参数资料
型号: LT1171CT#FLOW-06PBF
厂商: LINEAR TECHNOLOGY CORP
元件分类: 稳压器
英文描述: 5.5 A SWITCHING REGULATOR, 115 kHz SWITCHING FREQ-MAX, PZFM5
封装: LEAD FREE, PLASTIC, TO-220, 5 PIN
文件页数: 20/24页
文件大小: 225K
代理商: LT1171CT#FLOW-06PBF
LT1170/LT1171/LT1172
5
117012fg
SYMBOL PARAMETER
CONDITIONS
MIN
TYP
MAX
UNITS
DCMAX
Maximum Switch Duty Cycle
l
85
92
97
%
Shutdown Mode
Supply Current
3V ≤ VIN ≤ VMAX
VC = 0.05V
100
250
μA
Shutdown Mode
Threshold Voltage
3V ≤ VIN ≤ VMAX
l
100
50
150
250
300
mV
Flyback Sense Delay Time (Note 5)
1.5
μs
ELECTRICAL CHARACTERISTICS The l denotes the specifications which apply over the full operating
temperature range, otherwise specifications are at TA = 25°C. VIN = 15V, VC = 0.5V, VFB = VREF, output pin open, unless otherwise noted.
Note 1: Stresses beyond those listed under Absolute Maximum Ratings
may cause permanent damage to the device. Exposure to any Absolute
Maximum Rating condition for extended periods may affect device
reliability and lifetime.
Note 2: Minimum effective switch “on” time for the LT1170/LT1171/
LT1172 (in current limit only) is ≈ 0.6μs. This limits the maximum safe
input voltage during an output shorted condition. Buck mode and inverting
mode input voltage during an output shorted condition is limited to:
VIN (max, output shorted) = 15V
+
R
(
) IL
(
)+Vf
t
(
) f()
buck and inverting mode
R = Inductor DC resistance
IL = 10A for LT1170, 5A for LT1171, and 2.5A for LT1172
Vf = Output catch diode forward voltage at IL
t = 0.6μs, f = 100kHz switching frequency
Maximum input voltage can be increased by increasing R or Vf.
External current limiting such as that shown in AN19, Figure 39, will
provide protection up to the full supply voltage rating. C1 in Figure 39
should be reduced to 200pF.
Transformer designs will tolerate much higher input voltages because
leakage inductance limits rate of rise of current in the switch. These
designs must be evaluated individually to assure that current limit is well
controlled up to maximum input voltage.
Boost mode designs are never protected against output shorts because
the external catch diode and inductor connect input to output.
Note 3: Measured with VC in hi clamp, VFB = 0.8V. ISW = 4A for LT1170,
2A for LT1171, and 1A for LT1172.
Note 4: For duty cycles (DC) between 50% and 80%, minimum guaranteed
switch current is given by ILIM = 3.33 (2 – DC) for the LT1170, ILIM = 1.67
(2 – DC) for the LT1171, and ILIM = 0.833 (2 – DC) for the LT1172.
Note 5: Minimum input voltage for isolated flyback mode is 7V. VMAX = 55V
for HV grade in fully isolated mode to avoid switch breakdown.
相关PDF资料
PDF描述
LT1236CCN8-5#TRPBF 1-OUTPUT THREE TERM VOLTAGE REFERENCE, 5 V, PDIP8
LT1240-7Z 1-OUTPUT 500 W AC-DC REG PWR SUPPLY MODULE
LT1840-7Z 1-OUTPUT 500 W AC-DC REG PWR SUPPLY MODULE
LT1740-7Z 1-OUTPUT 500 W AC-DC REG PWR SUPPLY MODULE
LT1241MJ8 1 A SWITCHING CONTROLLER, 500 kHz SWITCHING FREQ-MAX, CDIP8
相关代理商/技术参数
参数描述
LT1171CTPBF 制造商:Linear Technology 功能描述:LT1171CTPBF
LT1171HV 制造商:LINER 制造商全称:Linear Technology 功能描述:100kHz, 5A, 2.5A and 1.25A High Efficiency Switching Regulators
LT1171HVC 制造商:LINER 制造商全称:Linear Technology 功能描述:100kHz, 5A, 2.5A and 1.25A High Efficiency Switching Regulators
LT1171HVCQ 功能描述:IC REG MULTI CONFIG ADJ D2PAK RoHS:否 类别:集成电路 (IC) >> PMIC - 稳压器 - DC DC 开关稳压器 系列:- 设计资源:Design Support Tool 标准包装:1 系列:- 类型:升压(升压) 输出类型:固定 输出数:1 输出电压:3V 输入电压:0.75 V ~ 2 V PWM 型:- 频率 - 开关:- 电流 - 输出:100mA 同步整流器:是 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:SOT-23-5 细型,TSOT-23-5 包装:剪切带 (CT) 供应商设备封装:TSOT-23-5 其它名称:AS1323-BTTT-30CT
LT1171HVCQ#PBF 功能描述:IC REG MULTI CONFIG ADJ D2PAK RoHS:是 类别:集成电路 (IC) >> PMIC - 稳压器 - DC DC 开关稳压器 系列:- 设计资源:Design Support Tool 标准包装:1 系列:- 类型:升压(升压) 输出类型:固定 输出数:1 输出电压:3V 输入电压:0.75 V ~ 2 V PWM 型:- 频率 - 开关:- 电流 - 输出:100mA 同步整流器:是 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:SOT-23-5 细型,TSOT-23-5 包装:剪切带 (CT) 供应商设备封装:TSOT-23-5 其它名称:AS1323-BTTT-30CT