参数资料
| 型号： | LT337AT |
| 厂商： | Linear Technology |
| 文件页数： | 8/12页 |
| 文件大小： | 0K |
| 描述： | IC REG LDO NEG ADJ TO220-3 |
| 标准包装： | 50 |
| 稳压器拓扑结构： | 负，可调式 |
| 输出电压： | -1.2 V ~ -37 V |
| 稳压器数量： | 1 |
| 电流 - 限制（最小）： | 1.5A |
| 工作温度： | 0°C ~ 125°C |
| 安装类型： | 通孔 |
| 封装/外壳： | TO-220-3 |
| 供应商设备封装： | TO-220-3 |
| 包装： | 管件 |
LT137A/LM137
LT337A/LM337
APPLICATIONS INFORMATION
becomes shorted, due to the output capacitor discharging
into the regulator. This can be prevented by using the diode
D1 (see Figure 2) between the input and the output.
The input capacitor, C2, is only required if the regulator is
more than 4 inches from the raw supply ?lter capacitor.
Bypassing the Adjustment Pin
The adjustment pin of the LT137A may be bypassed with a
capacitor to ground, C1, to reduce output ripple, noise, and
impedance. These parameters scale directly with output
voltage if the adjustment pin is not bypassed. A bypass
capacitor reduces ripple, noise, and impedance to that of
a 1.25V regulator. In a 15V regulator, for example, these
parameters are improved by 15V/1.25V = 12 to 1. This
improvement holds only for those frequencies where the
impedance of the bypass capacitor is less than R1. Ten
microfarads is generally suf?cient for 60Hz power line
applications where the ripple frequency is 120Hz since
X C = 130Ω. The capacitor should have a voltage rating at
least as high as the output voltage of the regulator. Values
larger than 10μF may be used, but if the output is larger
Proper Connection of Divider Resistors
The LT137A has an excellent load regulation speci?cation
of 0.5% and is measured at a point 1/8" from the bottom
of the package. To prevent degradation of load regulation,
the resistors which set output voltage, R1 and R2, must be
connected as shown in Figure 3. Note that the positive side
of the load has a true force and sense (Kelvin) connection,
but the negative side of the load does not.
R1 should be connected directly to the output lead of the
regulator, as close as possible to the speci?ed point 1/8"
from the case. R2 should be connected to the positive
side of the load separately from the positive (ground)
connection to the raw supply. With this arrangement, load
regulation is degraded only by the resistance between the
regulator output pin and the load. If R1 is connected to
the load, regulation will be degraded.
LEAD RESISTANCE HERE DOES
NOT AFFECT LOAD REGULATION
R2
than 25V, a diode, D2, should be added between the output
and adjustment pins (see Figure 2).
ADJ
R1
LOAD
+
C2
+
ADJ
C1
R2
R1
+
D2**
1N4002
C3
–V IN
V IN
LT137A V OUT
CONNECT R1
DIRECTLY TO
REGULATOR PIN
137A F03
LEAD RESISTANCE HERE
DEGRADES LOAD REGULATION.
MINIMIZE THE LENGTH OF
THIS LEAD.
–V IN
V IN
LT137A V OUT
–V OUT
Figure 3
137A F02
D1*
1N4002
*D1 PROTECTS THE REGULATOR FROM INPUT SHORTS TO GROUND. IT IS
REQUIRED ONLY WHEN C3 IS LARGER THAN 20μF AND V OUT IS LARGER THAN 6V.
**D2 PROTECTS THE ADJUST PIN OF THE REGULATOR FROM OUTPUT SHORTS
IF C2 IS LARGER THAN 10μF AND V OUT IS LARGER THAN –25V.
Figure 2
137afb
8
相关PDF资料 |
PDF描述 |
|---|---|
| MIC5366-3.3YMT TZ | IC REG LDO 3.3V .15A 4TMLF |
| ABB10DHAT | CONN EDGECARD 20POS R/A .050 SLD |
| RSM28DRYH | CONN EDGECARD 56POS DIP .156 SLD |
| AMM10DRSI-S288 | CONN EDGECARD 20POS .156 EXTEND |
| RSM30DRSI | CONN EDGECARD 60POS DIP .156 SLD |
相关代理商/技术参数 |
参数描述 |
|---|---|
| LT337AT#PBF | 功能描述:IC REG LDO NEG ADJ TO220-3 RoHS:是 类别:集成电路 (IC) >> PMIC - 稳压器 - 线性 系列:- 标准包装:1 系列:- 稳压器拓扑结构:正，固定式 输出电压:8V 输入电压:10.5 V ~ 23 V 电压 - 压降（标准）:1.7V @ 40mA 稳压器数量:1 电流 - 输出:100mA（最小值） 电流 - 限制（最小）:- 工作温度:0°C ~ 125°C 安装类型:表面贴装 封装/外壳:8-SOIC（0.154"，3.90mm 宽） 供应商设备封装:8-SOIC 包装:剪切带 (CT) 产品目录页面:1075 (CN2011-ZH PDF) 其它名称:296-24390-1 |
| LT337AT#PBF | 制造商:Linear Technology 功能描述:IC NEGATIVE ADJ REG -1.2V TO 7V TO-220 制造商:Linear Technology 功能描述:IC, NEGATIVE ADJ REG, -1.2V TO 7V TO-220 |
| LT337ATPBF | 制造商:Linear Technology 功能描述:Negative Adjustable Regulator 1.5A TO220 |
| LT337BC | 制造商:EDSYN 功能描述: |
| LT337H | 制造商:LINER 制造商全称:Linear Technology 功能描述:Negative Adjustable Regulator |
发布紧急采购，3分钟左右您将得到回复。