- 您现在的位置：买卖IC网 > PDF目录79923 > LT4180EGN#PBF (LINEAR TECHNOLOGY CORP) POWER SUPPLY SUPPORT CKT, PDSO24 PDF资料下载
参数资料
| 型号： | LT4180EGN#PBF |
| 厂商： | LINEAR TECHNOLOGY CORP |
| 元件分类： | 电源管理 |
| 英文描述： | POWER SUPPLY SUPPORT CKT, PDSO24 |
| 封装： | 0.150 INCH, LEAD FREE, PLASTIC, SSOP-24 |
| 文件页数： | 18/18页 |
| 文件大小： | 278K |
| 代理商： | LT4180EGN#PBF |
LT4180
9
4180fa
APPLICATIONS INFORMATION
DESIGN PROCEDURE
The rst step in the design procedure is to determine
whether the LT4180 will control a linear or switching sup-
ply/regulator. If using a switching power supply or regulator,
it is recommended that the supply be synchronized to the
LT4180 by connecting the OSC pin to the SYNC pin (or
equivalent) of the supply.
If the power supply is synchronized to the LT4180, the
power supply switching frequency is determined by:
fOSC =
4
ROSC COSC
Recommended values for ROSC are between 20k and 100k
(with 30.1k the optimum for best accuracy) and greater
than 100pF for COSC. COSC may be reduced to as low as
50pF, but oscillator frequency accuracy will be somewhat
degraded.
The following example synchronizes a 250kHz switching
power supply to the LT4180. In this example, start with
ROSC = 30.1k:
COSC =
4
250kHz 30.1k
= 531pF
This example uses 470pF. For 250kHz:
ROSC =
4
250kHz 470pF
= 34.04k
The closest standard 1% value is 34k.
The next step is to determine the highest practical dither
frequency. This may be limited either by the response
time of the power supply or regulator, or by the propaga-
tion time of the wiring connecting the load to the power
supply or regulator.
First determine the settling time (to 1% of nal value)
of the power supply. The settling time should be the
worst-case value (over the whole operating envelope: VIN,
ILOAD, etc.).
F1
=
1
2 tSETTLING
Hz
For example, if the power supply takes 1ms to settle
(worst-case) to within 1% of nal value:
F1
=
1
2 1e – 3
= 500Hz
Next, determine the propagation time of the wiring. In
order to ignore transmission line effects, the dither period
should be approximately twenty times longer than this.
This will limit dither frequency to:
F2
=
VF
20 1.017ns/ft L
Hz
Where VF is the velocity factor (or velocity of propagation),
and L is the length of the wiring (in feet).
For example, assume the load is connected to a power
supply with 1000ft of CAT5 cable. Nominal velocity of
propagation is approximately 70%.
F2
=
0.7
20 1.017e – 9 1000
= 34.4kHz
The maximum dither frequency should not exceed F1 or
F2 (whichever is less):
fDITHER < min (F1, F2).
Continuing this example, the dither frequency should be
less than 500Hz (limited by the power supply).
With the dither frequency known, the division ratio can
be determined:
DRATIO =
fOSC
fDITHER
=
250,000
500
= 500
The nearest division ratio is 512 (set DIV0 = L, DIV1 =
DIV2 = H). Based on this division ratio, nominal dither
frequency will be:
fDITHER =
fOSC
DRATIO
=
250,000
512
= 488Hz
After the dither frequency is determined, the minimum
load decoupling capacitor can be determined. This load
capacitor must be sufciently large to lter out the dither
signal at the load.
相关PDF资料 |
PDF描述 |
|---|---|
| LM3622MX-4.2/NOPB | BATTERY CHARGE CONTROLLER, PDSO8 |
| LTC4266AIUHF-4#PBF | POWER SUPPLY MANAGEMENT CKT, PQCC38 |
| LS2815S/CKA | 1-OUTPUT 30 W DC-DC REG PWR SUPPLY MODULE |
| LS2540-9ERD1TB1 | 2-OUTPUT 100 W AC-DC REG PWR SUPPLY MODULE |
| LME0312D | 1-OUTPUT 0.25 W DC-DC REG PWR SUPPLY MODULE |
相关代理商/技术参数 |
参数描述 |
|---|---|
| LT4180EGN-TRPBF | 制造商:LINER 制造商全称:Linear Technology 功能描述:Virtual Remote Sense Controller |
| LT4180IGN#PBF | 功能描述:IC PWR SUPPLY CONTROLLER 24SSOP RoHS:是 类别:集成电路 (IC) >> PMIC - 电源控制器，监视器 系列:Virtual Remote Sense™ 产品培训模块:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 标准包装:2,500 系列:- 应用:多相控制器 输入电压:- 电源电压:9 V ~ 14 V 电流 - 电源:- 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:40-WFQFN 裸露焊盘 供应商设备封装:40-TQFN-EP（5x5） 包装:带卷 (TR) |
| LT4180IGN#PBF | 制造商:Linear Technology 功能描述:VIRTUAL REMOTE SENSE CONTROLLER 制造商:Linear Technology 功能描述:IC, REMOTE SENSE CONTROLLER, SSOP-24 |
| LT4180IGN#TRPBF | 功能描述:IC CTLR REMOTE SENSOR 24SSOP RoHS:是 类别:集成电路 (IC) >> PMIC - 电源控制器，监视器 系列:Virtual Remote Sense™ 产品培训模块:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 标准包装:2,500 系列:- 应用:多相控制器 输入电压:- 电源电压:9 V ~ 14 V 电流 - 电源:- 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:40-WFQFN 裸露焊盘 供应商设备封装:40-TQFN-EP（5x5） 包装:带卷 (TR) |
| LT4180IGN-PBF | 制造商:LINER 制造商全称:Linear Technology 功能描述:Virtual Remote Sense Controller |
发布紧急采购，3分钟左右您将得到回复。