- 您现在的位置：买卖IC网 > PDF目录10601 > LT1675CGN (Linear Technology)IC MUX RGB HISPEED TRIPLE 16SSOP PDF资料下载
参数资料
| 型号： | LT1675CGN |
| 厂商： | Linear Technology |
| 文件页数： | 15/16页 |
| 文件大小： | 0K |
| 描述： | IC MUX RGB HISPEED TRIPLE 16SSOP |
| 标准包装： | 100 |
| 类型： | 多路复用器 |
| 应用： | 驱动器，处理，切换 |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 16-SSOP（0.154"，3.90mm 宽） |
| 供应商设备封装： | 16-SSOP |
| 包装： | 管件 |
8
LT1675/LT1675-1
16751fb
PIN FUNCTIONS
UU
U
SELECT (Pin 10): Channel Select. Use this pin to select
between RGB1 inputs and RGB2 inputs. Use this pin for
fast toggling. HIGH Selects RGB1.
V – (Pins 11, 12): Negative Power Supply. Connect these
pins to – 5V and bypass with a good tantalum capacitor
(4.7
F). The pin may also require a 0.1F or 0.01F
depending on layout.
VOUTBLUE (Pin13): Blue Output. It is twice BLUE 1 or BLUE
2 depending on which channel is selected by Pin 10. VOUT
BLUE drives 50 or 75 double-terminated cables. Do not
add capacitance to this pin.
VOUT GREEN (Pin14): Green Output. It is twice GREEN 1 or
GREEN 2 depending on which channel is selected by Pin
10. VOUT GREEN drives 50 or 75 double-terminated
cables. Do not add capacitance to this pin.
VOUT RED (Pin 15): Red Output. It is twice RED 1 or RED 2
depending on which channel is selected by Pin 10. VOUT
RED drives 50 or 75 double-terminated cables. Do not
add capacitance to this pin.
V + (Pin 16): Positive Power Supply. Connect this pin to 5V
and bypass with a good tantalum capacitor (4.7
F). The
pin may also require a 0.1
F or 0.01F depending on
layout.
VOUT (Pin 6): It is twice VIN1 or VIN2 depending on which
channel is selected by Pin 5. VOUT drives 50 or 75
double-terminated cables. Do not add capacitance to this
pin.
ENABLE (Pin 7): Ground this pin for normal operation.
Take this pin to within 300mV of V+, or open to shut down
the part. This pin is also used for router applications. When
the part is disabled, the supply current is 0.3
A.
V + (Pin 8): Connect this pin to 5V and bypass with a good
tantalum capacitor (4.7
F). The pin may also require a
0.1
F or 0.01F depending on layout.
LT1675-1
VIN1 (Pin 1): The 1V video input signal to be switched is
applied to this pin. If 2V is applied to this pin, VOUT will clip.
The input must be terminated.
GND (Pin 2): Signal Ground. Connect to ground plane.
VIN2 (Pin 3): The 1V video input signal to be switched is
applied to this pin. If 2V is applied to this pin, VOUT will clip.
The input must be terminated.
V – (Pin 4): Connect this pin to – 5V and bypass with good
tantalum capacitor (4.7
F). The pin may also require a
0.1
F or 0.01F depending on layout.
SELECT (Pin 5): Use this pin to select VIN1 or VIN2. Use this
pin for fast toggling. HIGH Selects VIN1.
LT1675
RED 1 (Pin 1): Red 1 Input. The 1V video input signal to be
switched is applied to this pin. If 2V is applied to this pin,
VOUT RED will clip. The input must be terminated.
GREEN 1 (Pin 2): Green 1 Input. The 1V video input signal
to be switched is applied to this pin. If 2V is applied to this
pin, VOUT GREEN will clip. The input must be terminated.
BLUE 1 (Pin 3): Blue 1 Input. The 1V video input signal to
be switched is applied to this pin. If 2V is applied to this pin,
VOUT BLUE will clip. The input must be terminated.
GND (Pins 4, 5): Signal Ground. Connect to ground plane.
RED 2 (Pin 6): Red 2 Input. The 1V video input signal to be
switched is applied to this pin. If 2V is applied to this pin,
VOUT RED will clip. The input must be terminated.
GREEN 2 (Pin 7): Green 2 Input. The 1V video input signal
to be switched is applied to this pin. If 2V is applied to this
pin, VOUT GREEN will clip. The input must be terminated.
BLUE 2 (Pin 8): Blue 2 Input. The 1V video input signal to
be switched is applied to this pin. If 2V is applied to this pin,
VOUT BLUE will clip. The input must be terminated.
ENABLE (Pin 9): Chip Enable. Ground this pin for normal
operation. Take this pin to within 300mV of V+, or open to
shut down the part. This pin is also used for router
applications. When the part is disabled, the supply current
is 1
A.
相关PDF资料 |
PDF描述 |
|---|---|
| VI-J0Z-MY-F1 | CONVERTER MOD DC/DC 2V 20W |
| VI-J0N-MY-F1 | CONVERTER MOD DC/DC 18.5V 50W |
| VI-J0M-MY-F4 | CONVERTER MOD DC/DC 10V 50W |
| R3MZ | CONN PLUG AUDIO 3POS R/A MALE |
| ADV7523ABCBZ-P-1RL | IC TX HDMI/DVI LP |
相关代理商/技术参数 |
参数描述 |
|---|---|
| LT1675CGN#PBF | 功能描述:IC MUX RGB HISPEED TRIPLE 16SSOP RoHS:是 类别:集成电路 (IC) >> 线性 - 视频处理 系列:- 标准包装:250 系列:- 类型:电平移位器 应用:LCD 电视机/监控器 安装类型:表面贴装 封装/外壳:28-WFQFN 裸露焊盘 供应商设备封装:28-WQFN（4x4）裸露焊盘 包装:带卷 (TR) 其它名称:296-32523-2TPS65198RUYT-ND |
| LT1675CGN#TR | 功能描述:IC MUX RGB TRIPLE 250MHZ 16SSOP RoHS:否 类别:集成电路 (IC) >> 线性 - 视频处理 系列:- 产品变化通告:Product Discontinuation 07/Mar/2011 标准包装:3,000 系列:OMNITUNE™ 类型:调谐器 应用:移动电话，手机，视频显示器 安装类型:表面贴装 封装/外壳:65-WFBGA 供应商设备封装:PG-WFSGA-65 包装:带卷 (TR) 其它名称:SP000365064 |
| LT1675CGN#TRPBF | 功能描述:IC MUX RGB HISPEED TRIPLE 16SSOP RoHS:是 类别:集成电路 (IC) >> 线性 - 视频处理 系列:- 产品变化通告:Product Discontinuation 07/Mar/2011 标准包装:3,000 系列:OMNITUNE™ 类型:调谐器 应用:移动电话，手机，视频显示器 安装类型:表面贴装 封装/外壳:65-WFBGA 供应商设备封装:PG-WFSGA-65 包装:带卷 (TR) 其它名称:SP000365064 |
| LT1675CGNPBF | 制造商:Linear Technology 功能描述:RGB Multiplexer/Amp Triple 250MHz SSOP16 |
| LT1675CMS8-1 | 功能描述:IC MUX RGB SGL HS W/CFA 8-MSOP RoHS:否 类别:集成电路 (IC) >> 线性 - 视频处理 系列:- 产品变化通告:Product Discontinuation 07/Mar/2011 标准包装:3,000 系列:OMNITUNE™ 类型:调谐器 应用:移动电话，手机，视频显示器 安装类型:表面贴装 封装/外壳:65-WFBGA 供应商设备封装:PG-WFSGA-65 包装:带卷 (TR) 其它名称:SP000365064 |
发布紧急采购，3分钟左右您将得到回复。