- 您现在的位置：买卖IC网 > PDF目录44983 > LT1933IDCB#PBF (LINEAR TECHNOLOGY CORP) 1.05 A SWITCHING REGULATOR, 600 kHz SWITCHING FREQ-MAX, PDSO6 PDF资料下载
参数资料
| 型号： | LT1933IDCB#PBF |
| 厂商： | LINEAR TECHNOLOGY CORP |
| 元件分类： | 稳压器 |
| 英文描述： | 1.05 A SWITCHING REGULATOR, 600 kHz SWITCHING FREQ-MAX, PDSO6 |
| 封装： | 2 X 3 MM, 0.75 MM HEIGHT, LEAD FREE, PLASTIC, MO-229, DFN-6 |
| 文件页数： | 3/20页 |
| 文件大小： | 357K |
| 代理商： | LT1933IDCB#PBF |
LT1933
11
1933fe
APPLICATIONS INFORMATION
BOOST Pin Considerations
Capacitor C3 and diode D2 are used to generate a boost
voltage that is higher than the input voltage. In most cases
a 0.1μF capacitor and fast switching diode (such as the
1N4148 or 1N914) will work well. Figure 2 shows two
ways to arrange the boost circuit. The BOOST pin must
be at least 2.3V above the SW pin for best efciency. For
outputs of 3V and above, the standard circuit (Figure 2a)
is best. For outputs between 2.5V and 3V, use a 0.47μF
capacitor and a small Schottky diode (such as the BAT-54).
For lower output voltages the boost diode can be tied to
the input (Figure 2b). The circuit in Figure 2a is more ef-
cient because the BOOST pin current comes from a lower
voltage source. You must also be sure that the maximum
voltage rating of the BOOST pin is not exceeded.
The minimum operating voltage of an LT1933 application
is limited by the undervoltage lockout (~3.35V) and by
the maximum duty cycle as outlined above. For proper
startup, the minimum input voltage is also limited by the
boost circuit. If the input voltage is ramped slowly, or the
LT1933 is turned on with its SHDN pin when the output
is already in regulation, then the boost capacitor may not
be fully charged. Because the boost capacitor is charged
with the energy stored in the inductor, the circuit will rely
on some minimum load current to get the boost circuit
running properly. This minimum load will depend on input
and output voltages, and on the arrangement of the boost
circuit. The minimum load generally goes to zero once the
circuit has started. Figure 3 shows a plot of minimum load
to start and to run as a function of input voltage. In many
Figure 2. Two Circuits for Generating the Boost Voltage
Figure 3. The Minimum Input Voltage Depends on Output Voltage, Load Current and Boost Circuit
VIN
BOOST
GND
SW
VIN
LT1933
(2a)
D2
1933 F02a
VOUT
C3
VBOOST – VSW VOUT
MAX VBOOST VIN + VOUT
VIN
BOOST
GND
SW
VIN
LT1933
(2b)
D2
1933 F02b
VOUT
C3
VBOOST – VSW VIN
MAX VBOOST 2VIN
LOAD CURRENT (mA)
4.5
INPUT
VOL
TAGE
(V) 5.0
5.5
6.0
1933 F03a
3.0
3.5
4.0
VOUT = 3.3V
TA = 25°C
L = 22μH
TO START
TO RUN
1
10
100
LOAD CURRENT (mA)
5
INPUT
VOLTAGE
(V)
6
7
8
1933 F03b
4
VOUT = 5V
TA = 25°C
L = 33μH
TO START
TO RUN
1
10
100
Minimum Input Voltage VOUT = 3.3V
Minimum Input Voltage VOUT = 5V
相关PDF资料 |
PDF描述 |
|---|---|
| LT1933IS6#PBF | 1.05 A SWITCHING REGULATOR, 600 kHz SWITCHING FREQ-MAX, PDSO6 |
| LT1934IS6#PBF | 0.49 A SWITCHING REGULATOR, PDSO6 |
| LT1934ES6-1#PBF | 0.16 A SWITCHING REGULATOR, PDSO6 |
| LT1934EDCB#TR | 0.49 A SWITCHING REGULATOR, PDSO6 |
| LT1934EDCB-1 | 0.49 A SWITCHING REGULATOR, PDSO6 |
相关代理商/技术参数 |
参数描述 |
|---|---|
| LT1933IDCB-TR | 制造商:LINER 制造商全称:Linear Technology 功能描述:600mA, 500kHz Step-Down Switching Regulator in SOT-23 and DFN Packages |
| LT1933IDCB-TRPBF | 制造商:LINER 制造商全称:Linear Technology 功能描述:600mA, 500kHz Step-Down Switching Regulator in SOT-23 and DFN Packages |
| LT1933IS6 | 制造商:Linear Technology 功能描述:Conv DC-DC Single Step Down 3.6V to 36V 6-Pin TSOT-23 |
| LT1933IS6#PBF | 制造商:Linear Technology 功能描述:Conv DC-DC Single Step Down 3.6V to 36V 6-Pin TSOT-23 制造商:Linear Technology 功能描述:BUCK 36VIN 0.6A 500KHZ 6SOT23 制造商:Linear Technology 功能描述:IC STEP-DOWN REGULATOR 6-TSOT-23 制造商:Linear Technology 功能描述:BUCK, 36VIN, 0.6A, 500KHZ, 6SOT23 制造商:Linear Technology 功能描述:IC, STEP-DOWN REGULATOR, 6-TSOT-23; Primary Input Voltage:36V; No. of Outputs:1; Output Current:600mA; No. of Pins:6; Operating Temperature Min:-40C; Operating Temperature Max:125C; MSL:MSL 1 - Unlimited; Package / Case:6-TSOT-23 ;RoHS Compliant: Yes |
| LT1933IS6#TR | 功能描述:IC REG BUCK ADJ 0.6A TSOT23-6 RoHS:否 类别:集成电路 (IC) >> PMIC - 稳压器 - DC DC 开关稳压器 系列:- 标准包装:2,500 系列:- 类型:升压（升压） 输出类型:可调式 输出数:1 输出电压:1.24 V ~ 30 V 输入电压:1.5 V ~ 12 V PWM 型:电流模式，混合 频率 - 开关:600kHz 电流 - 输出:500mA 同步整流器:无 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:8-SOIC（0.154"，3.90mm 宽） 包装:带卷 (TR) 供应商设备封装:8-SOIC |
发布紧急采购，3分钟左右您将得到回复。