
LSN2 Series
Non-isolated, DOSA-SIP, 6/10/16A
Selectable-Output DC/DC Converters
Technical enquiries email: sales@murata-ps.com, tel: +1 508 339 3000
www.murata-ps.com
MDC_LSN2.B05 Page 2 of 15
PERFORMANCE SPECIFICATIONS AND ORDERING GUIDE
Root Model
Output
Input
Efficiency
Package
(Case/
Pinout)
Vout
(Volts)
Iout
(Amps)
Power
(Watts)
R/N (mVp-p)
Regulation
Vin Nom.
(Volts)
Range
(Volts)
Iin
(mA/A)
Typ.
Max.
Line
Load
Min.
Typ.
LSN2-T/6-W3
0.75-3.3
6
19.8
25
40
±0.075% ±0.055%
5
2.4-5.5
50/4.2
93.1%
94.3%
B12, P69
LSN2-T/6-D12
0.75-5
6
30
15
25
±0.3%
12
8.3-14
70/2.69
90%
93%
B12, P69
LSN2-T/10-W3
0.75-3.3
10
33.0
15
25
±0.3%
5
2.4-5.5
50/6.95
93%
95%
B11, P68
LSN2-T/10-D12
0.75-5
10
50
30
75
±0.3%
12
8.3-14
100/4.39
93%
95%
B11, P68
LSN2-T/16-W3
0.75-3.3
16
52.8
25
50
±0.3%
5
2.4-5.5
50/11.12
93%
95%
B11, P68
LSN2-T/16-D12
0.75-5
16
80
30
75
±0.3%
12
8.3-14
100/7.1
92%
94%
B11, P68
LSN2-T/30-D12
0.8-5
30
150
Please refer to the separate LSN2-T/30 data sheet.
Typical at Ta = +25°C under nominal line voltage and full-load conditions, unless noted. All models
are tested and specified with external 22F tantalum input and output capacitors. These capacitors
are necessary to accommodate our test equipment and may not be required to achieve specified
performance in your applications. See I/O Filtering and Noise Reduction. “Nominal” output is 3.3V
(W3 models) or 5V (D12 models)
Ripple/Noise (R/N) is tested/specified over a 20MHz bandwidth and may be reduced with external
filtering. See I/O Filtering and Noise Reduction for details.
These devices have no minimum-load requirements and will regulate under no-load conditions. Regula-
tion specifications describe the output-voltage deviation as the line voltage or load is varied from its
nominal/midpoint value to either extreme.
Nominal line voltage, no-load/full-load conditions.
VIN must be ≥0.5V greater than VOUT.
LSN2-TXX-D12 efficiencies are shown at 5VOUT.
These are not complete model numbers. Please refer to the Part Number Structure when ordering.
PART NUMBER STRUCTURE
Maximum Rated Output:
Current in Amps
Non-Isolated Through-hole
Output Configuration:
L = Unipolar
Low Voltage
Nominal Output Voltage:
0.75-3.3 Volts (W3)
0.75-5 Volts (D12)
L SN2 -
/
D12
-
T 16
N G
Input Voltage Range:
D12 = 8.3-14 Volts (12V nominal)
W3 = 2.4-5.5 Volts (5V nominal)
On/Off Polarity:
Blank = Positive polarity
N = Negative polarity
Power Good Output:
Blank = Omitted
G = Installed
These devices have no minimum-load requirements and will regu-
late under no-load conditions. Regulation specifications describe
the output-voltage deviation as the line voltage or load is varied
from its nominal/midpoint value to either extreme.
Nominal line voltage, no-load/full-load conditions.
VIN must be ≥0.5V greater than VOUT.
LSN2-TXX-D12 efficiencies are shown at 5VOUT.
These are not complete model numbers. Please refer to the
Part Number Structure when ordering.
Note:
Some model number combinations may
not be available. Contact Murata Power
Solutions for further information.
C
RoHS-6 hazardous substance compliant
-