- 您现在的位置：买卖IC网 > PDF目录3544 > LT6402CUD-12#TRPBF (Linear Technology)IC DIFF AMP/ADC DVR 12DB 16-QFN PDF资料下载
参数资料
| 型号： | LT6402CUD-12#TRPBF |
| 厂商： | Linear Technology |
| 文件页数： | 4/16页 |
| 文件大小： | 0K |
| 描述： | IC DIFF AMP/ADC DVR 12DB 16-QFN |
| 标准包装： | 2,500 |
| 放大器类型： | 差分 |
| 电路数： | 2 |
| 输出类型： | 差分 |
| 转换速率： | 400 V/µs |
| -3db带宽： | 300MHz |
| 电流 - 输入偏压： | 5µA |
| 电压 - 输入偏移： | 1000µV |
| 电流 - 电源： | 30mA |
| 电流 - 输出 / 通道： | 35mA |
| 电压 - 电源，单路/双路(±)： | 4 V ~ 5.5 V，±2 V ~ 2.5 V |
| 工作温度： | 0°C ~ 70°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 16-WFQFN 裸露焊盘 |
| 供应商设备封装： | 16-QFN-EP（3x3） |
| 包装： | 带卷 (TR) |
LT6402-12
12
640212fa
Figure 5. LT6402-12 Internal Filter Topology –3dB BW ≈75MHz
Figure 6. LT6402-12 Internal Filter Topology Modied
for 2x Filter Bandwidth (2 External Resistors)
prior to the ADC to limit input noise at the ADC, thereby
improving system signal to noise ratio. Both the unltered
and ltered outputs of the LT6402-12 can easily drive the
high impedance inputs of these differential ADCs. If the
ltered outputs are used, then cutoff frequency and the
type of lter can be tailored for the specic application if
needed.
Wideband Applications
(Using the +OUT and –OUT Pins)
In applications where the full bandwidth of the LT6402-12
is desired, the unltered output pins (+OUT and –OUT)
should be used. They have a low output impedance;
therefore, gain is unaffected by output load. Capacitance
in excess of 5pF placed directly on the unltered outputs
results in additional peaking and reduced performance.
When driving an ADC directly, a small series resistance
is recommended between the LT6402-12’s outputs and
the ADC inputs (Figure 4). This resistance helps eliminate
any resonances associated with bond wire inductances of
either the ADC inputs or the LT6402-12’s outputs. A value
between 10Ω and 25Ω gives excellent results.
between the two ltered outputs. This resistor/capaci-
tor combination creates ltered outputs that look like a
series 50Ω resistor with a 42pF capacitor shunting each
ltered output to AC ground, giving a –3dB bandwidth of
75MHz.
The lter cutoff frequency is easily modied with just a
few external components. To increase the cutoff frequency,
simply add 2 equal value resistors, one between +OUT and
+OUTFILTERED and the other between –OUT and –OUTFIL-
TERED (Figure 6). These resistors are in parallel with the
internal 50Ω resistor, lowering the overall resistance and
increasing lter bandwidth. To double the lter bandwidth,
for example, add two external 50Ω resistors to lower the
series resistance to 25Ω. The 42pF of capacitance remains
unchanged, so lter bandwidth doubles.
To decrease lter bandwidth, add two external capacitors,
one from +OUTFILTERED to ground, and the other from
–OUTFILTERED to ground. A single differential capacitor
connected between +OUTFILTERED and –OUTFILTERED
Figure 4. Adding Small Series R at LT6402-12 Output
Filtered Applications
(Using the +OUTFILTERED and –OUTFILTERED Pins)
Filtering at the output of the LT6402-12 is often desired
to provide either anti-aliasing or improved signal to noise
ratio. To simplify this ltering, the LT6402-12 includes an
additional pair of differential outputs (+OUTFILTERED and
–OUTFILTERED) which incorporate an internal lowpass
lter network with a –3dB bandwidth of 75MHz (Figure 5).
These pins each have an output impedance of 50Ω. Inter-
nal capacitances are 14pF to VEE on each ltered output,
plus an additional 14pF capacitor connected differentially
APPLICATIONS INFORMATION
640212 F04
LT6402-12
–OUT
+OUT
8
5
10Ω TO 25Ω
ADC
640212 F05
50Ω
VEE
14pF
LT6402-12
–OUT
+OUT
50Ω
14pF
–OUTFILTERED
+OUTFILTERED
8
7
6
5
FILTERED OUTPUT
(75MHz)
VEE
640212 F06
50Ω
14pF
LT6402-12
–OUT
+OUT
50Ω
14pF
–OUTFILTERED
FILTERED OUTPUT
(150MHz)
+OUTFILTERED
8
7
6
5
相关PDF资料 |
PDF描述 |
|---|---|
| TSW-143-07-T-D | CONN HEADER 86POS .100" DL TIN |
| TSW-138-05-T-D | CONN HEADER 76POS .100" DL TIN |
| LT1490ACDD#TRPBF | IC OPAMP R-R IN/OUT DUAL 8DFN |
| LT1638CDD#TRPBF | IC OPAMP R-R IN/OUT DUAL 8DFN |
| RC0805FR-0797K6L | RES 97.6K OHM 1/8W 1% 0805 SMD |
相关代理商/技术参数 |
参数描述 |
|---|---|
| LT6402CUD-20 | 制造商:LINER 制造商全称:Linear Technology 功能描述:300MHz Low Distortion, Low Noise Differential Amplifier/ ADC Driver (AV = 20dB) |
| LT6402CUD-20#PBF | 功能描述:IC DIFF AMP/ADC DRVR 16-QFN RoHS:是 类别:集成电路 (IC) >> Linear - Amplifiers - Instrumentation 系列:- 产品培训模块:Differential Circuit Design Techniques for Communication Applications 标准包装:1 系列:- 放大器类型:RF/IF 差分 电路数:1 输出类型:差分 转换速率:9800 V/µs 增益带宽积:- -3db带宽:2.9GHz 电流 - 输入偏压:3µA 电压 - 输入偏移:- 电流 - 电源:40mA 电流 - 输出 / 通道:- 电压 - 电源，单路/双路(±):3 V ~ 3.6 V 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:16-VQFN 裸露焊盘，CSP 供应商设备封装:16-LFCSP-VQ 包装:剪切带 (CT) 产品目录页面:551 (CN2011-ZH PDF) 其它名称:ADL5561ACPZ-R7CT |
| LT6402CUD-20#TR | 制造商:Linear Technology 功能描述:DIFF-AMPLIFIER, 300MHZ, 400V/US, QFN-16, No. of Amplifiers:1, Input Offset Volta 制造商:Linear Technology 功能描述:DIFF-AMPLIFIER, 300MHZ, 400V/US, QFN-16, No. of Amplifiers:1, Input Offset Voltage:1mV, Gain dB Max:20dB, Bandwidth:300MHz, Amplifier Case Style:QFN, No. of Pins:16, Supply Voltage Range:4V to 5.5V, Slew Rate:400V/s, MSL:- |
| LT6402CUD-20#TRPBF | 功能描述:IC DIFF AMP/ADC DRVR 16-QFN RoHS:是 类别:集成电路 (IC) >> Linear - Amplifiers - Instrumentation 系列:- 产品培训模块:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 标准包装:1 系列:- 放大器类型:电流检测 电路数:1 输出类型:- 转换速率:- 增益带宽积:125kHz -3db带宽:- 电流 - 输入偏压:- 电压 - 输入偏移:100µV 电流 - 电源:1.1µA 电流 - 输出 / 通道:- 电压 - 电源，单路/双路(±):- 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:4-WFBGA，CSPBGA 供应商设备封装:4-UCSP（2x2） 包装:剪切带 (CT) 其它名称:MAX9634WERS+TCT |
| LT6402CUD-6 | 制造商:LINER 制造商全称:Linear Technology 功能描述:300MHz Low Distortion, Low Noise Differential Amplifi er/ ADC Driver (AV = 6dB) |
发布紧急采购，3分钟左右您将得到回复。