- 您现在的位置：买卖IC网 > PDF目录80327 > LS4601-7PD8TB1 (POWER-ONE INC) 1-OUTPUT 100 W AC-DC PWR FACTOR CORR MODULE PDF资料下载
参数资料
| 型号： | LS4601-7PD8TB1 |
| 厂商： | POWER-ONE INC |
| 元件分类： | 电源模块 |
| 英文描述： | 1-OUTPUT 100 W AC-DC PWR FACTOR CORR MODULE |
| 封装： | METAL, CASE S02, MODULE |
| 文件页数： | 14/27页 |
| 文件大小： | 599K |
| 代理商： | LS4601-7PD8TB1 |
第1页第2页第3页第4页第5页第6页第7页第8页第9页第10页第11页第12页第13页当前第14页第15页第16页第17页第18页第19页第20页第21页第22页第23页第24页第25页第26页第27页
Cassette Style
100 Watt AC-DC Converters
S Series PFC
Edition 01/01.2001
21/27
P Potentiometer
The potentiometer provides an output voltage adjustment
range of +10/–60% of
Uo nom and is accessible through a
hole in the front cover. This feature enables compensation
for voltage drops across the connector and wiring. Option P
is not recommended if units are connected in parallel.
Option P excludes the R-function. With double output units
both outputs are affected by the potentiometer setting (dou-
bling the voltage setting if the outputs are in series).
If the output voltages are increased above
Uo nom via R-in-
put control, option P setting, remote sensing or option T, the
output current(s) should be reduced accordingly so that
Po nom is not exceeded.
-9 Extended Temperature Range
Option –9 extends the operational ambient temperature
range from –25...71
°C (standard) to –40...71°C. The power
supplies provide full nominal output power with convection
cooling. Option -9 excludes inrush current limitation by
NTC.
Description of Options
Table 16: Survey of options
Option
Function of option
Characteristic
–9
Extended operational ambient temperature range
TA = –40...71°C
E
Electronic inrush current limitation circuitry
Active inrush current limitation
P 1
Potentiometer for fine adjustment of output voltage
Adjustment range +10/-60% of
Uo nom, excludes R input
D 2
Input and/or output undervoltage monitoring circuitry
Safe data signal output (D0...DD)
V 2 3
Input and/or output undervoltage monitoring circuitry
ACFAIL signal according to VME specifications (V0, V2, V3)
T
Current sharing
Interconnect T-pins if paralleling outputs (5 units max.)
B1, B2
Cooling plate
Replaces standard heat sink, allowing direct chassis-mounting
1 Function R excludes option P and vice versa
2 Option D excludes option V and vice versa
3 Only available if main output voltage Uo1 = 5.1 V
Table 14: Leakage currents
Characteristic
Class I
Unit
LS 4000...LS 5000
Maximum earth
Permissible according to IEC/EN 60950
3.5
mA
leakage current
Specified value at 254 V, 50 Hz
0.82
Safety of operator accessible output circuit
If the output circuit of an AC-DC converter is operator ac-
cessible, it shall be an SELV circuit according to the IEC/EN
60950 related safety standards.
The following table shows a possible installation configura-
tion, compliance with which causes the output circuit of an
S series AC-DC converter to be an SELV circuit according
to IEC/EN 60950 up to a configured output voltage (sum of
nominal voltages if in series or +/– configuration) of 36 V.
However, it is the sole responsibility of the installer to as-
sure the compliance with the relevant and applicable safety
regulations. More information is given in:
Technical Infor-
mation: Safety.
Table 15: Safety concept leading to an SELV output circuit
Conditions
AC-DC converter
Installation
Result
Nominal voltage
Grade of insulation
Measures to achieve the resulting
Safety status of the AC-DC
between input and output
safety status of the output circuit
converter output circuit
provided by the AC-DC converter
Mains
Double or reinforced
Earthed case 1 and installation
SELV circuit
≤250 V AC
according to the applicable standards
1 The earth connection has to be provided by the installer according to the relevant safety standards, e.g. IEC/EN 60950.
AC-DC
con-
verter
Mains
SELV
Earth connection
+
–
~
10021
Fuse
Fig. 30
Schematic safety concept. Use fuses and earth connec-
tion as per Installation Instructions and table Safety con-
cept leading to an SELV output circuit.
相关PDF资料 |
PDF描述 |
|---|---|
| LS4601-7PD9B1 | 1-OUTPUT 100 W AC-DC PWR FACTOR CORR MODULE |
| LS4601-9EPD4B2 | 1-OUTPUT 100 W AC-DC PWR FACTOR CORR MODULE |
| LS4601-9ERDDT | 1-OUTPUT 100 W AC-DC PWR FACTOR CORR MODULE |
| LS5320-7PD3TB2 | 2-OUTPUT 100 W AC-DC PWR FACTOR CORR MODULE |
| LS5320-7PD9T | 2-OUTPUT 100 W AC-DC PWR FACTOR CORR MODULE |
相关代理商/技术参数 |
参数描述 |
|---|---|
| LS4601-7R | 功能描述:线性和开关式电源 Euro-Cassette 100W (24V) RoHS:否 制造商:TDK-Lambda 产品:Switching Supplies 开放式框架/封闭式:Enclosed 输出功率额定值:800 W 输入电压:85 VAC to 265 VAC 输出端数量:1 输出电压（通道 1）:20 V 输出电流（通道 1）:40 A 商用/医用: 输出电压（通道 2）: 输出电流（通道 2）: 安装风格:Rack 长度: 宽度: 高度: |
| LS4601-9ER | 制造商:Power-One 功能描述:ACDC - Bulk |
| LS46019RB1 | 制造商:Power-One 功能描述:AC-DC Converter FACTORY PACKED |
| LS4601-9RB1 | 制造商:Power-One 功能描述:AC-DC Converter FACTORY PACKED |
| LS460-RH | 功能描述:INVERTER 10.8-13.2V IN 1300V OUT RoHS:是 类别:光电元件 >> 反相器 系列:- 标准包装:100 系列:- 输入电压:6.0V 输出:900V 类型:用于 CCFL 和 UV 灯的逆变器 尺寸/尺寸:2.34" L x 0.35" W x 0.35" H（59.5mm x 9mm x 8.9mm） 安装类型:底座安装 |
发布紧急采购，3分钟左右您将得到回复。