- 您现在的位置：买卖IC网 > PDF目录2154 > LT1226CS8#TRPBF (Linear Technology)IC OP-AMP HI-SPD LOW NOISE 8SOIC PDF资料下载
参数资料
| 型号： | LT1226CS8#TRPBF |
| 厂商： | Linear Technology |
| 文件页数： | 7/8页 |
| 文件大小： | 0K |
| 描述： | IC OP-AMP HI-SPD LOW NOISE 8SOIC |
| 标准包装： | 2,500 |
| 放大器类型： | 通用 |
| 电路数： | 1 |
| 转换速率： | 400 V/µs |
| 增益带宽积： | 1GHz |
| 电流 - 输入偏压： | 4µA |
| 电压 - 输入偏移： | 300µV |
| 电流 - 电源： | 7mA |
| 电流 - 输出 / 通道： | 40mA |
| 电压 - 电源，单路/双路(±)： | ±2.5 V ~ 15 V |
| 工作温度： | 0°C ~ 70°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 8-SOIC（0.154"，3.90mm 宽） |
| 供应商设备封装： | 8-SO |
| 包装： | 带卷 (TR) |
7
LT1226
U
S
A
O
PPLICATI
WU
U
I FOR ATIO
Compensation for Lower Closed-Loop Gains
frequency domain and in the transient response. The
photo of the small signal response with 1000pF load
shows 55% peaking. The large signal response with a
10,000pF load shows the output slew rate being limited by
the short circuit current.
AV = –25, CL = 1000pF
AV = +25, CL = 10,000pF
Lag Compensation
VOS Null Loop
U
S
A
O
PPLICATI
TYPICAL
The LT1226 can drive coaxial cable directly, but for best
pulse fidelity the cable should be doubly terminated with
a resistor in series with the output.
Compensation
The LT1226 has a typical gain bandwidth product of 1GHz
which allows it to have wide bandwidth in high gain
configurations (i.e., in a gain of 1000 it will have a
bandwidth of about 1MHz). The amplifier is stable in a
noise gain of 25 so the ratio of the output signal to the
inverting input must be 1/25 or less. Straightforward gain
configurations of +25 or –24 are stable, but there are a few
configurations that allow the amplifier to be stable for
lower signal gains (the noise gain, however, remains 25 or
more). One example is the inverting amplifier shown in the
typical applications sections below. The input signal has a
gain of –RF/RIN to the output, but it is easily seen that this
configuration is equivalent to a gain of –24 as far as the
amplifier is concerned. Lag compensation can also be
used to give a low frequency gain less than 25 with a high
frequency gain of 25 or greater. The example below has a
DC gain of 6, but an AC gain of +31. The break frequency
of the RC combination across the amplifier inputs should
be at least a factor of 10 less than the gain bandwidth of the
amplifier divided by the high frequency gain (in this case
1/10 of 1GHz/31 or 3MHz).
Cable Driving
–
+
200
LT1226
330pF
VIN
VOUT
5k
LT1226 TA03
AV = +6, f < 2MHz
1k
LT1226 TA04
R2
50
IN
V
OUT
V
R1
1.2k
R3
75
R4
75
75
CABLE
LT1226
+
–
+
RC
LT1226
VIN
VOUT
LT1226 TA05
RIN
RF
RIN
AV = –
; RF ≥ 24 × (RIN || RC)
VIN
VOUT
LT1226 TA06
–
+
LT1226
300k
1
8
10k
25k
25
100pF
LT1097
–
+
AV = 1001
LT1226 AI04
Information furnished by Linear Technology Corporation is believed to be accurate and reliable.
However, no responsibility is assumed for its use. Linear Technology Corporation makes no represen-
tation that the interconnection of circuits as described herein will not infringe on existing patent rights.
相关PDF资料 |
PDF描述 |
|---|---|
| LT1228IS8#TRPBF | IC CRNT FEEDBK AMP 100MHZ 8SOIC |
| LT1230CS#TRPBF | IC CURR FEEDBACK AMP QUAD 14SOIC |
| LT1259CS#TRPBF | IC AMP W/SHUTDOWN DUAL 14-SOIC |
| LT1351CMS8 | IC OP-AMP HI-SPEED 3MHZ 8-MSOP |
| LT1352IS8 | IC OP AMP DUAL HI SPD 3MHZ 8SOIC |
相关代理商/技术参数 |
参数描述 |
|---|---|
| LT1227 | 制造商:LINER 制造商全称:Linear Technology 功能描述:140MHz Video Current Feedback Amplifier |
| LT1227_06 | 制造商:LINER 制造商全称:Linear Technology 功能描述:140MHz Video Current Feedback Amplifier |
| LT1227C | 制造商:LINER 制造商全称:Linear Technology 功能描述:140MHz Video Current Feedback Amplifier |
| LT1227CN8 | 功能描述:IC VIDEO CURRNT FEEDBCK AMP 8DIP RoHS:否 类别:集成电路 (IC) >> 线性 - 放大器 - 视频放大器和频缓冲器 系列:- 标准包装:1,000 系列:- 应用:驱动器 输出类型:差分 电路数:3 -3db带宽:350MHz 转换速率:1000 V/µs 电流 - 电源:14.5mA 电流 - 输出 / 通道:60mA 电压 - 电源，单路/双路(±):5 V ~ 12 V，±2.5 V ~ 6 V 安装类型:表面贴装 封装/外壳:20-VFQFN 裸露焊盘 供应商设备封装:20-QFN 裸露焊盘（4x4） 包装:带卷 (TR) |
| LT1227CN8#PBF | 功能描述:IC VIDEO CURRNT FEEDBCK AMP 8DIP RoHS:是 类别:集成电路 (IC) >> 线性 - 放大器 - 视频放大器和频缓冲器 系列:- 产品培训模块:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 标准包装:50 系列:- 应用:TFT-LCD 面板：VCOM 驱动器 输出类型:满摆幅 电路数:1 -3db带宽:35MHz 转换速率:40 V/µs 电流 - 电源:3.7mA 电流 - 输出 / 通道:1.3A 电压 - 电源，单路/双路(±):9 V ~ 20 V，±4.5 V ~ 10 V 安装类型:表面贴装 封装/外壳:8-TSSOP，8-MSOP（0.118"，3.00mm 宽）裸露焊盘 供应商设备封装:8-uMax-EP 包装:管件 |
发布紧急采购，3分钟左右您将得到回复。