- 您现在的位置：买卖IC网 > PDF目录5169 > LT1761IS5-BYP#TRMPBF (Linear Technology)IC REG LDO ADJ .1A TSOT23-5 PDF资料下载
参数资料
| 型号： | LT1761IS5-BYP#TRMPBF |
| 厂商： | Linear Technology |
| 文件页数： | 14/22页 |
| 文件大小： | 0K |
| 描述： | IC REG LDO ADJ .1A TSOT23-5 |
| 产品培训模块： | More Information on LDOs |
| 标准包装： | 1 |
| 稳压器拓扑结构： | 正，可调式 |
| 输出电压： | 1.22 V ~ 20 V |
| 输入电压： | 1.8 V ~ 20 V |
| 电压 - 压降（标准）： | 0.3V @ 100mA |
| 稳压器数量： | 1 |
| 电流 - 输出： | 100mA |
| 电流 - 限制（最小）： | 110mA |
| 工作温度： | -40°C ~ 125°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | SOT-23-5 细型，TSOT-23-5 |
| 供应商设备封装： | TSOT-23-5 |
| 包装： | 标准包装 |
| 产品目录页面： | 1328 (CN2011-ZH PDF) |
| 其它名称： | LT1761IS5-BYP#TRMPBFDKR |
LT1761 Series
PIN FUNCTIONS
IN (Pin 1): Input. Power is supplied to the device through
the IN pin. A bypass capacitor is required on this pin if
the device is more than six inches away from the main
input ?lter capacitor. In general, the output impedance
of a battery rises with frequency, so it is advisable to
include a bypass capacitor in battery-powered circuits. A
bypass capacitor in the range of 1μF to 10μF is suf?cient.
The LT1761 regulators are designed to withstand reverse
voltages on the IN pin with respect to ground and the OUT
pin. In the case of a reverse input, which can happen if
a battery is plugged in backwards, the device will act as
if there is a diode in series with its input. There will be
no reverse current ?ow into the regulator and no reverse
voltage will appear at the load. The device will protect both
itself and the load.
GND (Pin 2): Ground.
SHDN (Pin 3, Fixed/-SD Devices): Shutdown. The SHDN
pin is used to put the LT1761 regulators into a low power
shutdown state. The output will be off when the SHDN pin
is pulled low. The SHDN pin can be driven either by 5V logic
or open-collector logic with a pull-up resistor. The pull-up
resistor is required to supply the pull-up current of the
open-collector gate, normally several microamperes, and
the SHDN pin current, typically 1μA. If unused, the SHDN
pin must be connected to V IN . The device will not function
if the SHDN pin is not connected. For the LT1761-BYP, the
SHDN pin is internally connected to V IN .
BYP (Pins 3/4, Fixed/-BYP Devices): Bypass. The BYP
pin is used to bypass the reference of the LT1761 regula-
tors to achieve low noise performance from the regulator.
The BYP pin is clamped internally to ±0.6V (one V BE ) from
ground. A small capacitor from the output to this pin will
bypass the reference to lower the output voltage noise.
A maximum value of 0.01μF can be used for reducing
output voltage noise to a typical 20μV RMS over a 10Hz
to 100kHz bandwidth. If not used, this pin must be left
unconnected.
ADJ (Pin 4, Adjustable Devices Only): Adjust Pin. For the
adjustable LT1761, this is the input to the error ampli?er.
This pin is internally clamped to ±7V. It has a bias current
of 30nA which ?ows into the pin (see curve of ADJ Pin
Bias Current vs Temperature in the Typical Performance
Characteristics section). The ADJ pin voltage is 1.22V
referenced to ground and the output voltage range is
1.22V to 20V.
OUT (Pin 5): Output. The output supplies power to the load.
A minimum output capacitor of 1μF is required to prevent
oscillations. Larger output capacitors will be required for
applications with large transient loads to limit peak volt-
age transients. See the Applications Information section
for more information on output capacitance and reverse
output characteristics.
1761sff
14
相关PDF资料 |
PDF描述 |
|---|---|
| ISL6264CRZ-T | IC CORE CTRLR TWO-PHASE 40-QFN |
| X40030V14-C | IC VOLTAGE MONITOR TRPL 14-TSSOP |
| ASC25DRTH-S13 | CONN EDGECARD 50POS .100 EXTEND |
| X40030V14-BT1 | IC VOLTAGE MONITOR TRPL 14-TSSOP |
| ISL6262CRZ-TK | IC CORE CTRLR 2PHASE 48-QFN |
相关代理商/技术参数 |
参数描述 |
|---|---|
| LT1761IS5-BYP-TRPBF | 制造商:LINER 制造商全称:Linear Technology 功能描述:100mA, Low Noise, LDO Micropower Regulators in TSOT-23 |
| LT1761IS5-SD | 制造商:LINER 制造商全称:Linear Technology 功能描述:100mA, Low Noise, LDO Micropower Regulators in TSOT-23 |
| LT1761IS5-SD#PBF | 制造商:Linear Technology 功能描述:IC ADJ LDO REG 1.22V TO 20V 5-TSOT-23 制造商:Linear Technology 功能描述:IC LDO REG 0.1A 1.22V TO 20 制造商:Linear Technology 功能描述:IC, LDO REG, 0.1A, 1.22V TO 20V, 5TSOT23 制造商:Linear Technology 功能描述:IC, ADJ LDO REG, 1.22V TO 20V, 5-TSOT-23; Primary Input Voltage:20V; Dropout Voltage Vdo:300mV; No. of Pins:5; Output Current:100mA; Operating Temperature Min:-40C; Operating Temperature Max:125C; MSL:MSL 1 - Unlimited ;RoHS Compliant: Yes |
| LT1761IS5-SD#PBF | 制造商:Linear Technology 功能描述:IC ADJ LDO REG 1.22V TO 20V 5-TSOT-23 制造商:Linear Technology 功能描述:IC, ADJ LDO REG, 1.22V TO 20V, 5-TSOT-23 |
| LT1761IS5-SD#TRMPBF | 功能描述:IC REG LDO ADJ .1A TSOT23-5 RoHS:是 类别:集成电路 (IC) >> PMIC - 稳压器 - 线性 系列:- 产品培训模块:MIC5365/66 Ultra-small LDO Regulators 标准包装:1 系列:- 稳压器拓扑结构:正，固定式 输出电压:3V 输入电压:最高 5.5V 电压 - 压降（标准）:0.155V @ 150mA 稳压器数量:1 电流 - 输出:150mA 电流 - 限制（最小）:200mA 工作温度:-40°C ~ 125°C 安装类型:表面贴装 封装/外壳:4-UDFN 裸露焊盘，4-TMLF? 供应商设备封装:4-TMLF?（1x1） 包装:Digi-Reel® 其它名称:576-3192-6 |
发布紧急采购，3分钟左右您将得到回复。