参数资料
| 型号： | LT1399IS |
| 厂商： | Linear Technology |
| 文件页数： | 5/16页 |
| 文件大小： | 0K |
| 描述： | IC CURRNT FEEDBK AMP TRPL 16SOIC |
| 标准包装： | 50 |
| 放大器类型： | 电流反馈 |
| 电路数： | 3 |
| 转换速率： | 800 V/µs |
| -3db带宽： | 300MHz |
| 电流 - 输入偏压： | 10µA |
| 电压 - 输入偏移： | 1500µV |
| 电流 - 电源： | 4.6mA |
| 电流 - 输出 / 通道： | 80mA |
| 电压 - 电源，单路/双路(±)： | 4 V ~ 12 V，±2 V ~ 6 V |
| 工作温度： | -40°C ~ 85°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 16-SOIC（0.154"，3.90mm 宽） |
| 供应商设备封装： | 16-SO |
| 包装： | 管件 |
13
LT1398/LT1399/LT1399HV
sn13989 13989fas
U
S
A
O
PPLICATI
WU
U
I FOR ATIO
The G input also arrives via 75
coax and adds its
contribution to the Y signal via a 549
resistor R9, which
is tied to the inverting input of amplifier A2. There is also
an 86.6
termination resistor R12, which yields a 75
termination when considered in parallel with R9. Using
superposition, it is straightforward to determine the
output of amplifier A2. Although inverted, it sums the R,
G and B signals in the standard proportions of 0.3R,
0.59G and 0.11B that are used to create the Y signal.
Amplifier B1 then inverts and amplifies the signal by 2,
resulting in the Y output.
Buffered Color-Difference to RGB Matrix
The LT1399 can be used to create buffered RGB outputs
from color-difference signals (Figure 9). The R output is
a back-terminated 75
signal created using resistor R5
and LT1399 amplifier A1 configured for a gain of +2 via
324
resistors R3 and R4. The noninverting input of
amplifier A1 is connected via 1k resistors R1 and R2 to
the Y and R-Y inputs respectively, resulting in cancella-
tion of the Y signal at the amplifier input. The remaining
R signal is then amplified by A1.
The B output is also a back-terminated 75
signal
created using resistor R16 and amplifier A3 configured
for a gain of +2 via 324
resistors R14 and R15. The
noninverting input of amplifier A3 is connected via 1k
resistors R12 and R13 to the Y and B-Y inputs respec-
tively, resulting in cancellation of the Y signal at the
amplifier input. The remaining B signal is then amplified
by A3.
The G output is the most complicated of the three. It is a
weighted sum of the Y, R-Y and B-Y inputs. The Y input
is attenuated via resistors R6 and R7 such that amplifier
A2’s noninverting input sees 0.83Y. Using superposition,
we can calculate the positive gain of A2 by assuming that
R8 and R9 are grounded. This results in a gain of 2.41 and
a contribution at the output of A2 of 2Y. The R-Y input is
amplified by A2 with the gain set by resistors R8 and R10,
giving an amplification of –1.02. This results in a contri-
bution at the output of A2 of 1.02Y – 1.02R. The B-Y input
is amplified by A2 with the gain set by resistors R9 and
R10, giving an amplification of – 0.37. This results in a
contribution at the output of A2 of 0.37Y – 0.37B.
If we now sum the three contributions at the output of A2,
we get:
A2OUT = 3.40Y – 1.02R – 0.37B
It is important to remember though that Y is a weighted
sum of R, G and B such that:
Y = 0.3R + 0.59G + 0.11B
If we substitute for Y at the output of A2 we then get:
A2OUT = (1.02R – 1.02R) + 2G + (0.37B – 0.37B)
= 2G
The back-termination resistor R11 then halves the output
of A2 resulting in the G output.
–
+
A2
1/3 LT1399
R7
1k
B-Y
R-Y
Y
R10
324
R11
75
R6
205
R2
1k
R1
1k
R8
316
R9
845
–
+
A3
1/3 LT1399
R14
324
B
G
R16
75
R12
1k
R13
1k
R15
324
ALL RESISTORS 1%
VS = ± 5V
–
+
A1
1/3 LT1399
R3
324
R
R5
75
R4
324
1398/99 F09
Figure 9. Buffered Color-Difference to RGB Matrix
相关PDF资料 |
PDF描述 |
|---|---|
| MAX4203EUA+ | IC BUFFER OPEN LOOP 8-UMAX |
| MMS-126-02-T-DH | CONN RCPT 2MM 52POS DL HORZ SMD |
| MMS-127-02-T-DH | CONN RCPT 2MM 54POS DL HORZ SMD |
| RMCF0805FT274K | RES 274K OHM 1/8W 1% 0805 SMD |
| 9-146253-0-27 | CONN HDR BRKWAY .100 54POS VERT |
相关代理商/技术参数 |
参数描述 |
|---|---|
| LT1399IS#PBF | 功能描述:IC CURRNT FEEDBK AMP TRPL 16SOIC RoHS:是 类别:集成电路 (IC) >> Linear - Amplifiers - Instrumentation 系列:- 标准包装:100 系列:- 放大器类型:通用 电路数:1 输出类型:- 转换速率:0.2 V/µs 增益带宽积:- -3db带宽:- 电流 - 输入偏压:100pA 电压 - 输入偏移:30µV 电流 - 电源:380µA 电流 - 输出 / 通道:- 电压 - 电源，单路/双路(±):±2 V ~ 18 V 工作温度:0°C ~ 70°C 安装类型:表面贴装 封装/外壳:8-SOIC（0.154"，3.90mm 宽） 供应商设备封装:8-SO 包装:管件 |
| LT1399IS#TR | 功能描述:IC CURRNT FEEDBK AMP TRPL 16SOIC RoHS:否 类别:集成电路 (IC) >> Linear - Amplifiers - Instrumentation 系列:- 标准包装:100 系列:- 放大器类型:通用 电路数:1 输出类型:- 转换速率:0.2 V/µs 增益带宽积:- -3db带宽:- 电流 - 输入偏压:100pA 电压 - 输入偏移:30µV 电流 - 电源:380µA 电流 - 输出 / 通道:- 电压 - 电源，单路/双路(±):±2 V ~ 18 V 工作温度:0°C ~ 70°C 安装类型:表面贴装 封装/外壳:8-SOIC（0.154"，3.90mm 宽） 供应商设备封装:8-SO 包装:管件 |
| LT1399IS#TRPBF | 功能描述:IC CURRNT FEEDBK AMP TRPL 16SOIC RoHS:是 类别:集成电路 (IC) >> Linear - Amplifiers - Instrumentation 系列:- 标准包装:100 系列:- 放大器类型:通用 电路数:1 输出类型:- 转换速率:0.2 V/µs 增益带宽积:- -3db带宽:- 电流 - 输入偏压:100pA 电压 - 输入偏移:30µV 电流 - 电源:380µA 电流 - 输出 / 通道:- 电压 - 电源，单路/双路(±):±2 V ~ 18 V 工作温度:0°C ~ 70°C 安装类型:表面贴装 封装/外壳:8-SOIC（0.154"，3.90mm 宽） 供应商设备封装:8-SO 包装:管件 |
| LT13AG2831 | 制造商:Laird Technologies Inc 功能描述:CLO,STR,BF,DLN,CTL / .070X.210X.200X11.970IN / UOM=EA |
| LT13AG3211 | 制造商:Laird Technologies Inc 功能描述: |
发布紧急采购，3分钟左右您将得到回复。