- 您现在的位置：买卖IC网 > PDF目录14832 > LT3580IMS8E#PBF (Linear Technology)IC REG BOOST INV SEPIC 2A 8MSOP PDF资料下载
参数资料
| 型号： | LT3580IMS8E#PBF |
| 厂商： | Linear Technology |
| 文件页数： | 16/28页 |
| 文件大小： | 0K |
| 描述： | IC REG BOOST INV SEPIC 2A 8MSOP |
| 标准包装： | 50 |
| 类型： | 升压（升压），反相，Sepic |
| 输出数： | 1 |
| 输入电压： | 2.5 V ~ 32 V |
| PWM 型： | 电流模式 |
| 频率 - 开关： | 200kHz ~ 2.5MHz |
| 电流 - 输出： | 2A |
| 同步整流器： | 无 |
| 工作温度： | -40°C ~ 125°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 8-TSSOP，8-MSOP（0.118"，3.00mm 宽）裸露焊盘 |
| 包装： | 管件 |
| 供应商设备封装： | 8-MSOP-EP |
| 产品目录页面： | 1332 (CN2011-ZH PDF) |
第1页第2页第3页第4页第5页第6页第7页第8页第9页第10页第11页第12页第13页第14页第15页当前第16页第17页第18页第19页第20页第21页第22页第23页第24页第25页第26页第27页第28页
LT3580
APPLICATIONS INFORMATION
Board layout also has a significant effect on thermal re-
sistance. The exposed package ground pad is the copper
plate that runs under the LT3580 die. This is a good thermal
path for heat out of the package. Soldering the pad onto
the board reduces die temperature and increases the power
capability of the LT3580. Provide as much copper area as
possible around this pad. Adding multiple feedthroughs
around the pad to the ground plane will also help. Figures
9 and 10 show the recommended component placement
for the boost and SEPIC configurations, respectively.
Layout Hints for Inverting Topology
Figure 11 shows recommended component placement for
the dual inductor inverting topology. Input bypass capaci-
tor, C1, should be placed close to the LT3580, as shown.
The load should connect directly to the output capacitor,
L1
C1
C2, for best load regulation. You can tie the local ground
into the system ground plane at the C3 ground terminal.
The cut ground copper at D1’s cathode is essential to
obtain low noise. This important layout issue arises due
to the chopped nature of the currents flowing in Q1 and
D1. If they are both tied directly to the ground plane before
being combined, switching noise will be introduced into
the ground plane. It is almost impossible to get rid of this
noise, once present in the ground plane. The solution
is to tie D1’s cathode to the ground pin of the LT3580
before the combined currents are dumped in the ground
plane as drawn in Figure 2, Figure 12 and Figure 13. This
single layout technique can virtually eliminate high
frequency “spike” noise, so often present on switching
regulator outputs.
D1
V OUT
SW
LT3580
HIGH
V IN
FREQUENCY
SWITCHING
C2 LOAD
PATH
GND
3580 F08
Figure 8. High Speed “Chopped” Switching Path for Boost Topology
3580fg
16
相关PDF资料 |
PDF描述 |
|---|---|
| RBM36DCTD-S288 | CONN EDGECARD 72POS .156 EXTEND |
| RSA15DRSI-S288 | CONN EDGECARD 30POS .125 EXTEND |
| ADP1111ARZ | IC REG BUCK BOOST INV ADJ 8SOIC |
| GBM36DTAH | CONN EDGECARD 72POS R/A .156 SLD |
| ADP1111ARZ-5 | IC REG BUCK BST INV 5V .2A 8SOIC |
相关代理商/技术参数 |
参数描述 |
|---|---|
| LT3580IMS8E-TRPBF | 制造商:LINER 制造商全称:Linear Technology 功能描述:Boost/Inverting DC/DC Converter with 2A Switch, Soft-Start, and Synchronization |
| LT3580MPMS8E | 制造商:LINER 制造商全称:Linear Technology 功能描述:Boost/Inverting DC/DC Converter with 2A Switch, Soft-Start, and Synchronization |
| LT3580MPMS8E#PBF | 功能描述:IC REG BOOST INV SEPIC 2A 8MSOP RoHS:是 类别:集成电路 (IC) >> PMIC - 稳压器 - DC DC 开关稳压器 系列:- 设计资源:Design Support Tool 标准包装:1 系列:- 类型:升压（升压） 输出类型:固定 输出数:1 输出电压:3V 输入电压:0.75 V ~ 2 V PWM 型:- 频率 - 开关:- 电流 - 输出:100mA 同步整流器:是 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:SOT-23-5 细型，TSOT-23-5 包装:剪切带 (CT) 供应商设备封装:TSOT-23-5 其它名称:AS1323-BTTT-30CT |
| LT3580MPMS8E#PBF | 制造商:Linear Technology 功能描述:IC DC-DC CONV 2.5MHz MSOP8 |
| LT3580MPMS8E#TRPBF | 功能描述:IC REG BOOST INV SEPIC 2A 8MSOP RoHS:是 类别:集成电路 (IC) >> PMIC - 稳压器 - DC DC 开关稳压器 系列:- 设计资源:Design Support Tool 标准包装:1 系列:- 类型:升压（升压） 输出类型:固定 输出数:1 输出电压:3V 输入电压:0.75 V ~ 2 V PWM 型:- 频率 - 开关:- 电流 - 输出:100mA 同步整流器:是 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:SOT-23-5 细型，TSOT-23-5 包装:剪切带 (CT) 供应商设备封装:TSOT-23-5 其它名称:AS1323-BTTT-30CT |
发布紧急采购，3分钟左右您将得到回复。