参数资料
| 型号： | LT3032IDE-15#PBF |
| 厂商： | Linear Technology |
| 文件页数： | 19/24页 |
| 文件大小： | 0K |
| 描述： | IC REG LDO +-15V .15A 14DFN |
| 标准包装： | 91 |
| 稳压器拓扑结构： | 正和负固定式 |
| 输出电压： | ±15V |
| 输入电压： | ±2.3 V ~ ±20 V |
| 电压 - 压降（标准）： | 0.27V @ 150mA，0.3V @ -150mA |
| 稳压器数量： | 2 |
| 电流 - 输出： | 150mA |
| 电流 - 限制（最小）： | 170mA |
| 工作温度： | -40°C ~ 125°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 14-WFDFN 裸露焊盘 |
| 供应商设备封装： | 14-DFN（4x3） |
| 包装： | 管件 |
LT3032 Series
APPLICATIONS INFORMATION
If wiring modi?cations are not permissible for the applica-
tions, including series resistance between the power supply
and the input of the LT3032 also stabilizes the application.
As little as 0.1Ω to 0.5Ω, often less, is effective in damp-
ing the LC resonance. If the added impedance between
the power supply and the input is unacceptable, adding
ESR to the input capacitor also provides the necessary
damping of the LC resonance. However, the required ESR
is generally higher than the series impedance required.
Thermal Considerations
The power handling capability of the device is limited by
the maximum rated junction temperature (125°C). The
power dissipated by the device is made up of the follow-
ing components:
The LT3032 is a surface mount device and heat sinking is
accomplished by using the heat spreading capabilities of
the PC board and its copper traces. Copper board stiffen-
ers and plated through-holes can also be used to spread
the heat generated by power devices.
Note that the exposed pads (Pins 15 and 16) are elect-
rically connected to ground (GND) and the negative input
(INN) respectively.
The following table lists thermal resistance as a function
of copper area on a ?xed board size. All measurements
were taken in still air on a 4-layer FR-4 board with 1oz
solid internal planes and 2oz external trace planes with a
total ?nished board thickness of 1.6mm.
Table 3. DE Package, 14-Lead DFN
1. Output current of each side multiplied by the respective
COPPER AREA
THERMAL RESISTANCE
input/output voltage differential: (I OUT )(V IN to V OUT ),
and
2. GND pin current for each side multiplied by its input
voltage: (I GND )(V IN )
TOPSIDE*
2500mm 2
1000mm 2
225mm 2
100mm 2
BACKSIDE
2500mm 2
2500mm 2
2500mm 2
2500mm 2
BOARD AREA
2500mm 2
2500mm 2
2500mm 2
2500mm 2
(JUNCTION-TO-AMBIENT)
32°C/W
33°C/W
38°C/W
43°C/W
The GND pin current of each side is found by examining
the GND Pin Current curves in the Typical Performance
Characteristics. Total power dissipation equals the sum
for both channels of the components listed above.
The LT3032 has internal thermal limiting designed to pro-
tect each side of the regulator during overload conditions.
For continuous normal conditions, the maximum junction
temperature rating of 125°C must not be exceeded. It is
important to give careful consideration to all sources of
thermal resistance from junction to ambient. Additional
heat sources mounted nearby must also be considered.
*Device is mounted on topside
For further information on thermal resistance and using
thermal information, refer to JEDEC standard JESD51,
notably JESD51-12.
PCB layers, copper weight, board layout and thermal vias
affect the resultant thermal resistance. This table provides
thermal resistance numbers for best-case 4-layer boards
with 1oz internal and 2oz external copper. Modern, mul-
tilayer PCBs may not be able to achieve quite the same
level performance as found in this table.
3032fd
19
相关PDF资料 |
PDF描述 |
|---|---|
| LT3032IDE-12#PBF | IC REG LDO +-12V .15A 14DFN |
| LT1175IST-5 | IC REG LDO -5V .5A SOT223-3 |
| LT3032IDE-5#PBF | IC REG LDO +-5V .15A 14DFN |
| HSM25DRTI | CONN EDGECARD 50POS DIP .156 SLD |
| HMM25DRTI | CONN EDGECARD 50POS DIP .156 SLD |
相关代理商/技术参数 |
参数描述 |
|---|---|
| LT3032IDE-5#PBF | 功能描述:IC REG LDO +-5V .15A 14DFN RoHS:是 类别:集成电路 (IC) >> PMIC - 稳压器 - 线性 系列:- 标准包装:1 系列:- 稳压器拓扑结构:正，固定式 输出电压:3V 输入电压:2.3 V ~ 5.5 V 电压 - 压降（标准）:0.035V @ 150mA 稳压器数量:2 电流 - 输出:150mA 电流 - 限制（最小）:300mA 工作温度:-40°C ~ 125°C 安装类型:表面贴装 封装/外壳:6-UFDFN 裸露焊盘，6-TMLF? 供应商设备封装:6-TMLF?（1.6x1.6） 包装:Digi-Reel® 产品目录页面:1104 (CN2011-ZH PDF) 其它名称:576-3018-6 |
| LT3032IDE-5#TRPBF | 功能描述:IC REG LDO +-5V .15A 14DFN RoHS:是 类别:集成电路 (IC) >> PMIC - 稳压器 - 线性 系列:- 标准包装:1 系列:- 稳压器拓扑结构:正，固定式 输出电压:3V 输入电压:2.3 V ~ 5.5 V 电压 - 压降（标准）:0.035V @ 150mA 稳压器数量:2 电流 - 输出:150mA 电流 - 限制（最小）:300mA 工作温度:-40°C ~ 125°C 安装类型:表面贴装 封装/外壳:6-UFDFN 裸露焊盘，6-TMLF? 供应商设备封装:6-TMLF?（1.6x1.6） 包装:Digi-Reel® 产品目录页面:1104 (CN2011-ZH PDF) 其它名称:576-3018-6 |
| LT3032IDEPBF | 制造商:LINER 制造商全称:Linear Technology 功能描述:Dual 150mA Positive/Negative Low Noise Low Dropout Linear Regulator |
| LT3032IDETR | 制造商:LINER 制造商全称:Linear Technology 功能描述:Dual 150mA Positive/Negative Low Noise Low Dropout Linear Regulator |
| LT3032IDETRPBF | 制造商:LINER 制造商全称:Linear Technology 功能描述:Dual 150mA Positive/Negative Low Noise Low Dropout Linear Regulator |
发布紧急采购，3分钟左右您将得到回复。