- 您现在的位置：买卖IC网 > PDF目录79682 > LT3694-1IUFD#TRPBF (LINEAR TECHNOLOGY CORP) 2.6 A SWITCHING REGULATOR, 2500 kHz SWITCHING FREQ-MAX, PQCC28 PDF资料下载
参数资料
| 型号： | LT3694-1IUFD#TRPBF |
| 厂商： | LINEAR TECHNOLOGY CORP |
| 元件分类： | 稳压器 |
| 英文描述： | 2.6 A SWITCHING REGULATOR, 2500 kHz SWITCHING FREQ-MAX, PQCC28 |
| 封装： | 4 X 5 MM, LEAD FREE, PLASTIC, MO-220, QFN-28 |
| 文件页数： | 13/28页 |
| 文件大小： | 276K |
| 代理商： | LT3694-1IUFD#TRPBF |
第1页第2页第3页第4页第5页第6页第7页第8页第9页第10页第11页第12页当前第13页第14页第15页第16页第17页第18页第19页第20页第21页第22页第23页第24页第25页第26页第27页第28页
LT3694/LT3694-1
20
36941fa
additional vias to reduce thermal resistance further. With
these steps, the thermal resistance from die (or junction)
to ambient can be reduced to
θJA = 34°C/W (UFD) or
θJA = 38°C/W (FE20). With 100 LFPM airflow, this resist-
ance can fall by another 25%. Further increases in airflow
will lead to lower thermal resistance.
Because of the large output current capability of the LT3694,
it is possible to dissipate enough heat to raise the junc-
tion temperature beyond the absolute maximum. When
operating at high ambient temperatures, the maximum
load current should be derated as the ambient temperature
approaches TJ(MAX).
Power dissipation within the LT3694 can be estimated
by calculating the total power loss from an efficiency
measurement and subtracting the catch diode loss
and inductor loss. The die temperature is calculated by
multiplying the LT3694 power dissipation by the thermal
resistance from junction-to-ambient. Keep in mind other
heat sources—such as the catch diode, inductor and LDO
pass transistors.
Other Linear Technology Publications
Application Notes 19, 35 and 44 contain more detailed
descriptions and design information for buck regulators
and other switching regulators. The LT1376 data sheet
has a more extensive discussion of output ripple, loop
compensation and stability testing. Design Note 318
shows how to generate a bipolar output supply using a
buck regulator.
PCB Layout
For proper operation and minimum EMI, care must be
taken during printed circuit board layout. Figure 9 shows
the recommended component placement with trace,
ground plane and via locations. Note that large, switched
currents flow in the LT3694’s VIN, DA, and SW pins, the
catch diode (D1) and the input capacitor (CIN). The loop
formed by these components should be as small as pos-
sible. These components, along with the inductor and
output capacitor, should be placed on the same side of
the circuit board, and their connections should be made
on that layer. Place a local, unbroken ground plane below
these components. The SW and BST nodes should be as
small as possible. Finally, keep the FB and VC nodes small
so that the ground traces will shield them from the SW
and BST nodes.
The exposed pad on the bottom of the package must be
soldered to ground so that the pad acts as a heat sink. To
keep thermal resistance low, extend the top side ground
plane as much as possible, and add thermal vias under
and near the LT3694 to additional ground planes within
the circuit board and on the bottom side.
High Temperature Considerations
The PCB must provide heat sinking to keep the LT3694
cool. The Exposed Pad on the bottom of the package must
be soldered to a ground plane. This ground should be tied
to large copper layers below with thermal vias; these lay-
ers will spread the heat dissipated by the LT3694. Place
APPLICATIONS INFORMATION
相关PDF资料 |
PDF描述 |
|---|---|
| LPQ353-CF | 4-OUTPUT 350 W AC-DC PWR FACTOR CORR MODULE |
| LNS-Y-28 | 1-OUTPUT 53 W AC-DC REG PWR SUPPLY MODULE |
| LM2675-ADJMWC | 2.2 A SWITCHING REGULATOR, 275 kHz SWITCHING FREQ-MAX, UUC |
| LV5125T | POWER SUPPLY SUPPORT CKT, PDSO8 |
| LME0515DC | DC-DC REG PWR SUPPLY MODULE |
相关代理商/技术参数 |
参数描述 |
|---|---|
| LT3694EFE#PBF | 功能描述:IC REG TRPL BUCK/LINEAR 20TSSOP RoHS:是 类别:集成电路 (IC) >> PMIC - 稳压器 - 线性 + 切换式 系列:- 标准包装:2,500 系列:- 拓扑:降压（降压）同步（3），线性（LDO）（2） 功能:任何功能 输出数:5 频率 - 开关:300kHz 电压/电流 - 输出 1:控制器 电压/电流 - 输出 2:控制器 电压/电流 - 输出 3:控制器 带 LED 驱动器:无 带监控器:无 带序列发生器:是 电源电压:5.6 V ~ 24 V 工作温度:-40°C ~ 85°C 安装类型:* 封装/外壳:* 供应商设备封装:* 包装:* |
| LT3694EFE#TRPBF | 功能描述:IC REG TRPL BUCK/LINEAR 20TSSOP RoHS:是 类别:集成电路 (IC) >> PMIC - 稳压器 - 线性 + 切换式 系列:- 标准包装:2,500 系列:- 拓扑:降压（降压）同步（3），线性（LDO）（2） 功能:任何功能 输出数:5 频率 - 开关:300kHz 电压/电流 - 输出 1:控制器 电压/电流 - 输出 2:控制器 电压/电流 - 输出 3:控制器 带 LED 驱动器:无 带监控器:无 带序列发生器:是 电源电压:5.6 V ~ 24 V 工作温度:-40°C ~ 85°C 安装类型:* 封装/外壳:* 供应商设备封装:* 包装:* |
| LT3694EFE-1#PBF | 功能描述:IC REG TRPL BUCK/LINEAR 20TSSOP RoHS:是 类别:集成电路 (IC) >> PMIC - 稳压器 - 线性 + 切换式 系列:- 标准包装:2,500 系列:- 拓扑:降压（降压）同步（3），线性（LDO）（2） 功能:任何功能 输出数:5 频率 - 开关:300kHz 电压/电流 - 输出 1:控制器 电压/电流 - 输出 2:控制器 电压/电流 - 输出 3:控制器 带 LED 驱动器:无 带监控器:无 带序列发生器:是 电源电压:5.6 V ~ 24 V 工作温度:-40°C ~ 85°C 安装类型:* 封装/外壳:* 供应商设备封装:* 包装:* |
| LT3694EFE-1#TRPBF | 功能描述:IC REG TRPL BUCK/LINEAR 20TSSOP RoHS:是 类别:集成电路 (IC) >> PMIC - 稳压器 - 线性 + 切换式 系列:- 标准包装:2,500 系列:- 拓扑:降压（降压）同步（3），线性（LDO）（2） 功能:任何功能 输出数:5 频率 - 开关:300kHz 电压/电流 - 输出 1:控制器 电压/电流 - 输出 2:控制器 电压/电流 - 输出 3:控制器 带 LED 驱动器:无 带监控器:无 带序列发生器:是 电源电压:5.6 V ~ 24 V 工作温度:-40°C ~ 85°C 安装类型:* 封装/外壳:* 供应商设备封装:* 包装:* |
| LT3694EFEPBF | 制造商:LINER 制造商全称:Linear Technology 功能描述:36V, 2.6A Monolithic Buck Regulator With Dual LDO |
发布紧急采购，3分钟左右您将得到回复。