参数资料
| 型号： | LT1013CN8#PBF |
| 厂商： | Linear Technology |
| 文件页数： | 2/26页 |
| 文件大小： | 0K |
| 描述： | IC PRECISION OP-AMP DUAL 8-DIP |
| 标准包装： | 50 |
| 放大器类型： | 通用 |
| 电路数： | 2 |
| 转换速率： | 0.4 V/µs |
| 电流 - 输入偏压： | 15nA |
| 电压 - 输入偏移： | 60µV |
| 电流 - 电源： | 350µA |
| 电流 - 输出 / 通道： | 20mA |
| 电压 - 电源，单路/双路(±)： | 4 V ~ 44 V，±2 V ~ 22 V |
| 工作温度： | 0°C ~ 70°C |
| 安装类型： | 通孔 |
| 封装/外壳： | 8-DIP（0.300"，7.62mm） |
| 供应商设备封装： | 8-PDIP |
| 包装： | 管件 |
| 产品目录页面： | 1317 (CN2011-ZH PDF) |
LT1013/LT1014
0
10134fd
b) When the input is more than 400mV below ground
(at 25°C), the input stage saturates (transistors Q3 and
Q4) and phase reversal occurs at the output. This can
cause lock-up in servo systems. Due to a unique phase
reversal protection circuitry (Q21, Q22, Q27, Q28), the
LT1013/LT1014’s outputs do not reverse, as illustrated
below, even when the inputs are at –1.5V.
Thereisonecircumstance,however,underwhichthephase
reversal protection circuitry does not function: when the
other op amp on the LT1013, or one specific amplifier of
the other three on the LT1014, is driven hard into negative
saturation at the output.
Phase reversal protection does not work on amplifier:
A when D’s output is in negative saturation. B’s and C’s
outputs have no effect.
B when C’s output is in negative saturation. A’s and D’s
outputs have no effect.
C when B’s output is in negative saturation. A’s and D’s
outputs have no effect.
applicaTions inForMaTion
D when A’s output is negative saturation. B’s and C’s
outputs have no effect.
At the output, the aforementioned single supply designs
either cannot swing to within 600mV of ground (OP-20)
orcannotsinkmorethanafewmicroampereswhileswing-
ing to ground (LM124, LM158). The LT1013/LT1014’s
all-NPNoutputstagemaintainsitslowoutputresistanceand
high gain characteristics until the output is saturated.
In dual supply operations, the output stage is crossover
distortion-free.
Comparator Applications
The single supply operation of the LT1013/LT1014 lends
itself to its use as a precision comparator with TTL com-
patible output:
In systems using both op amps and comparators, the
LT1013/LT1014 can perform multiple duties; for example,
on the LT1014, two of the devices can be used as op amps
and the other two as comparators.
4V
LT1013/LT1014
NO PHASE REVERSAL
2V
4V
0V
6VP-P INPUT, –1.5V TO 4.5V
4V
LM324, LM358, OP-20
EXHIBIT OUTPUT PHASE
REVERSAL
VS = 5V, 0V
4
2
0
–100
0
2
0
100
INPUT
(mV)
OUTPUT
(V)
INPUT
(mV)
OUTPUT
(V)
Voltage Follower with Input Exceeding the Negative Common Mode Range
Comparator Rise Response Time
10mV, 5mV, 2mV Overdrives
Comparator Fall Response Time
to 10mV, 5mV, 2mV Overdrives
2V
0V
4
50s/DIV
VS = 5V, 0V
50s/DIV
相关PDF资料 |
PDF描述 |
|---|---|
| 1PMT12AT1G | TVS ZENER 200W 12V POWERMITE |
| 76383-309LF | CONN HEADER 18PS.100 DL R/A GOLD |
| TMM-105-01-T-D | CONN HEADER 10POS DUAL 2MM T/H |
| TSW-121-23-T-S | CONN HEADER 21POS .100" SNGL TIN |
| TSW-107-23-S-S | CONN HEADER 7POS .100" SGL GOLD |
相关代理商/技术参数 |
参数描述 |
|---|---|
| LT1013CP | 功能描述:运算放大器 - 运放 Dual Precision RoHS:否 制造商:STMicroelectronics 通道数量:4 共模抑制比（最小值）:63 dB 输入补偿电压:1 mV 输入偏流（最大值）:10 pA 工作电源电压:2.7 V to 5.5 V 安装风格:SMD/SMT 封装 / 箱体:QFN-16 转换速度:0.89 V/us 关闭:No 输出电流:55 mA 最大工作温度:+ 125 C 封装:Reel |
| LT1013CPE4 | 功能描述:运算放大器 - 运放 Dual Prec Lo-Pwr Op Amp RoHS:否 制造商:STMicroelectronics 通道数量:4 共模抑制比（最小值）:63 dB 输入补偿电压:1 mV 输入偏流（最大值）:10 pA 工作电源电压:2.7 V to 5.5 V 安装风格:SMD/SMT 封装 / 箱体:QFN-16 转换速度:0.89 V/us 关闭:No 输出电流:55 mA 最大工作温度:+ 125 C 封装:Reel |
| LT1013CPG4 | 制造商:Texas Instruments 功能描述:OP AMP DUAL PRECISION 1013 DIP8 制造商:Texas Instruments 功能描述:OP AMP, DUAL PRECISION, 1013, DIP8 |
| LT1013D | 制造商:TI 制造商全称:Texas Instruments 功能描述:DUAL PRECISION OPERATIONAL AMPLIFIERS |
| LT1013DC/D | 制造商:未知厂家 制造商全称:未知厂家 功能描述:Voltage-Feedback Operational Amplifier |
发布紧急采购，3分钟左右您将得到回复。