- 您现在的位置：买卖IC网 > PDF目录80121 > LS1001-7RD6TB1 1-OUTPUT AC-DC REG PWR SUPPLY MODULE PDF资料下载
参数资料
| 型号： | LS1001-7RD6TB1 |
| 元件分类： | 电源模块 |
| 英文描述： | 1-OUTPUT AC-DC REG PWR SUPPLY MODULE |
| 封装： | METAL, CASE S02, MODULE |
| 文件页数： | 11/23页 |
| 文件大小： | 526K |
| 代理商： | LS1001-7RD6TB1 |
Rugged Environment
AC-DC Converters <100 W
S-Family
Edition 2/96 - Melcher AG
10 - 41
MELCHER
The Power Partners.
10.1
Option V ACFAIL signal (VME)
This option defines an undervoltage monitoring circuit for
the input or input and main output voltage (
Uo1 nom = 5.1 V
only) equivalent to option D and generates an ACFAIL sig-
nal (V signal) which conforms to the VME standard.
The low state level of the ACFAIL signal is specified at a
sink current of
IV ≤ 48 mA to UV ≤ 0.6 V (open-collector out-
put of a NPN transistor). The pull-up resistor feeding the
open-collector output should be placed on the VME back
plane.
After the ACFAIL signal has gone low, the VME standard
requires a hold-up time
th of at least 4 ms before the 5.1 V
output drops to 4.875 V when the output is fully loaded.
This hold-up time
t h is provided by the internal input capaci-
tance. Consequently the working input voltage and the
threshold level
Uti should be adequately above the mini-
mum input voltage
Ui min of the converter so that enough
energy is remaining in the input capacitance.
Formula for threshold level for desired value of
th:
2
Po (th + 0.3 ms) 100
Uti =
––––––––––––––––––––– +
Ui min2
Ci min
η
where as:
Ci min = internal input capacitance [mF]
Po
= output power [W]
η
= efficiency [%]
th
= hold-up time [ms]
Ui min = minimum input voltage [V] 1
Uti
= threshold level [V]
1 Min. input voltage according to "Electrical Input Data". For out-
put voltages
Uo > Uo nom, the minimum input voltage increases
proportionally to
Uo/Uo nom.
Remarks:
Option V2 and V3 can be adjusted by potentiometer to a
threshold level between
Ui min and Ui max.
Table 15: Available internal input capacitance and factory
potentiometer setting of Ut i with resulting hold-up time
Types
LS
Unit
Ci min
0.21
mF
Uti
120
V DC
th
6.4
ms
Option V operates independently of the built-in input under-
voltage lock-out circuit. A logic "low" signal is generated at
pin 20 as soon as one of the monitored voltages drops be-
low the preselected threshold level
Ut. The return for this
signal is Vo1–. The V output recovers when the monitored
voltage(s) exceed(s)
Ut + Uh. The threshold level Ut is either
adjustable by potentiometer, accessible through a hole in
the front cover, or is adjusted during manufacture to a de-
termined customer specified value.
Versions V0, V2 and V3 are available as shown below.
Table 16: Undervoltage monitor functions
V output
Monitoring
Minimum adjustment range
Typical hysteresis
Uh [% of Ut]
(VME compatible)
Ui
Uo1
of threshold level
for
Ut min…Ut max
Uti
Uto
Uhi
Uho
V2
yes
no
Ui min...Ui max 1–
3.4...0.4
–
V3
yes
Ui min...Ui max 1
0.95...0.985
Uo1 2
3.4...0.4
"0"
V0
yes
no
Ui min...Ui max 3 4
–
3.4...0.4
–
yes
Ui min...Ui max 3 4
0.95...0.985
Uo1 2
3.4...0.4
"0"
1 Threshold level adjustable by potentiometer.
2 Fixed value between 95% and 98.5% of Uo1 (tracking).
3 Adjusted at Io nom.
4 Fixed value, resistor-adjusted (
±2% at 25°C) acc. to customer's specifications; individual type number is determined by Melcher.
V output (V0, V2, V3):
Connector pin V is internally connected to the open collec-
tor of a NPN transistor. The emitter is connected to the
negative potential of output 1.
U V
≤ 0.6 V (logic low) corre-
sponds to a monitored voltage level (
U i and/or Uo1) <Ut.
The current
I V through the open collector should not exceed
50 mA. The NPN output is not protected against external
overvoltages.
U V should not exceed 60 V.
Ui, Uo1 status
V output,
UV
Ui or Uo1 < Ut
low, L,
UV
≤ 0.6 V at IV = 50 mA
Ui and Uo1 > Ut + Uh
high, H,
I V ≤ 25 A at UV = 5.1 V
Vo1+
Vo1–
V
UV
IV
RP
N
P
Fig. 28
Output configuration of options V0, V2 and V3
相关PDF资料 |
PDF描述 |
|---|---|
| LK4003-6EPV2TB1 | 1-OUTPUT 150 W AC-DC PWR FACTOR CORR MODULE |
| LK4301-7ERD8TB1 | 1-OUTPUT 150 W AC-DC PWR FACTOR CORR MODULE |
| LK4601-7EPD1TB2 | 1-OUTPUT 150 W AC-DC PWR FACTOR CORR MODULE |
| LK4601-7ERD5TB2 | 1-OUTPUT 150 W AC-DC PWR FACTOR CORR MODULE |
| LK5320-7EPD2TB2 | 2-OUTPUT 150 W AC-DC PWR FACTOR CORR MODULE |
相关代理商/技术参数 |
参数描述 |
|---|---|
| LS1001-9ER | 制造商:Power-One 功能描述:AC/DC Power Supply Single-OUT 5.1V 16A 100W 17-Pin 制造商:Power-One 功能描述:ACDC - Bulk |
| LS10019ERD4B1 | 制造商:Power-One 功能描述: |
| LS1001-9ERD4B1 | 功能描述:线性和开关式电源 CONVERSOR AC/DC 85-264VCA OR 88-372V RoHS:否 制造商:TDK-Lambda 产品:Switching Supplies 开放式框架/封闭式:Enclosed 输出功率额定值:800 W 输入电压:85 VAC to 265 VAC 输出端数量:1 输出电压（通道 1）:20 V 输出电流（通道 1）:40 A 商用/医用: 输出电压（通道 2）: 输出电流（通道 2）: 安装风格:Rack 长度: 宽度: 高度: |
| LS1001A-W1 | 制造商:Black Box Corporation 功能描述:1 YEAR WARRANTY FOR LS1001A |
| LS10020-8PP8 | 制造商:LOCKHD 功能描述: |
发布紧急采购，3分钟左右您将得到回复。