- 您现在的位置：买卖IC网 > PDF目录14849 > LT3470IDDB#TRMPBF (Linear Technology)IC REG BUCK ADJ 0.2A 8DFN PDF资料下载
参数资料
| 型号： | LT3470IDDB#TRMPBF |
| 厂商： | Linear Technology |
| 文件页数： | 13/20页 |
| 文件大小： | 0K |
| 描述： | IC REG BUCK ADJ 0.2A 8DFN |
| 标准包装： | 1 |
| 类型： | 降压（降压） |
| 输出类型： | 可调式 |
| 输出数： | 1 |
| 输出电压： | 1.25 V ~ 16 V |
| 输入电压： | 4 V ~ 40 V |
| PWM 型： | Burst Mode? |
| 电流 - 输出： | 200mA |
| 同步整流器： | 无 |
| 工作温度： | -40°C ~ 125°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 8-WFDFN 裸露焊盘 |
| 包装： | 标准包装 |
| 供应商设备封装： | 8-DFN（3x2） |
| 其它名称： | LT3470IDDB#TRMPBFDKR |
LT3470
APPLICATIONS INFORMATION
PCB Layout
For proper operation and minimum EMI, care must be
taken during printed circuit board layout. Note that large,
switched currents flow in the power switch, the internal
catch diode and the input capacitor. The loop formed by
these components should be as small as possible. Further-
more, the system ground should be tied to the regulator
ground in only one place; this prevents the switched cur-
rent from injecting noise into the system ground. These
components, along with the inductor and output capacitor,
should be placed on the same side of the circuit board,
and their connections should be made on that layer. Place
a local, unbroken ground plane below these components,
and tie this ground plane to system ground at one location,
SHDN
ideally at the ground terminal of the output capacitor C2.
Additionally, the SW and BOOST nodes should be kept as
small as possible. Unshielded inductors can induce noise
in the feedback path resulting in instability and increased
output ripple. To avoid this problem, use vias to route the
V OUT trace under the ground plane to the feedback divider
(as shown in Figure 5). Finally, keep the FB node as small
as possible so that the ground pin and ground traces
will shield it from the SW and BOOST nodes. Figure 5
shows component placement with trace, ground plane
and via locations. Include vias near the GND pin, or pad,
of the LT3470 to help remove heat from the LT3470 to
the ground plane.
SHDN
V IN
GND
C1
V IN
GND
VIAS TO FEEDBACK DIVIDER
VIAS TO LOCAL GROUND PLANE
C2
V OUT
V OUT
3470 F05
OUTLINE OF LOCAL GROUND PLANE
(5a)
(5b)
Figure 5. A Good PCB Layout Ensures Proper, Low EMI Operation
3470fd
13
相关PDF资料 |
PDF描述 |
|---|---|
| LT3470ITS8#TRMPBF | IC REG BUCK ADJ 0.2A TSOT23-8 |
| MIC3172YM | IC REG MULTI CONFIG 1.25A 8SOIC |
| HCM24DRUS | CONN EDGECARD 48POS .156 DIP SLD |
| PM2110-330K | INDUCTOR TOROID 33UH 10% SMD |
| ESM10DRMN-S664 | CONN EDGECARD 20POS .156 WW |
相关代理商/技术参数 |
参数描述 |
|---|---|
| LT3470ITS8 | 制造商:LINEAR 制造商全称:LINEAR 功能描述:Micropower Buck Regulator with Integrated Boost and Catch Diodes |
| LT3470ITS8#PBF | 制造商:Linear Technology 功能描述:Conv DC-DC Single Step Down 4V to 40V 8-Pin TSOT-23 制造商:Linear Technology 功能描述:IC BUCK REGULATOR 8-TSOT-23 制造商:Linear Technology 功能描述:SP-SWREG/Monolithic, Cut Tape 300mA, 40V Micropower Step-Down Reg in ThinSOT 制造商:Linear Technology 功能描述:IC, BUCK REGULATOR, 8-TSOT-23, Primary Input Voltage:40V, No. of Outputs:1, Output Voltage:16V, Output Current:200mA, No. of Pins:8, Operating Temperature Min:-40C, Operating Temperature Max:125C, MSL:MSL 1 - Unlimited , RoHS Compliant: Yes |
| LT3470ITS8#TR | 制造商:Linear Technology 功能描述:Conv DC-DC Single Step Down 4V to 40V 8-Pin TSOT-23 T/R 制造商:Linear Technology 功能描述:SP-SWREG/Monolithic, 300mA, 40V Micropower Step-Down Reg in ThinSOT |
| LT3470ITS8#TRM | 制造商:Linear Technology 功能描述:Conv DC-DC Single Step Down 4V to 40V 8-Pin TSOT-23 T/R |
| LT3470ITS8#TRMPBF | 功能描述:IC REG BUCK ADJ 0.2A TSOT23-8 RoHS:是 类别:集成电路 (IC) >> PMIC - 稳压器 - DC DC 开关稳压器 系列:- 标准包装:250 系列:- 类型:降压（降压） 输出类型:固定 输出数:1 输出电压:1.2V 输入电压:2.05 V ~ 6 V PWM 型:电压模式 频率 - 开关:2MHz 电流 - 输出:500mA 同步整流器:是 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:6-UFDFN 包装:带卷 (TR) 供应商设备封装:6-SON（1.45x1） 产品目录页面:1032 (CN2011-ZH PDF) 其它名称:296-25628-2 |
发布紧急采购，3分钟左右您将得到回复。