- 您现在的位置：买卖IC网 > PDF目录2155 > LT1636IDD#TRPBF (Linear Technology)IC OP AMP SGL R-R IN/OUT 8-DFN PDF资料下载
参数资料
| 型号： | LT1636IDD#TRPBF |
| 厂商： | Linear Technology |
| 文件页数： | 2/16页 |
| 文件大小： | 0K |
| 描述： | IC OP AMP SGL R-R IN/OUT 8-DFN |
| 标准包装： | 2,500 |
| 系列： | Over-The-Top® |
| 放大器类型： | 通用 |
| 电路数： | 1 |
| 输出类型： | 满摆幅 |
| 转换速率： | 0.075 V/µs |
| 增益带宽积： | 220kHz |
| 电流 - 输入偏压： | 4nA |
| 电压 - 输入偏移： | 125µV |
| 电流 - 电源： | 50µA |
| 电流 - 输出 / 通道： | 30mA |
| 电压 - 电源，单路/双路(±)： | 2.7 V ~ 44 V，±1.35 V ~ 22 V |
| 工作温度： | -40°C ~ 85°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 8-WFDFN 裸露焊盘 |
| 供应商设备封装： | 8-DFN-EP（3x3） |
| 包装： | 带卷 (TR) |
10
LT1636
1636fc
TYPICAL PERFOR A CE CHARACTERISTICS
UW
CHANGE
IN
INPUT
OFFSET
VOLTAGE
(100
V/DIV)
Open-Loop Gain
0V
10V
OUTPUT VOLTAGE (5V/DIV)
A
B
C
1636 G24
VS = ±15V
AV = –1
1636 G25
A: RL = 2k
B: RL = 10k
C: RL = 50k
Large-Signal Response
VS = ±15V
AV = 1
1636 G26
Small-Signal Response
APPLICATIONS INFORMATION
WU
U
cause the voltage at which operation switches from the
PNP stage to the NPN stage to move towards V+. The input
offset voltage of the NPN stage is untrimmed and is
typically 600
V.
A Schottky diode in the collector of each NPN transistor of
the NPN input stage allows the LT1636 to operate with
either or both of its inputs above V+. At about 0.3V above
V+ the NPN input transistor is fully saturated and the input
bias current is typically 3
A at room temperature. The
input offset voltage is typically 600
V when operating
above V+. The LT1636 will operate with its input 44V above
V– regardless of V+.
The inputs are protected against excursions as much as
22V below V – by an internal 1k resistor in series with each
input and a diode from the input to the negative supply.
There is no output phase reversal for inputs up to 5V below
V –. There are no clamping diodes between the inputs and
the maximum differential input voltage is 44V.
Output
The output voltage swing of the LT1636 is affected by in-
put overdrive as shown in the typical performance curves.
When monitoring voltages within 100mV of V+, gain
should be taken to keep the output from clipping.
The output of the LT1636 can be pulled up to 27V beyond
V+ with less than 1nA of leakage current, provided that V+
is less than 0.5V.
Supply Voltage
The positive supply pin of the LT1636 should be bypassed
with a small capacitor (about 0.01
F) within an inch of the
pin. When driving heavy loads an additional 4.7
F electro-
lytic capacitor should be used. When using split supplies,
the same is true for the negative supply pin.
The LT1636 is protected against reverse battery voltages
up to 27V. In the event a reverse battery condition occurs,
the supply current is less than 1nA.
When operating the LT1636 on total supplies of 20V or
more, the supply must not be brought up faster than 1
s.
This is especially true if low ESR bypass capacitors are
used. A series RLC circuit is formed from the supply lead
inductance and the bypass capacitor. 5
of resistance in
the supply or the bypass capacitor will dampen the tuned
circuit enough to limit the rise time.
Inputs
The LT1636 has two input stages, NPN and PNP (see
Simplified Schematic), resulting in three distinct operat-
ing regions as shown in the Input Bias Current vs Common
Mode typical performance curve.
For input voltages about 0.8V or more below V+, the PNP
input stage is active and the input bias current is typically
– 4nA. When the input voltage is about 0.5V or less from
V+, the NPN input stage is operating and the input bias
current is typically 10nA. Increases in temperature will
A
B
–10V
VS = ±15V
相关PDF资料 |
PDF描述 |
|---|---|
| LT1638CDD | IC OPAMP R-R IN/OUT DUAL 8DFN |
| LT1677IS8#PBF | IC OPAMP R-R I/O SGL LN 8SOIC |
| LT1678IS8 | IC OPAMP R-R I/O DUAL LN 8SOIC |
| LT1724CS#TRPBF | IC PREC OPAMP 200MHZ QUAD 14SOIC |
| LT1782HS6#TRMPBF | IC OPAMP R-R IN/OUT SOT23-6 |
相关代理商/技术参数 |
参数描述 |
|---|---|
| LT1636IMS8 | 制造商:Linear Technology 功能描述:OP Amp Single GP R-R I/O ±22V/44V 8-Pin MSOP |
| LT1636IMS8#PBF | 功能描述:IC OPAMP R-R IN/OUT 220KHZ 8MSOP RoHS:是 类别:集成电路 (IC) >> Linear - Amplifiers - Instrumentation 系列:Over-The-Top® 产品培训模块:Differential Circuit Design Techniques for Communication Applications 标准包装:1 系列:- 放大器类型:RF/IF 差分 电路数:1 输出类型:差分 转换速率:9800 V/µs 增益带宽积:- -3db带宽:2.9GHz 电流 - 输入偏压:3µA 电压 - 输入偏移:- 电流 - 电源:40mA 电流 - 输出 / 通道:- 电压 - 电源，单路/双路(±):3 V ~ 3.6 V 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:16-VQFN 裸露焊盘，CSP 供应商设备封装:16-LFCSP-VQ 包装:剪切带 (CT) 产品目录页面:551 (CN2011-ZH PDF) 其它名称:ADL5561ACPZ-R7CT |
| LT1636IMS8#TRPBF | 功能描述:IC OPAMP R-R IN/OUT 220KHZ 8MSOP RoHS:是 类别:集成电路 (IC) >> Linear - Amplifiers - Instrumentation 系列:Over-The-Top® 标准包装:50 系列:- 放大器类型:通用 电路数:2 输出类型:满摆幅 转换速率:1.8 V/µs 增益带宽积:6.5MHz -3db带宽:4.5MHz 电流 - 输入偏压:5nA 电压 - 输入偏移:100µV 电流 - 电源:65µA 电流 - 输出 / 通道:35mA 电压 - 电源，单路/双路(±):1.8 V ~ 5.25 V，±0.9 V ~ 2.625 V 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:10-TFSOP，10-MSOP（0.118"，3.00mm 宽） 供应商设备封装:10-MSOP 包装:管件 |
| LT1636IN8 | 功能描述:IC OPAMP R-R IN/OUT 220KHZ 8-DIP RoHS:否 类别:集成电路 (IC) >> Linear - Amplifiers - Instrumentation 系列:Over-The-Top® 标准包装:1,000 系列:- 放大器类型:电压反馈 电路数:4 输出类型:满摆幅 转换速率:33 V/µs 增益带宽积:20MHz -3db带宽:30MHz 电流 - 输入偏压:2nA 电压 - 输入偏移:3000µV 电流 - 电源:2.5mA 电流 - 输出 / 通道:30mA 电压 - 电源，单路/双路(±):4.5 V ~ 16.5 V，±2.25 V ~ 8.25 V 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:14-SOIC（0.154"，3.90mm 宽） 供应商设备封装:14-SOIC 包装:带卷 (TR) |
| LT1636IN8#PBF | 功能描述:IC OPAMP R-R IN/OUT 220KHZ 8-DIP RoHS:是 类别:集成电路 (IC) >> Linear - Amplifiers - Instrumentation 系列:Over-The-Top® 标准包装:1,000 系列:- 放大器类型:电压反馈 电路数:4 输出类型:满摆幅 转换速率:33 V/µs 增益带宽积:20MHz -3db带宽:30MHz 电流 - 输入偏压:2nA 电压 - 输入偏移:3000µV 电流 - 电源:2.5mA 电流 - 输出 / 通道:30mA 电压 - 电源，单路/双路(±):4.5 V ~ 16.5 V，±2.25 V ~ 8.25 V 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:14-SOIC（0.154"，3.90mm 宽） 供应商设备封装:14-SOIC 包装:带卷 (TR) |
发布紧急采购，3分钟左右您将得到回复。