LSN2 Series
Non-isolated, DOSA-SIP, 6/10/16A Selectable-Output DC/DC Converters
MDC_LSN2_A03 Page 2 of 14
D C / D C C O N V E R T E R S
Technical enquiries email: sales@murata-ps.com, tel: +1 508 339 3000
www.murata-ps.com
PART NUMBER STRUCTURE
PERFORMANCE SPECIFICATIONS AND ORDERING GUIDE
Root Model
Output
Input
Efficiency
Package
(Case/
Pinout)
VOUT
(Volts)
IOUT
(Amps)
Power
(Watts)
R/N (mVp-p)
Regulation
VIN Nom.
(Volts)
Range
(Volts)
IIN
(mA/A)
Typ.
Max.
Line
Load
Min.
Typ.
LSN2-T/6-W3
0.75-3.3
6
19.8
25
40
±0.075%
±0.055%
5
2.4-5.5
50/4.2
93.1%
94.3%
B12, P69
LSN2-T/6-D12
0.75-5
6
30
15
25
±0.3%
12
8.3-14
70/2.69
90%
93%
B12, P69
LSN2-T/10-W3
0.75-3.3
10
33.0
15
25
±0.3%
5
2.4-5.5
50/6.95
93%
95%
B11, P68
LSN2-T/10-D12
0.75-5
10
50
30
75
±0.3%
12
8.3-14
100/4.39
93%
95%
B11, P68
LSN2-T/16-W3
0.75-3.3
16
52.8
25
50
±0.3%
5
2.4-5.5
50/11.12
93%
95%
B11, P68
LSN2-T/16-D12
0.75-5
16
80
30
75
±0.3%
12
8.3-14
100/7.1
92%
94%
B11, P68
Maximum Rated Output
Current in Amps
Non-Isolated SMT
Output Configuration:
L = Unipolar
Low Voltage
Nominal Output Voltage:
0.75-3.3 Volts (W3)
0.75-5 Volts (D12)
L SN2 - /
D12
-
T 16
N G
Input Voltage Range:
D12 = 8.3-14 Volts (12V nominal)
W3 = 2.4-5.5 Volts (5V nominal)
On/Off Polarity:
Blank = Positive polarity
N = Negative polarity
Power Good Output:
Blank = Omitted
G = Installed
Typical at TA = +25°C under nominal line voltage and full-load conditions, unless noted. All
models are tested and specified with external 22F tantalum input and output capacitors.
These capacitors are necessary to accommodate our test equipment and may not be required
to achieve specified performance in your applications. See I/O Filtering and Noise Reduction.
“Nominal” output is 3.3V (W3 models) or 5V (D12 models)
Ripple/Noise (R/N) is tested/specified over a 20MHz bandwidth and may be reduced with
external filtering. See I/O Filtering and Noise Reduction for details.
These devices have no minimum-load requirements and will regulate under no-load
conditions. Regulation specifications describe the output-voltage deviation as the line voltage
or load is varied from its nominal/midpoint value to either extreme.
Nominal line voltage, no-load/full-load conditions.
VIN must be
≥0.5V greater than VOUT.
LSN2-TXX-D12 efficiencies are shown at 5VOUT.
These are not complete model numbers. Please refer to the Part Number Structure when
ordering.
Note:
Not all model number combinations are
available. Contact MPS.
C
RoHS-6 compliant*
-
*Contact MPS for availability.