参数资料
型号: LT1702-7D
厂商: POWER-ONE INC
元件分类: 电源模块
英文描述: 1-OUTPUT 550 W AC-DC REG PWR SUPPLY MODULE
封装: CASE T01, MODULE
文件页数: 7/33页
文件大小: 838K
代理商: LT1702-7D
Rugged Environment
AC-DC Converters >100 Watt
T Series
Edition 4/4.99
15/33
MELCHER
The Power Partners.
Temperature Sensors
The active T temperature sensors are of robust construc-
tion, mounted into a sealed aluminium tube of 12 mm outer
diameter and 50 mm length. The sensors are water proof
(IP 66) and high voltage tested with 1.4 kV DC. Connection
should be done via the colored 3-wire cable to the T unit
output (Vo+ and Vo-) and the remote control input
Ucr.
Wrong connection may damage the sensor.
The temperature sensor should be as close to the battery
terminal as possible for most accurate temperature meas-
urements.
Sensor
20/22
Vo–
12/14
Vo+
28
i/Ucr
brown
white
green
05065
Fig. 25
Wiring diagram sensor
Table 10: Type survey
Sensor types
Battery voltage
Float charge
Cell voltage
Temp. coefficient
Cable length
nominal [V]
voltage (20
°C) [V]
(20
°C) [V/cell]
[mV/K/cell]
[m]
S24-2.23-30-02 1
24
26.76
2.23
–3.0
2
S24-2.23-35-02 1
24
26.76
2.23
–3.5
2
S36-2.23-30-02 1
36
40.14
2.23
–3.0
2
S36-2.23-35-02 1
36
40.14
2.23
–3.5
2
S48-2.23-30-02 1
48
53.52
2.23
–3.0
2
S48-2.23-35-02 1
48
53.52
2.23
–3.5
2
S48-2.27-30-02 2
48
54.48
2.27
–3.0
2
S48-2.27-35-02 2
48
54.48
2.27
–3.5
2
1 Standard types for conventional tubular lead acid batteries. The same sensor can be used for battery systems with different cell volt-
ages within the selectable range of Z. Each step on the selector switch changes the cell voltage by 10 mV in the range from 2.23 V up
to 2.32 V, at 20
°C.
2 Standard types for sealed lead acid batteries for LT 1740 without option Z.
Battery specific sensors with cell voltages from 2.23 V up to
2.32 V and temperature coefficients from –2 up to –4.5 mV/
K/cell or different cable lengths are available upon request.
Important remarks
Note 1:
By choosing a battery with a large temperature coefficient
or with a high cell voltage, the required temperature range
may be limited by the output voltage control range of the T
unit(s).
Note 2:
The temperature sensor together with the mounting fixture
should be mounted as close as possible to the battery.
Through their chemical activity batteries may be warmer
than the ambient temperature. Battery banks heat up if they
are mounted too close together thus blocking free air flow.
Since battery life is halved with every 10 K temperature in-
crease, it is recommended that the batteries be mounted at
the bottom of the cabinet or in a separate, cool area.
Note 3:
The sensor supply wire Vo+ (brown) should be refered to
the T unit output pin 12/14. If the sensor common (green)
wire is connected to the power bus, resistive voltage drops
or voltage drops across decoupling diodes in the Vo– sup-
ply line will be compensated by the sensor.
Decoupling diodes or fuses in the Vo– supply line are not
recommended as in case of a short circuit across the output
of a T unit, status signalling of the system is affected.
Note 4:
For installation of batteries see also VDE 510 as well as the
recommendations of the battery manufacturers.
Table 11: Sensor data
Characteristics
Condition
min
typ
max
Unit
Tsensor
Sensor temperature range
Ucr = 5.5...11.5 V
–10
60
°C
Ucr
Control voltage range
Absolute ratings
3.9
15
V
Ucr td
Control voltage tolerance
Tsensor = 20°C
±0.1
Tsensor = 0...53°C
±0.2
相关PDF资料
PDF描述
LM1001-7EPD4F 1-OUTPUT 50 W AC-DC REG PWR SUPPLY MODULE
LM1001-7EPV0AH 1-OUTPUT 50 W AC-DC REG PWR SUPPLY MODULE
LM1001-7PD3A 1-OUTPUT 50 W AC-DC REG PWR SUPPLY MODULE
LM1001-7PV3HF 1-OUTPUT 50 W AC-DC REG PWR SUPPLY MODULE
LM1001-7RD8AH 1-OUTPUT 50 W AC-DC REG PWR SUPPLY MODULE
相关代理商/技术参数
参数描述
LT170A 制造商:未知厂家 制造商全称:未知厂家 功能描述:Linear Hall-Effect Sensor
LT170E2 制造商:未知厂家 制造商全称:未知厂家 功能描述:LT170E2 |Data Sheet
LT170Z 制造商:SEOUL 制造商全称:Seoul Semiconductor 功能描述:GREEN OVAL LAMP LED
LT171 制造商:SEOUL 制造商全称:Seoul Semiconductor 功能描述:RED LAMP LED
LT1711 制造商:未知厂家 制造商全称:未知厂家 功能描述:UNDERSTANDING THE SUBJECT IS CUSTOMER SERVICE