- 您现在的位置：买卖IC网 > PDF目录377707 > LT1573I (Linear Technology Corporation) Low Dropout PNP Regulator Driver PDF资料下载
参数资料
| 型号： | LT1573I |
| 厂商： | Linear Technology Corporation |
| 英文描述： | Low Dropout PNP Regulator Driver |
| 中文描述： | 低压差稳压器驱动进步党 |
| 文件页数： | 7/16页 |
| 文件大小： | 200K |
| 代理商： | LT1573I |
7
LT1573
Figure 2. Basic Regulator Circuit
on the regulator circuit under overload conditions. The
resistor R
D
is chosen based on the operating requirements
of the circuit, primarily the dropout voltage and the output
current. The dropout voltage of an LT1573-based regula-
tor circuit is determined by the V
CE
saturation voltage of
the discrete external PNP transistor when it is driven with
a base current equal to the available drive current of the
LT1573.
External PNP Transistor Selection Criteria
The selection of an appropriate external PNP transistor
depends on the regulator application specifications. The
critical PNP transistor selection criteria include:
1. The maximum output current of the PNP transistor
2. The dropout voltage at the maximum output current
3. The gain-bandwidth product f
T
of the transistor
The PNP transistor must be able to supply the specified
maximum regulator output current to be qualified for the
regulator application. The V
CE
saturation voltage of the
transistor at the maximum output current determines the
dropout voltage of the circuit. The dropout voltage deter-
mines the minimum regulator input voltage for a certain
specified output voltage. The gain-bandwidth product f
T
of the transistor determines how fast the voltage regulator
can follow an output load change without losing voltage
regulation.
The D45H11 from Motorola and the KSE45H11TU from
Samsung can be used in all LT1573 regulator circuits with
current ratings up to 5A. The D45H11 can supply 5A of
COMP
V
OUT
V
IN
DRIVE
FB
LATCH
SHDN
GND
LT1573
+
C
TIME
C
OUT2
C
OUT1
C
C
V
IN
R
C
R
D
V
OUT
GND
1573 F02
R
B
R1
R2
LOAD
+
+
Q
OUT
C
IN
The LT1573 is designed to be used in conjunction with an
external PNP transistor. The overall specifications of a
regulator circuit using the LT1573 and an external PNP will
be heavily dependent on the specifications of the external
PNP. While there are a wide variety of PNP transistors
available that can be used with the LT1573, the specifica-
tions given in a typical transistor data sheet are of little use
in determining overall circuit performance. In the follow-
ing discussion the critical requirements of the PNP tran-
sistors are noted. Design equations are given and
examples are shown using a readily available discrete PNP
transistor. This device is inexpensive, available from mul-
tiple sources and can be used for a wide range of applica-
tions. For applications using other PNP transistors, the
regulator specifications can be derived by the same method.
Basic Regulator Circuit
The basic regulator circuit is shown in Figure 2. The
adjustable output LT1573 senses the regulator output
voltage from its feedback pin via the output voltage
divider, R1 and R2, and drives the base of the external PNP
transistor to maintain the regulator output at the desired
value. For fixed output versions of the LT1573, the regu-
lator output voltage is sensed from the feedback pin via an
internal voltage divider. The resistor R
D
is required for the
overcurrent latch-off function. R
D
is also used to limit the
drive current available to the external PNP transistor and
to limit the power dissipation in the LT1573. Limiting the
drive current to the external PNP transistor will limit the
output current of the regulator which minimizes the stress
APPLICATIOU
W
U
U
相关PDF资料 |
PDF描述 |
|---|---|
| LT1573IS8 | Low Dropout PNP Regulator Driver |
| LT1573 | Low Dropout PNP Regulator Driver(低压差PNP稳压驱动器) |
| LT1575CN8 | CAP ELECT 330UF 25V HC SMD |
| LT1575CS8-1.5 | Cap-Free, NMOS, 150mA Low Dropout Regulator with Reverse Current Protection |
| LT1575CN8-1.5 | Cap-Free, NMOS, 150mA Low Dropout Regulator with Reverse Current Protection |
相关代理商/技术参数 |
参数描述 |
|---|---|
| LT1573IS8 | 功能描述:IC REG CTRLR SGL POS ADJ 8-SOIC RoHS:否 类别:集成电路 (IC) >> PMIC - 稳压器 - 线性晶体管驱动器 系列:- 产品培训模块:More Information on LDOs 标准包装:2,500 系列:- 类型:正，固定式 输出数:2 输出电压:2.8V，3.3V 电流 - 电源:12mA 输入电压:5 V ~ 22 V 工作温度:0°C ~ 70°C 封装/外壳:16-SOIC（0.154"，3.90mm 宽） 供应商设备封装:16-SOIC 包装:带卷 (TR) |
| LT1573IS8#PBF | 功能描述:IC REG CTRLR SGL POS ADJ 8-SOIC RoHS:是 类别:集成电路 (IC) >> PMIC - 稳压器 - 线性晶体管驱动器 系列:- 产品培训模块:More Information on LDOs 标准包装:2,500 系列:- 类型:正，固定式 输出数:2 输出电压:2.8V，3.3V 电流 - 电源:12mA 输入电压:5 V ~ 22 V 工作温度:0°C ~ 70°C 封装/外壳:16-SOIC（0.154"，3.90mm 宽） 供应商设备封装:16-SOIC 包装:带卷 (TR) |
| LT1573IS8#TR | 功能描述:IC REG CTRLR SGL POS ADJ 8SOIC RoHS:否 类别:集成电路 (IC) >> PMIC - 稳压器 - 线性晶体管驱动器 系列:- 产品培训模块:More Information on LDOs 标准包装:2,500 系列:- 类型:正，固定式 输出数:2 输出电压:2.8V，3.3V 电流 - 电源:12mA 输入电压:5 V ~ 22 V 工作温度:0°C ~ 70°C 封装/外壳:16-SOIC（0.154"，3.90mm 宽） 供应商设备封装:16-SOIC 包装:带卷 (TR) |
| LT1573IS8#TRPBF | 功能描述:IC REG CTRLR SGL POS ADJ 8-SOIC RoHS:是 类别:集成电路 (IC) >> PMIC - 稳压器 - 线性晶体管驱动器 系列:- 产品培训模块:More Information on LDOs 标准包装:2,500 系列:- 类型:正，固定式 输出数:2 输出电压:2.8V，3.3V 电流 - 电源:12mA 输入电压:5 V ~ 22 V 工作温度:0°C ~ 70°C 封装/外壳:16-SOIC（0.154"，3.90mm 宽） 供应商设备封装:16-SOIC 包装:带卷 (TR) |
| LT1575 | 制造商:LINER 制造商全称:Linear Technology 功能描述:Ultrafast Transient Response, Low Dropout Regulators Adjustable and Fixed |
发布紧急采购，3分钟左右您将得到回复。