- 您现在的位置：买卖IC网 > PDF目录14190 > LT1617ES5#TRM (Linear Technology)IC REG INV ADJ 0.35A TSOT23-5 PDF资料下载
参数资料
| 型号： | LT1617ES5#TRM |
| 厂商： | Linear Technology |
| 文件页数： | 6/8页 |
| 文件大小： | 0K |
| 描述： | IC REG INV ADJ 0.35A TSOT23-5 |
| 标准包装： | 500 |
| 类型： | 反相 |
| 输出类型： | 可调式 |
| 输出数： | 1 |
| 输出电压： | 可调至 -34V |
| 输入电压： | 1.2 V ~ 15 V |
| 电流 - 输出： | 350mA |
| 同步整流器： | 无 |
| 工作温度： | -40°C ~ 85°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | SOT-23-5 细型，TSOT-23-5 |
| 包装： | 带卷 (TR) |
| 供应商设备封装： | TSOT-23-5 |
| 其它名称： | LT1617ES5 LT1617ES5-ND |
LT1617/LT1617-1
APPLICATIO S I FOR ATIO
tor values are used. This overshoot can be beneficial as it
helps increase the amount of available output current for
smaller inductor values. This will be the peak current seen
by the inductor (and the diode) during normal operation.
For designs using small inductance values (especially at
input voltages greater than 5V), the current limit over-
shoot can be quite high. Although it is internally current
limited to 350mA, the power switch of the LT1617 can
handle larger currents without problem, but the overall
efficiency will suffer. Best results will be obtained when
I PEAK is kept below 700mA for the LT1617 and below
400mA for the LT1617-1.
Capacitor Selection
Low ESR (Equivalent Series Resistance) capacitors should
be used at the output to minimize the output ripple voltage.
Multilayer ceramic capacitors are the best choice, as they
have a very low ESR and are available in very small
packages. Their small size makes them a good companion
to the LT1617’s SOT-23 package. Solid tantalum capaci-
tors (like the AVX TPS, Sprague 593D families) or OS-CON
capacitors can be used, but they will occupy more board
area than a ceramic and will have a larger ESR. Always use
a capacitor with a sufficient voltage rating.
Ceramic capacitors also make a good choice for the input
decoupling capacitor, which should be placed as close as
possible to the LT1617. A 4.7 μ F input capacitor is suffi-
Diode Selection
For most LT1617 applications, the Motorola MBR0520
surface mount Schottky diode (0.5A, 20V) is an ideal
choice. Schottky diodes, with their low forward voltage
drop and fast switching speed, are the best match for the
LT1617. For higher output voltage applications the 30V
MBR0530 can be used. Many different manufacturers
make equivalent parts, but make sure that the component
is rated to handle at least 0.5A. For LT1617-1 applications,
a Phillips BAT54 or a Central Semiconductor CMDSH-3
works well.
Lowering Output Voltage Ripple
Using low ESR capacitors will help minimize the output
ripple voltage, but proper selection of the inductor and the
output capacitor also plays a big role. The LT1617 pro-
vides energy to the load in bursts by ramping up the
inductor current, then delivering that current to the load.
If too large of an inductor value or too small of a capacitor
value is used, the output ripple voltage will increase
because the capacitor will be slightly overcharged each
burst cycle. To reduce the output ripple, increase the
output capacitor value or add a 100pF feed-forward ca-
pacitor in the feedback network of the LT1617 (see the
circuits in the Typical Applications section). Adding this
small, inexpensive 100pF capacitor will greatly reduce the
output voltage ripple.
cient for most applications. Table 2 shows a list of several
capacitor manufacturers. Consult the manufacturers for
more detailed information and for their entire selection of
related parts.
Table 2. Recommended Capacitors
CAPACITOR TYPE
Ceramic
Ceramic
Ceramic
VENDOR
Taiyo Yuden
(408) 573-4150
www.t-yuden.com
AVX
(803) 448-9411
www.avxcorp.com
Murata
(714) 852-2001
www.murata.com
6
相关PDF资料 |
PDF描述 |
|---|---|
| MAX6865UK44D3L+T | IC MPU SUPERVISOR SOT23-5 |
| VI-J5H-CZ-F2 | CONVERTER MOD DC/DC 52V 25W |
| MAX6865UK44D2L+T | IC MPU SUPERVISOR SOT23-5 |
| MAX6865UK42D3L+T | IC MPU SUPERVISOR SOT23-5 |
| ESC26DRTH-S13 | CONN EDGECARD 52POS .100 EXTEND |
相关代理商/技术参数 |
参数描述 |
|---|---|
| LT1617ES5TRMPBF | 制造商:Linear Technology 功能描述:DC-DC Conv.Micropower Inverting TSOT23-5 |
| LT1618 | 制造商:LINER 制造商全称:Linear Technology 功能描述:Constant-Current/Constant-Voltage 1.4MHz Step-Up DC/DC Converter |
| LT1618_1 | 制造商:LINER 制造商全称:Linear Technology 功能描述:Constant-Current/Constant-Voltage 1.4MHz Step-Up DC/DC Converter |
| LT1618EDD | 功能描述:IC REG BOOST ADJ 1.5A 10DFN RoHS:否 类别:集成电路 (IC) >> PMIC - 稳压器 - DC DC 开关稳压器 系列:- 标准包装:500 系列:- 类型:切换式电容器（充电泵），反相 输出类型:固定 输出数:1 输出电压:-3V 输入电压:2.3 V ~ 5.5 V PWM 型:Burst Mode? 频率 - 开关:900kHz 电流 - 输出:100mA 同步整流器:无 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:SOT-23-6 细型，TSOT-23-6 包装:带卷 (TR) 供应商设备封装:TSOT-23-6 其它名称:LTC1983ES6-3#TRMTR |
| LT1618EDD#PBF | 功能描述:IC REG BOOST ADJ 1.5A 10DFN RoHS:是 类别:集成电路 (IC) >> PMIC - 稳压器 - DC DC 开关稳压器 系列:- 标准包装:250 系列:- 类型:降压（降压） 输出类型:固定 输出数:1 输出电压:1.2V 输入电压:2.05 V ~ 6 V PWM 型:电压模式 频率 - 开关:2MHz 电流 - 输出:500mA 同步整流器:是 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:6-UFDFN 包装:带卷 (TR) 供应商设备封装:6-SON（1.45x1） 产品目录页面:1032 (CN2011-ZH PDF) 其它名称:296-25628-2 |
发布紧急采购，3分钟左右您将得到回复。