- 您现在的位置：买卖IC网 > PDF目录6049 > LT1999HS8-10#PBF (Linear Technology)IC OP AMP CURRENT SENSE 8-SOIC PDF资料下载
参数资料
| 型号： | LT1999HS8-10#PBF |
| 厂商： | Linear Technology |
| 文件页数： | 6/24页 |
| 文件大小： | 0K |
| 描述： | IC OP AMP CURRENT SENSE 8-SOIC |
| 标准包装： | 100 |
| 放大器类型： | 电流检测 |
| 电路数： | 1 |
| 输出类型： | 带缓冲 |
| 转换速率： | 3 V/µs |
| -3db带宽： | 2MHz |
| 电流 - 输入偏压： | 137.5µA |
| 电压 - 输入偏移： | 500µV |
| 电流 - 电源： | 5.8mA |
| 电流 - 输出 / 通道： | 40mA |
| 电压 - 电源，单路/双路(±)： | 4.5 V ~ 5.5 V |
| 工作温度： | -40°C ~ 125°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 8-SOIC（0.154"，3.90mm 宽） |
| 供应商设备封装： | 8-SO |
| 包装： | 管件 |
LT1999-10/LT1999-20/
LT1999-50
14
1999fb
The LT1999 current sense amplifier provides accurate
bidirectionalmonitoringofcurrentthroughauser-selected
senseresistor.Thevoltagegeneratedbythecurrentflowing
in the sense resistor is amplified by a fixed gain of 10V/V,
20V/V or 50V/V (LT1999-10, LT1999-20, or LT1999-50
respectively) and is level shifted to the OUT pin. The volt-
age difference and polarity of the OUT pin with respect
to REF (Pin 6) indicates magnitude and direction of the
current in the sense resistor.
THEORY OF OPERATION
Refer to the Block Diagram (Figure 1).
Case 1: V+ < VCM < 80V
For input common mode voltages exceeding the power
supply, one can assume D1 of Figure 1 is completely off.
The sensed voltage (VSENSE) is applied across Pin 2 (+IN)
and Pin 3 (–IN) to matched resistors R+IN and R–IN (nomi-
nally 4k each). The opposite ends of R+IN and R–IN are
forced to equal potentials by transconductor GIN, which
convert the differentially sensed voltage into a sensed
current. The sensed current in R+IN and R–IN is combined,
level-shifted, and converted back into a voltage by trans-
resistance amplifier AO and resistor RG. Amplifier AO pro-
vides high open loop gain to accurately convert the sensed
current back into a voltage and to drive external loads. The
theoretical output voltage is determined by the sensed
voltage (VSENSE), and the ratio of two on-chip resistors:
VOUT VREF = VSENSE
RG
RIN
where
RIN =
R+IN + RIN
2
nominally 4k
FortheLT1999-10,RGisnominally40k.FortheLT1999-20,
RG is nominally 80k, and for the LT1999-50, RG is nomi-
nally 200k.
applicaTions inForMaTion
The voltage difference between the OUT pin and the REF
pin represent both polarity and magnitude of the sensed
voltage. The noninverting input of amplifier AO is biased
by a resistive 160k to 160k divider tied between V+ and
GND to set the default REF pin bias to mid-supply.
Case 2: –5V < VCM < V+
Forcommonmodeinputswhichtransitionoraresetbelow
the supply voltage, diode D1 will turn on and will provide a
source of current through R+S and R–S to bias the inputs
of transconductance amplifier GIN at least 2.25V above
GND. The transition is smooth and continuous; there are
negligible changes to either gain or amplifier voltage off-
set. The only difference in amplifier operation is the bias
currents provided by D1 through R+S and R–S are steered
through the input pins, otherwise amplifier operation is
identical. The inputs to transconductance amplifier GINare
still forced to equal potentials forcing any differential volt-
ages appearing at the +IN and –IN pins into a differential
current.Thisdifferentialcurrentiscombined,level-shifted,
and converted back into a voltage by trans-resistance
amplifier AO and Resistor RG. Resistors R+S and R–S are
trimmed to match R+IN and R–IN respectively, to prevent
common mode to differential conversion from occurring
(to the extent of the matched trim) when the input com-
mon mode transitions below V+.
As described in case 1, the output is determined by the
sense voltage and the ratio of two on-chip resistors:
VOUT VREF = VSENSE
RG
RIN
where
RIN =
R+IN + RIN
2
相关PDF资料 |
PDF描述 |
|---|---|
| TSW-111-14-L-S | CONN HEADER 11POS .100" SGL GOLD |
| TSW-125-07-T-S | CONN HEADER 25POS .100" SNGL TIN |
| LT1012CN8#PBF | IC PREC OP-AMP UNVRSL SNGL 8-DIP |
| AD8652ARMZ | IC OPAMP VF CMOS 50MHZ LN 8MSOP |
| TSW-105-07-L-D | CONN HEADER 10POS .100" DL GOLD |
相关代理商/技术参数 |
参数描述 |
|---|---|
| LT1999HS8-20#PBF | 功能描述:IC OP AMP CURRENT SENSE 8-SOIC RoHS:是 类别:集成电路 (IC) >> Linear - Amplifiers - Instrumentation 系列:- 标准包装:2,500 系列:- 放大器类型:通用 电路数:4 输出类型:- 转换速率:0.6 V/µs 增益带宽积:1MHz -3db带宽:- 电流 - 输入偏压:45nA 电压 - 输入偏移:2000µV 电流 - 电源:1.4mA 电流 - 输出 / 通道:40mA 电压 - 电源，单路/双路(±):3 V ~ 32 V，±1.5 V ~ 16 V 工作温度:0°C ~ 70°C 安装类型:表面贴装 封装/外壳:14-TSSOP（0.173"，4.40mm 宽） 供应商设备封装:14-TSSOP 包装:带卷 (TR) 其它名称:LM324ADTBR2G-NDLM324ADTBR2GOSTR |
| LT1999HS8-20#TRPBF | 功能描述:IC AMP CURR SENSE HV 8-SOIC RoHS:是 类别:集成电路 (IC) >> Linear - Amplifiers - Instrumentation 系列:- 标准包装:100 系列:- 放大器类型:通用 电路数:1 输出类型:- 转换速率:0.2 V/µs 增益带宽积:- -3db带宽:- 电流 - 输入偏压:100pA 电压 - 输入偏移:30µV 电流 - 电源:380µA 电流 - 输出 / 通道:- 电压 - 电源，单路/双路(±):±2 V ~ 18 V 工作温度:0°C ~ 70°C 安装类型:表面贴装 封装/外壳:8-SOIC（0.154"，3.90mm 宽） 供应商设备封装:8-SO 包装:管件 |
| LT1999HS8-50#PBF | 功能描述:IC OP AMP CURRENT SENSE 8-SOIC RoHS:是 类别:集成电路 (IC) >> Linear - Amplifiers - Instrumentation 系列:- 标准包装:150 系列:- 放大器类型:音频 电路数:2 输出类型:- 转换速率:5 V/µs 增益带宽积:12MHz -3db带宽:- 电流 - 输入偏压:100nA 电压 - 输入偏移:500µV 电流 - 电源:6mA 电流 - 输出 / 通道:50mA 电压 - 电源，单路/双路(±):4 V ~ 32 V，±2 V ~ 16 V 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:8-TSSOP（0.173"，4.40mm 宽） 供应商设备封装:8-TSSOP 包装:管件 |
| LT1999HS8-50#TRPBF | 功能描述:IC AMP CURR SENSE HV 8-SOIC RoHS:是 类别:集成电路 (IC) >> Linear - Amplifiers - Instrumentation 系列:- 标准包装:100 系列:- 放大器类型:通用 电路数:1 输出类型:- 转换速率:0.2 V/µs 增益带宽积:- -3db带宽:- 电流 - 输入偏压:100pA 电压 - 输入偏移:30µV 电流 - 电源:380µA 电流 - 输出 / 通道:- 电压 - 电源，单路/双路(±):±2 V ~ 18 V 工作温度:0°C ~ 70°C 安装类型:表面贴装 封装/外壳:8-SOIC（0.154"，3.90mm 宽） 供应商设备封装:8-SO 包装:管件 |
| LT1999IMS8-10 | 制造商:LINER 制造商全称:Linear Technology 功能描述:High Voltage, Bidirectional Current Sense Amplifier Low Power Shutdown <10μA |
发布紧急采购，3分钟左右您将得到回复。