参数资料
| 型号： | LT1083CP-5#PBF |
| 厂商： | Linear Technology |
| 文件页数： | 7/12页 |
| 文件大小： | 0K |
| 描述： | IC REG LDO 5V 7.5A TO-3P-3 |
| 产品培训模块： | More Information on LDOs |
| 标准包装： | 30 |
| 稳压器拓扑结构： | 正，固定式 |
| 输出电压： | 5V |
| 输入电压： | 最高 25V |
| 电压 - 压降（标准）： | 1.3V @ 7.5A |
| 稳压器数量： | 1 |
| 电流 - 输出： | 7.5A |
| 电流 - 限制（最小）： | 8A |
| 工作温度： | 0°C ~ 150°C |
| 安装类型： | 通孔 |
| 封装/外壳： | TO-247-3 |
| 供应商设备封装： | TO-247-3 |
| 包装： | 散装 |
| 产品目录页面： | 1325 (CN2011-ZH PDF) |
LT1083/LT1084/LT1085 Fixed
BLOCK DIAGRA
V IN
+
–
THERMAL
LIMIT
V OUT
GND
LT1083/4/5 BD
APPLICATIO S I FOR ATIO
The LT1083 family of three-terminal regulators are easy to
use and have all the protection features that are expected
in high performance voltage regulators. They are short
circuit protected, have safe area protection as well as
thermal shutdown to turn off the regulator should the
temperature exceed about 165 ° C.
These regulators offer lower dropout voltage and more
precise reference tolerance. Further, the reference stabil-
ity with temperature is improved over older types of
regulators. The only circuit difference between using the
LT1083 family and older regulators is that they require an
output capacitor for stability.
Stability
The circuit design used in the LT1083 family requires the
use of an output capacitor as part of the device frequency
compensation. For all operating conditions, the addition of
150 μ F aluminum electrolytic or a 22 μ F solid tantalum on
the output will ensure stability. Normally capacitors much
smaller than this can be used with the LT1083. Many
different types of capacitors with widely varying charac-
teristics are available. These capacitors differ in capacitor
tolerance (sometimes ranging up to ± 100%), equivalent
series resistance, and capacitance temperature coeffi-
cient. The 150 μ F or 22 μ F values given will ensure stability.
Normally, capacitor values on the order of 100 μ F are used
in the output of many regulators to ensure good transient
response with heavy load current changes. Output capaci-
tance can be increased without limit and larger values of
output capacitance further improve stability and transient
response of the LT1083 regulators.
Another possible stability problem that can occur in
monolithic IC regulators is current limit oscillations.
These can occur because in current limit the safe area
protection exhibits a negative impedance. The safe area
protection decreases the current limit as the input-to-
output voltage increases.That is the equivalent of having
a negitive resistance since increasing voltage causes
current to decrease. Negitive resistance during current
limit is not unique to the LT1083 series and has been
present on all power IC regulators. The value of negative
resistance is a function of how fast the current limit is
1083ffd
7
相关PDF资料 |
PDF描述 |
|---|---|
| 80MXG4700MEFCSN35X30 | CAP ALUM 4700UF 80V 20% SNAP-IN |
| LT1963AMPQ#PBF | IC REG LDO ADJ 1.5A 5-DD |
| 400MXG330MEFCSN35X30 | CAP ALUM 330UF 400V 20% SNAP-IN |
| 200USC1500MEFCSN35X35 | CAP ALUM 1500UF 200V 20% SNAP-IN |
| LT1763MPDE#PBF | IC REG LDO ADJ .5A 12-DFN |
相关代理商/技术参数 |
参数描述 |
|---|---|
| LT1083CPPBF | 制造商:Linear Technology 功能描述:LT1083CPPBF |
| LT1083MK | 制造商:Linear Technology 功能描述:LDO Regulator Pos 1.25V to 28.5V 7.5A 3-Pin(2+Tab) TO-3 |
| LT1083MK-12 | 制造商:Linear Technology 功能描述:LDO Regulator Pos 12V 7.5A 3-Pin(2+Tab) TO-3 |
| LT1083MK-5 | 制造商:Linear Technology 功能描述:LDO Regulator Pos 5V 7.5A 3-Pin(2+Tab) TO-3 |
| LT1084CK | 制造商:Linear Technology 功能描述:LDO Regulator Pos 1.25V to 28.5V 5A 3-Pin(2+Tab) TO-3 |
发布紧急采购，3分钟左右您将得到回复。