参数资料
型号: LT1175IS8-5#TRPBF
厂商: Linear Technology
文件页数: 11/20页
文件大小: 0K
描述: IC REG LDO -5V .5A 8SOIC
产品培训模块: More Information on LDOs
标准包装: 2,500
稳压器拓扑结构: 负,固定式
输出电压: -5V
输入电压: 可下调至 -20V
电压 - 压降(标准): 0.5V @ 500mA
稳压器数量: 1
电流 - 输出: 500mA
电流 - 限制(最小): 可调式
工作温度: -40°C ~ 85°C
安装类型: 表面贴装
封装/外壳: 8-SOIC(0.154",3.90mm 宽)
供应商设备封装: 8-SOIC
包装: 带卷 (TR)
LT1175
APPLICATIONS INFORMATION
GND
LT1175
+
3.8V
R1
A1
C OUT
LOAD
ESR
R2
SENSE
Q2
AC
FEEDFORWARD
PATH
C F
20pF
OUTPUT
OUTPUT
R C
0.5Ω
NEGATIVE DC
FEEDBACK
PARASITIC
COLLECTOR
AT LIGHT
Q3
Q1
RESISTANCE
LOADS
R N
R LIM
POWER
TRANSISTOR
CURRENT LIMIT
V IN
Figure 3
SENSE RESISTOR
1175 F03
This condition can occur with ceramic or ?lm capacitors
which often have an ESR under 0.1Ω. With previous de-
signs, the user was forced to add a real resistor in series
with the capacitor to guarantee loop stability. The LT1175
uses a unique AC feedforward technique to eliminate
this problem. C F is a conventional feedforward capacitor
often used in regulators to cancel the pole formed by the
output capacitor. It would normally be connected from the
regulated output node to the feedback node at the R1/R2
junction or to an internal node on the ampli?er as shown.
In this case, however, the capacitor is connected to the
internal structure of the power transistor. R C is the unavoid-
able parasitic collector resistance of the power transistor.
Access to the node at the bottom of R C is available only
in monolithic structures where Kelvin connections can
be made to the NPN buried collector layer. The loop now
responds as if R C were in series with the output capacitor
and good loop stability is achieved even with extremely
low ESR in the output capacitor.
The end result of all this attention to loop stability is that
the output capacitor used with the LT1175 can range in
value from 0.1μF to hundreds of microfarads, with an ESR
from 0Ω to 10Ω. This range allows the use of ceramic,
solid tantalum, aluminum and ?lm capacitors over a wide
range of values.
The optimum output capacitor type for the LT1175 is
still solid tantalum, but there is considerable leeway in
selecting the exact unit. If large load current transients
are expected, larger capacitors with lower ESR may be
needed to control worst-case output variation during
transients. If transients are not an issue, the capacitor
can be chosen for small physical size, low price, etc.
Concerns about surge currents in tantalum capacitors are
not an issue for the output capacitor because the LT1175
limits inrush current to well below the level which can
cause capacitor damage. Surges caused by shorting the
regulator output are also not a problem because tantalum
1175ff
11
相关PDF资料
PDF描述
RMM43DTMD CONN EDGECARD 86POS R/A .156 SLD
LFXP10C-4F256I IC FPGA 9.7KLUTS 188I/O 256-BGA
RSM43DTMD CONN EDGECARD 86POS R/A .156 SLD
RGM43DTMD CONN EDGECARD 86POS R/A .156 SLD
ESA50DTMT-S664 CONN EDGECARD 100PS R/A .125 SLD
相关代理商/技术参数
参数描述
LT1175IS8-PBF 制造商:LINER 制造商全称:Linear Technology 功能描述:500mA Negative Low Dropout Micropower Regulator
LT1175IS8-TR 制造商:LINER 制造商全称:Linear Technology 功能描述:500mA Negative Low Dropout Micropower Regulator
LT1175IS8-TRPBF 制造商:LINER 制造商全称:Linear Technology 功能描述:500mA Negative Low Dropout Micropower Regulator
LT1175IST-5 功能描述:IC REG LDO -5V .5A SOT223-3 RoHS:否 类别:集成电路 (IC) >> PMIC - 稳压器 - 线性 系列:- 标准包装:1 系列:- 稳压器拓扑结构:正,固定式 输出电压:3V 输入电压:2.3 V ~ 5.5 V 电压 - 压降(标准):0.035V @ 150mA 稳压器数量:2 电流 - 输出:150mA 电流 - 限制(最小):300mA 工作温度:-40°C ~ 125°C 安装类型:表面贴装 封装/外壳:6-UFDFN 裸露焊盘,6-TMLF? 供应商设备封装:6-TMLF?(1.6x1.6) 包装:Digi-Reel® 产品目录页面:1104 (CN2011-ZH PDF) 其它名称:576-3018-6
LT1175IST-5#PBF 功能描述:IC REG LDO -5V .5A SOT223-3 RoHS:否 类别:集成电路 (IC) >> PMIC - 稳压器 - 线性 系列:- 标准包装:1 系列:- 稳压器拓扑结构:正,固定式 输出电压:8V 输入电压:10.5 V ~ 23 V 电压 - 压降(标准):1.7V @ 40mA 稳压器数量:1 电流 - 输出:100mA(最小值) 电流 - 限制(最小):- 工作温度:0°C ~ 125°C 安装类型:表面贴装 封装/外壳:8-SOIC(0.154",3.90mm 宽) 供应商设备封装:8-SOIC 包装:剪切带 (CT) 产品目录页面:1075 (CN2011-ZH PDF) 其它名称:296-24390-1