ohms 工作温度范围:- 40 C to + 85 C 自谐振频率:38 MHz Q 最小值:40 尺寸:4.45 mm W x 6.6 mm L x 2.92 mm H 屏蔽:Shielded 端接类型:SMD/SMT 封装 / 箱体:6.6 mm x 4.45 mm |
| lqn1a56nj04m00 | 制造商:Murata Manufacturing Co Ltd 功能描述:Inductor, Air Core, 56nh, 5±% |
| LQN1A8N8J04M00 | 制造商:Murata Manufacturing Co Ltd 功能描述:1 ELEMENT, 0.0088 UH, AIR-CORE, GENERAL PURPOSE INDUCTOR, SMD, 1206 |
发布紧急采购，3分钟左右您将得到回复。