参数资料
| 型号： | LT1722IS8 |
| 厂商： | Linear Technology |
| 文件页数： | 5/18页 |
| 文件大小： | 0K |
| 描述： | IC PREC OPAMP 200MHZ SNGL 8-SOIC |
| 标准包装： | 100 |
| 放大器类型： | 电压反馈 |
| 电路数： | 1 |
| 转换速率： | 70 V/µs |
| 增益带宽积： | 200MHz |
| 电流 - 输入偏压： | 40nA |
| 电压 - 输入偏移： | 100µV |
| 电流 - 电源： | 3.7mA |
| 电流 - 输出 / 通道： | 50mA |
| 电压 - 电源，单路/双路(±)： | 5 V ~ 10 V，±2.5 V ~ 5 V |
| 工作温度： | -40°C ~ 85°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 8-SOIC（0.154"，3.90mm 宽） |
| 供应商设备封装： | 8-SO |
| 包装： | 管件 |
LT1722/LT1723/LT1724
13
172234fb
The LT1722/LT1723/LT1724 may be inserted directly into
many operational amplier applications improving both DC
and AC performance, as well as noise and distortion.
Layout and Passive Components
The LT1722/LT1723/LT1724 ampliers are more tolerant
of less than ideal layouts than other high speed ampliers.
For maximum performance (for example, fast settling time)
use a ground plane, short lead lengths and RF quality
bypass capacitors (0.01μF to 0.1μF). For high drive current
applications, use low ESR supply bypass capacitors (1μF
to 10μF tantalum). The output/input parasitic coupling
should be minimized when high frequency performance
is required.
The parallel combination of the feedback resistor and gain
setting resistor on the inverting input combine with the
input capacitance to form a pole that can cause peaking
or even oscillations. In parallel with the feedback resistor,
a capacitor of value:
CF > RG CIN/RF
should be used to cancel the input pole and optimize
dynamic performance. For unity-gain applications where
a feedback resistor is used, such as an I-to-V converter,
CF should be ve times greater than CIN; an optimum
value for CF is 10pF.
Input Considerations
Each of the LT1722/LT1723/LT1724 inputs is protected with
back-to-back diodes across the bases of the NPN input
devices. If greater than 0.7V differential input voltages are
anticipated, the input current must be limited to less than
10mA with an external series resistor. Each input also has
two ESD clamp diodes—one to each supply. If an input is
driven beyond the supply, limit the current with an external
resistor to less than 10mA. The input stage protection
circuit is shown in Figure 1.
The input currents of the LT1722/LT1723/LT1724 are
typically in the tens of nA range due to the bias current
cancellation technique used at the input. As the input
offset current can be greater than either input current,
APPLICATIONS INFORMATION
Figure 1. Input Stage Protection
adding resistance to balance source resistance is not
recommended. The value of the source resistor should
be below 12k as it actually degrades DC accuracy and
also increases noise.
Total Input Noise
The total input noise of the LT1722/LT1723/LT1724 is
optimized for a source resistance between 0.8k and 12k.
Within this range, the total input noise is dominated by
the noise of the source resistance itself. When the source
resistance is below 0.8k, voltage noise of the amplier
dominates. When the source resistance is above 12k, the
input noise current is the dominant contributor.
Capacitive Loading
The LT1722/LT1723/LT1724 drive capacitive loads up to
100pF with unity gain. As the capacitive load increases,
both the bandwidth and the phase margin decrease causing
peaking in the frequency response and overshoot in the
transient response. When there is a need to drive a larger
capacitive load, a 25Ω series resistance assures stability
with any value of load capacitor. A feedback capacitor also
helps to reduce any peaking.
Power Dissipation
The LT1722/LT1723/LT1724 combine high speed and
large output drive in a small package. Maximum junction
temperature(TJ)iscalculatedfromtheambienttemperature
(TA), power dissipation per amplier (PD) and number of
ampliers (n) as follows:
TJ = TA + (n PD θJA)
D1
D3
+IN
D4
D5
D6
1723 F01
D2
I1
I2
R
Q1
REXT
Q2
VS
+
VS
–
–IN
REXT
相关PDF资料 |
PDF描述 |
|---|---|
| F0603C2R50FWTR | FUSE 2.50A 16V FAST THIN 0603 |
| 1SMB10AT3 | TVS ZENER UNIDIRECT 600W 10V SMB |
| MP2-H180-51S2-S-TG30 | CONN HEADER 2-FB 180POS 5ROW |
| AD8666ARZ-REEL7 | IC OPAMP GP R-R 4MHZ DUAL 8SOIC |
| F0603C1R75FWTR | FUSE 1.75A 24V FAST THIN 0603 |
相关代理商/技术参数 |
参数描述 |
|---|---|
| LT1722IS8#PBF | 功能描述:IC PREC OPAMP 200MHZ SNGL 8-SOIC RoHS:是 类别:集成电路 (IC) >> Linear - Amplifiers - Instrumentation 系列:- 标准包装:2,500 系列:- 放大器类型:通用 电路数:1 输出类型:满摆幅 转换速率:0.11 V/µs 增益带宽积:350kHz -3db带宽:- 电流 - 输入偏压:4nA 电压 - 输入偏移:20µV 电流 - 电源:260µA 电流 - 输出 / 通道:20mA 电压 - 电源，单路/双路(±):2.7 V ~ 36 V，±1.35 V ~ 18 V 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:8-SOIC（0.154"，3.90mm 宽） 供应商设备封装:8-SO 包装:带卷 (TR) |
| LT1722IS8#TR | 功能描述:IC PREC OPAMP 200MHZ SNGL 8-SOIC RoHS:否 类别:集成电路 (IC) >> Linear - Amplifiers - Instrumentation 系列:- 标准包装:2,500 系列:- 放大器类型:通用 电路数:1 输出类型:满摆幅 转换速率:0.11 V/µs 增益带宽积:350kHz -3db带宽:- 电流 - 输入偏压:4nA 电压 - 输入偏移:20µV 电流 - 电源:260µA 电流 - 输出 / 通道:20mA 电压 - 电源，单路/双路(±):2.7 V ~ 36 V，±1.35 V ~ 18 V 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:8-SOIC（0.154"，3.90mm 宽） 供应商设备封装:8-SO 包装:带卷 (TR) |
| LT1722IS8#TRPBF | 功能描述:IC PREC OPAMP 200MHZ SNGL 8-SOIC RoHS:是 类别:集成电路 (IC) >> Linear - Amplifiers - Instrumentation 系列:- 标准包装:2,500 系列:- 放大器类型:通用 电路数:1 输出类型:满摆幅 转换速率:0.11 V/µs 增益带宽积:350kHz -3db带宽:- 电流 - 输入偏压:4nA 电压 - 输入偏移:20µV 电流 - 电源:260µA 电流 - 输出 / 通道:20mA 电压 - 电源，单路/双路(±):2.7 V ~ 36 V，±1.35 V ~ 18 V 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:8-SOIC（0.154"，3.90mm 宽） 供应商设备封装:8-SO 包装:带卷 (TR) |
| LT1723 | 制造商:未知厂家 制造商全称:未知厂家 功能描述:Optoelectronic |
| LT1723CMS8 | 功能描述:IC OPAMP PREC DUAL 200MHZ 8MSOP RoHS:否 类别:集成电路 (IC) >> Linear - Amplifiers - Instrumentation 系列:- 标准包装:2,500 系列:- 放大器类型:通用 电路数:1 输出类型:满摆幅 转换速率:0.11 V/µs 增益带宽积:350kHz -3db带宽:- 电流 - 输入偏压:4nA 电压 - 输入偏移:20µV 电流 - 电源:260µA 电流 - 输出 / 通道:20mA 电压 - 电源，单路/双路(±):2.7 V ~ 36 V，±1.35 V ~ 18 V 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:8-SOIC（0.154"，3.90mm 宽） 供应商设备封装:8-SO 包装:带卷 (TR) |
发布紧急采购，3分钟左右您将得到回复。