参数资料
| 型号： | LT3010HMS8E#PBF |
| 厂商： | Linear Technology |
| 文件页数： | 11/18页 |
| 文件大小： | 0K |
| 描述： | IC REG LDO ADJ 50MA 8-MSOP |
| 产品培训模块： | More Information on LDOs |
| 标准包装： | 50 |
| 稳压器拓扑结构： | 正，可调式 |
| 输出电压： | 1.275 V ~ 60 V |
| 输入电压： | 3 V ~ 80 V |
| 电压 - 压降（标准）： | 0.3V @ 50mA |
| 稳压器数量： | 1 |
| 电流 - 输出： | 50mA |
| 电流 - 限制（最小）： | 55mA |
| 工作温度： | -40°C ~ 140°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 8-TSSOP，8-MSOP（0.118"，3.00mm 宽）裸露焊盘 |
| 供应商设备封装： | 8-MSOP-EP |
| 包装： | 管件 |
LT3010/LT3010-5
APPLICATIONS INFORMATION
The thermal resistance junction-to-case ( θ JC ), measured
at the exposed pad on the back of the die, is 16°C/W.
Continuous operation at large input/output voltage dif-
ferentials and maximum load current is not practical
due to thermal limitations. Transient operation at high
input/output differentials is possible. The approximate
thermal time constant for a 2500sq mm 3/32" FR-4 board
with maximum topside and backside area for one ounce
copper is 3 seconds. This time constant will increase as
more thermal mass is added (i.e. vias, larger board, and
other components).
For an application with transient high power peaks, average
power dissipation can be used for junction temperature
calculations as long as the pulse period is significantly less
than the thermal time constant of the device and board.
Calculating Junction Temperature
Example 1: Given an output voltage of 5V, an input volt-
age range of 24V to 30V, an output current range of 0mA
to 50mA, and a maximum ambient temperature of 50°C,
what will the maximum junction temperature be?
The power dissipated by the device will be equal to:
I OUT(MAX) ? (V IN(MAX) – V OUT ) + (I GND ? V IN(MAX) )
where:
I OUT(MAX) = 50mA
V IN(MAX) = 30V
I GND at (I OUT = 50mA, V IN = 30V) = 1mA
So:
P = 50mA ? (30V – 5V) + (1mA ? 30V) = 1.28W
The thermal resistance will be in the range of 40°C/W to
62°C/W depending on the copper area. So the junction
temperature rise above ambient will be approximately
equal to:
1.31W ? 50°C/W = 65.5°C
The maximum junction temperature will then be equal to
the maximum junction temperature rise above ambient
plus the maximum ambient temperature or:
T JMAX = 50°C + 65.5°C = 115.5°C
Example 2: Given an output voltage of 5V, an input voltage
of 48V that rises to 72V for 5ms(max) out of every 100ms,
and a 5mA load that steps to 50mA for 50ms out of every
250ms, what is the junction temperature rise above ambi-
ent? Using a 500ms period (well under the time constant
of the board), power dissipation is as follows:
P1(48V in, 5mA load) = 5mA ? (48V – 5V)
+ (200μA ? 48V) = 0.23W
P2(48V in, 50mA load) = 50mA ? (48V – 5V)
+ (1mA ? 48V) = 2.20W
P3(72V in, 5mA load) = 5mA ? (72V – 5V)
+ (200μA ? 72V) = 0.35W
P4(72V in, 50mA load) = 50mA ? (72V – 5V)
+ (1mA ? 72V) = 3.42W
Operation at the different power levels is as follows:
76% operation at P1, 19% for P2, 4% for P3, and
1% for P4.
P EFF = 76%(0.23W) + 19%(2.20W) + 4%(0.35W)
+ 1%(3.42W) = 0.64W
With a thermal resistance in the range of 40°C/W to
62°C/W, this translates to a junction temperature rise above
ambient of 26°C to 38°C.
High Temperature Operation
Care must be taken when designing LT3010H applications to
operate at high ambient temperatures. The LT3010H works
at elevated temperatures but erratic operation can occur
due to unforeseen variations in external components. Some
tantalum capacitors are available for high temperature
operation, but ESR is often several ohms; capacitor ESR
30105fe
11
相关PDF资料 |
PDF描述 |
|---|---|
| MIC5353-3.0YMT TR | IC REG LDO 3V .5A 6TMLF |
| MIC59300YME TR | IC REG LDO ADJ 3A 8ESOIC |
| ABC17DREI-S734 | CONN EDGECARD 34POS .100 EYELET |
| HBC44DRTI-S13 | CONN EDGECARD 88POS .100 EXTEND |
| EMC26DRYI-S13 | CONN EDGECARD 52POS .100 EXTEND |
相关代理商/技术参数 |
参数描述 |
|---|---|
| LT3010MPMS8E | 制造商:LINER 制造商全称:Linear Technology 功能描述:50mA, 3V to 80V Low Dropout Micropower Linear Regulator |
| LT3010MPMS8E#PBF | 功能描述:IC REG LDO ADJ 50MA 8-MSOP RoHS:是 类别:集成电路 (IC) >> PMIC - 稳压器 - 线性 系列:- 标准包装:1 系列:- 稳压器拓扑结构:正，固定式 输出电压:8V 输入电压:10.5 V ~ 23 V 电压 - 压降（标准）:1.7V @ 40mA 稳压器数量:1 电流 - 输出:100mA（最小值） 电流 - 限制（最小）:- 工作温度:0°C ~ 125°C 安装类型:表面贴装 封装/外壳:8-SOIC（0.154"，3.90mm 宽） 供应商设备封装:8-SOIC 包装:剪切带 (CT) 产品目录页面:1075 (CN2011-ZH PDF) 其它名称:296-24390-1 |
| LT3010MPMS8E#PBF | 制造商:Linear Technology 功能描述:IC, ADJ LDO VOLT REG, 1.275V-60V, MSOP-8 |
| LT3010MPMS8E#TRPBF | 功能描述:IC REG LDO ADJ 50MA 8-MSOP RoHS:是 类别:集成电路 (IC) >> PMIC - 稳压器 - 线性 系列:- 标准包装:3,000 系列:- 稳压器拓扑结构:正，固定式 输出电压:2.5V 输入电压:2.5 V ~ 5.5 V 电压 - 压降（标准）:- 稳压器数量:1 电流 - 输出:300mA（最小值） 电流 - 限制（最小）:360mA 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:SOT-23-5 细型，TSOT-23-5 供应商设备封装:TSOT-23-5 包装:带卷 (TR) |
| LT3010MPMS8E-5 | 制造商:Linear Technology 功能描述:LDO Regulator Pos 5V 0.05A 8-Pin MSOP EP |
发布紧急采购，3分钟左右您将得到回复。