参数资料
型号: LT1228MJ8#TRPBF
厂商: LINEAR TECHNOLOGY CORP
元件分类: 音频/视频放大
英文描述: 1 CHANNEL, VIDEO AMPLIFIER, CDIP8
封装: 0.300 INCH, HERMETIC SEALED, LEAD FREE, CERAMIC, DIP-8
文件页数: 4/20页
文件大小: 401K
代理商: LT1228MJ8#TRPBF
12
LT1228
1228fc
the family of curves that result from various values of the
feedback resistor. These curves use a solid line when the
response has less than 0.5dB of peaking and a dashed line
for the response with 0.5dB to 5dB of peaking. The curves
stop where the response has more than 5dB of peaking.
Current Feedback Amp Small-Signal Response
VS = ±15V, RF = RG = 750, RL = 100
At a gain of two, on
±15V supplies with a 750 feedback
resistor, the bandwidth into a light load is over 160MHz
without peaking, but into a heavy load the bandwidth
reduces to 100MHz. The loading has so much effect
because there is a mild resonance in the output stage that
enhances the bandwidth at light loads but has its Q
reduced by the heavy load. This enhancement is only
useful at low gain settings, at a gain of ten it does not boost
the bandwidth. At unity gain, the enhancement is so
effective the value of the feedback resistor has very little
effect on the bandwidth. At very high closed-loop gains,
the bandwidth is limited by the gain-bandwidth product of
about 1GHz. The curves show that the bandwidth at a
closed-loop gain of 100 is 10MHz, only one tenth what it
is at a gain of two.
Capacitance on the Inverting Input
Current feedback amplifiers want resistive feedback from
the output to the inverting input for stable operation. Take
care to minimize the stray capacitance between the output
and the inverting input. Capacitance on the inverting input
to ground will cause peaking in the frequency response
(and overshoot in the transient response), but it does not
degrade the stability of the amplifier. The amount of
capacitance that is necessary to cause peaking is a func-
tion of the closed-loop gain taken. The higher the gain, the
more capacitance is required to cause peaking. For ex-
ample, in a gain of 100 application, the bandwidth can be
increased from 10MHz to 17MHz by adding a 2200pF
capacitor, as shown below. CG must have very low series
resistance, such as silver mica.
LT1228 TA08
+
CG
RG
5.1
RF
510
VOUT
CFA
VIN
6
1
8
Boosting Bandwidth of High Gain Amplifier
with Capacitance On Inverting Input
FREQUENCY (MHz)
1
19
GAIN
(dB)
22
25
28
31
46
49
10
100
LT1228 TA09
34
37
40
43
CG = 4700pF
CG = 2200pF
CG = 0
APPLICATIO S I FOR ATIO
WU
U
相关PDF资料
PDF描述
LT1228MJ8#TR 1 CHANNEL, VIDEO AMPLIFIER, CDIP8
LT1304CS8-3.3#PBF 1.2 A SWITCHING REGULATOR, 300 kHz SWITCHING FREQ-MAX, PDSO8
LT1304CS8-3.3#TRPBF 1.2 A SWITCHING REGULATOR, 300 kHz SWITCHING FREQ-MAX, PDSO8
LT1304CS8-3.3#TR 1.2 A SWITCHING REGULATOR, 300 kHz SWITCHING FREQ-MAX, PDSO8
LT1319CS#PBF INFRARED, RECEIVER IC, PDSO16
相关代理商/技术参数
参数描述
LT1229 制造商:LINER 制造商全称:Linear Technology 功能描述:Dual and Quad 100MHz Current Feedback Amplifiers
LT1229C 制造商:LINER 制造商全称:Linear Technology 功能描述:Dual and Quad 100MHz Current Feedback Amplifiers
LT1229CJ8 制造商:LINER 制造商全称:Linear Technology 功能描述:Dual and Quad 100MHz Current Feedback Amplifiers
LT1229CN8 功能描述:IC CURRNT FEEDBACK AMP DUAL 8DIP RoHS:否 类别:集成电路 (IC) >> Linear - Amplifiers - Instrumentation 系列:- 标准包装:73 系列:Over-The-Top® 放大器类型:通用 电路数:4 输出类型:满摆幅 转换速率:0.07 V/µs 增益带宽积:200kHz -3db带宽:- 电流 - 输入偏压:1nA 电压 - 输入偏移:285µV 电流 - 电源:50µA 电流 - 输出 / 通道:25mA 电压 - 电源,单路/双路(±):2 V ~ 44 V,±1 V ~ 22 V 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:16-WFDFN 裸露焊盘 供应商设备封装:16-DFN-EP(5x3) 包装:管件
LT1229CN8#PBF 功能描述:IC CURRNT FEEDBACK AMP DUAL 8DIP RoHS:是 类别:集成电路 (IC) >> Linear - Amplifiers - Instrumentation 系列:- 标准包装:2,500 系列:- 放大器类型:通用 电路数:4 输出类型:- 转换速率:0.6 V/µs 增益带宽积:1MHz -3db带宽:- 电流 - 输入偏压:45nA 电压 - 输入偏移:2000µV 电流 - 电源:1.4mA 电流 - 输出 / 通道:40mA 电压 - 电源,单路/双路(±):3 V ~ 32 V,±1.5 V ~ 16 V 工作温度:0°C ~ 70°C 安装类型:表面贴装 封装/外壳:14-TSSOP(0.173",4.40mm 宽) 供应商设备封装:14-TSSOP 包装:带卷 (TR) 其它名称:LM324ADTBR2G-NDLM324ADTBR2GOSTR