参数资料
型号: LS2540-7EPD0B1
厂商: POWER-ONE INC
元件分类: 电源模块
英文描述: 2-OUTPUT AC-DC REG PWR SUPPLY MODULE
封装: METAL, CASE S02, MODULE
文件页数: 13/33页
文件大小: 438K
代理商: LS2540-7EPD0B1
S Series Data Sheet
100 Watt AC-DC and DC-DC Converters
APR 26, 2006 revised to SEP 25, 2006
Page 20 of 33
www.power-one.com
Table 14: Isolation
Characteristic
Input to
Output to
Unit
case + output(s)
case
output
Electric
Factory test >1 s
2.8
1
1.4
0.14
kVDC
strength
AC test voltage equivalent to factory test
2.0
1.0
0.1
kVAC
test voltage
Insulation resistance at 500 VDC
300
2
300
2
100
M
Ω
1 In accordance with EN 50116 and IEC/EN 60950 subassemblies are pretested with 5.6 kVDC.
2 Tested at 500 VDC.
Isolation
The electric strength test is performed in the factory as routine
test in accordance with EN 50116, IEC/EN 60950 and UL 1950
and should not be repeated in the field. Power-One will not
honor any guarantee claims resulting from electric strength field
tests.
LS-models Operated at Greater than 63 Hz
Above 63 Hz the earth leakage current may exceed 3.5 mA, the
maximum specified in IEC/EN 60950. The built-in Y-caps are
only approved for
≤ 100 Hz. Frequencies greater than 350 Hz
are only permitted for Vi ≤ 200 VAC.
Characteristic
Class I
Unit
LS1000, LS2000
Maximum earth
Permissible according to IEC/EN 60950
3.5
mA
leakage current
Specified value at 264 V, 50 Hz
1.43
Table 13: Leakage Currents for LS-models
Standards and Approvals
The converters are UL recognized according to UL 1950,
CAN/CSA C22.2 No. 950-95, and TV approved to IEC/EN
60950 standards.
The converters correspond to Class I equipment and have been
evaluated for:
Building in,
Basic insulation between input and case based on 250 V and
double or reinforced insulation or an earthed part between
input and output.
The use in a pollution degree 2 environment,
Connecting the input to a primary or secondary circuit which
is subject to a maximum transient rating of 2500 V.
The converters are subject to manufacturing surveillance in
accordance with the above mentioned UL and ISO 9001:2000
standards.
Railway Applications
The S Series converters have been designed according to
the Railway Standards EN50155 and EN50121. All boards
and components are coated with a protective lacquer.
Cleaning Agents
In order to avoid possible damage, any penetration of
cleaning fluids must be prevented, since the power
supplies are not hermetically sealed.
Protection Degree
Condition: Female connector fitted to the converter.
IP 30:
All models except those with option P and option
D,
or V with potentiometer.
IP 20:
All models exhibiting a potentiometer.
相关PDF资料
PDF描述
LS2540-7ERD6TB1 2-OUTPUT 100 W AC-DC REG PWR SUPPLY MODULE
LS2540-7RD8 2-OUTPUT AC-DC REG PWR SUPPLY MODULE
LS2540-9EPD4T 2-OUTPUT 100 W AC-DC REG PWR SUPPLY MODULE
LS2540-9RD5TB1 2-OUTPUT AC-DC REG PWR SUPPLY MODULE
LS2660-7ERD0B1 2-OUTPUT AC-DC REG PWR SUPPLY MODULE
相关代理商/技术参数
参数描述
LS2540-7R 功能描述:线性和开关式电源 Euro-Cassette 100W (2x 15V) RoHS:否 制造商:TDK-Lambda 产品:Switching Supplies 开放式框架/封闭式:Enclosed 输出功率额定值:800 W 输入电压:85 VAC to 265 VAC 输出端数量:1 输出电压(通道 1):20 V 输出电流(通道 1):40 A 商用/医用: 输出电压(通道 2): 输出电流(通道 2): 安装风格:Rack 长度: 宽度: 高度:
LS2540-9ER 制造商:Power-One 功能描述:ACDC - Bulk
LS2543-7R 制造商:Power-One 功能描述:- Bulk
LS2545-7R 制造商:Power-One 功能描述:- Bulk
LS2548 制造商:TDK-Lambda Corporation 功能描述:AC/DC Power Supply Single-OUT 48V 0.57A 5-Pin 制造商:TDK-Lambda Corporation 功能描述:- Bulk