- 您现在的位置：买卖IC网 > PDF目录32308 > LSM-1/10-D5-C (MURATA POWER SOLUTIONS INC) 1-OUTPUT 10 W DC-DC REG PWR SUPPLY MODULE PDF资料下载
参数资料
| 型号： | LSM-1/10-D5-C |
| 厂商： | MURATA POWER SOLUTIONS INC |
| 元件分类： | 电源模块 |
| 英文描述： | 1-OUTPUT 10 W DC-DC REG PWR SUPPLY MODULE |
| 封装： | ROHS COMPLIANT, SMT-6 |
| 文件页数： | 10/13页 |
| 文件大小： | 460K |
| 代理商： | LSM-1/10-D5-C |
The highest temperatures in LSM D5 SMT's occur at their output inductor,
whose heat is generated primarily by I2R losses. The derating curves were
developed using thermocouples to monitor the inductor temperature and
varying the load to keep that temperature below +110°C under the assorted
conditions of air ow and air temperature. Once the temperature exceeds
+115°C (approx.), the thermal protection will disable the converter. Automatic
restart occurs after the temperature has dropped below +110°C.
As you may deduce from the derating curves and observe in the efciency
curves on the following pages, LSM D5 SMT's are more efcient at lower
current levels. Also I2R losses in the output inductor are signicantly less at
lower current levels. Consequently, LSN-D5 SMT's deliver very impressive
temperature performance if operating at less than full load.
Lastly, when LSM D5 SMT's are installed in system boards, they are obvi-
ously subject to numerous factors and tolerances not taken into account here.
If you are attempting to extract the most current out of these units under
demanding temperature conditions, we advise you to monitor the output-
inductor temperature to ensure it remains below +110°C at all times.
Output Reverse Conduction
Many DC/DC's using synchronous rectication suffer from Output Reverse
Conduction. If those devices have a voltage applied across their output before
a voltage is applied to their input (this typically occurs when another power
supply starts before them in a power-sequenced application), they will either
fail to start or self destruct. In both cases, the cause is the "freewheeling" or
"catch" FET biasing itself on and effectively becoming a short circuit.
LSM D5 SMT DC/DC converters do not suffer from Output Reverse Conduc-
tion. They employ proprietary gate drive circuitry that makes them immune
to applied output voltages.
Thermal Considerations and Thermal Protection
The typical output-current thermal-derating curves shown below enable
designers to determine how much current they can reliably derive from each
model of the LSM D5 SMT's under known ambient-temperature and air-ow
conditions. Similarly, the curves indicate how much air ow is required to
reliably deliver a specic output current at known temperatures.
Figure 7. Trim Connections Using Fixed Resistors
Figure 6. Trim Connections Using a Trimpot
Trim Equations
Note: Resistor values are in k
Ω. Accuracy of adjustment is subject to
tolerances of resistors and factory-adjusted, initial output accuracy.
VO = desired output voltage. VO
NOM = nominal output voltage.
Note: LSM-0.8/10-D5 is not trimmable.
UP
VO – 1
RT (k ) =
1.296
DOWN
1 – VO
RT
(k ) =
–
1
–
1
1.62(VO – 0.8)
UP
VO – 1.2
RT (k ) =
1.992
DOWN
1.2 – VO
RT
(k ) =
–
2.37
–
2.37
2.49(VO – 0.8)
UP
RT (k ) =
6
DOWN
RT
(k ) =
–
4.99
–
4.99
7.5(VO – 0.8)
UP
VO – VO NOM
RT (k ) =
1.896
DOWN
VO NOM – VO
RT
(k ) =
–
4.99
–
4.99
2.37(VO – 0.8)
LSM-1/10-D5
Model
LSM-3.3/10-D5
LSM-1.2/10-D5
LSM-1.5/10-D5
LSM-1.8/10-D5
LSM-2/10-D5
LSM-2.5/10-D5
Trim Equations
Note:
Install either a xed
trim-up resistor
or a xed trim-down
resistor depending upon
desired output voltage.
LSM-10A D5 Models
Single Output, Non-Isolated, 5VIN, 0.8-3.3VOUT, 10A, DC/DC's in SMT Packages
Technical enquiries email: sales@murata-ps.com, tel: +1 508 339 3000
www.murata-ps.com
MDC_LSM10A-D5.B01 Page 6 of 13
相关PDF资料 |
PDF描述 |
|---|---|
| LSM-0.8/10-D5-C | 1-OUTPUT 8 W DC-DC REG PWR SUPPLY MODULE |
| LSM-2/10-D5-C | 1-OUTPUT 20 W DC-DC REG PWR SUPPLY MODULE |
| LSP3171MSAD | SWITCHING REGULATOR, 470 kHz SWITCHING FREQ-MAX, PDSO10 |
| LT1009CPWG4 | 1-OUTPUT TWO TERM VOLTAGE REFERENCE, 2.5 V, PDSO8 |
| LT1009IPWG4 | 1-OUTPUT TWO TERM VOLTAGE REFERENCE, 2.5 V, PDSO8 |
相关代理商/技术参数 |
参数描述 |
|---|---|
| LSM115J | 功能描述:DIODE SCHOTTKY 1A 15V DO214BA RoHS:否 类别:分离式半导体产品 >> 单二极管/整流器 系列:- 标准包装:100 系列:- 二极管类型:标准 电压 - (Vr)（最大）:50V 电流 - 平均整流 (Io):6A 电压 - 在 If 时为正向 (Vf)（最大）:1.4V @ 6A 速度:快速恢复 = 200mA（Io） 反向恢复时间(trr):300ns 电流 - 在 Vr 时反向漏电:15µA @ 50V 电容@ Vr, F:- 安装类型:底座，接线柱安装 封装/外壳:DO-203AA，DO-4，接线柱 供应商设备封装:DO-203AA 包装:散装 其它名称:*1N3879 |
| LSM115JE3/TR13 | 功能描述:DIODE SCHOTTKY 1A 15V DO214BA RoHS:是 类别:分离式半导体产品 >> 单二极管/整流器 系列:- 标准包装:100 系列:- 二极管类型:标准 电压 - (Vr)（最大）:50V 电流 - 平均整流 (Io):6A 电压 - 在 If 时为正向 (Vf)（最大）:1.4V @ 6A 速度:快速恢复 = 200mA（Io） 反向恢复时间(trr):300ns 电流 - 在 Vr 时反向漏电:15µA @ 50V 电容@ Vr, F:- 安装类型:底座，接线柱安装 封装/外壳:DO-203AA，DO-4，接线柱 供应商设备封装:DO-203AA 包装:散装 其它名称:*1N3879 |
| LSM115JTR7 | 制造商:Microsemi Corporation 功能描述: |
| LSM-11D | 制造商:EATON MOELLER 功能描述:BASIC UNIT METAL 1EARLY BR IP66 |
| LSM-11S | 制造商:Eaton 功能描述:Bulk 制造商:EATON MOELLER 功能描述:BASIC UNIT METAL 1NO/1NC IP66 |
发布紧急采购，3分钟左右您将得到回复。